Concrete beam reinforced

This study focuses on evaluating short-term deflections of reinforced concrete beams according to the Vietnamese Standard on the Design of Concrete and Reinforced Concrete Structures (TCVN 5574:2018) by comparing them with simulated results obtained from Abaqus software.

9p viengfa 28-10-2024 1 1   Download

In this study, we propose a machine learning technique for estimating the shear strength of CRC beams across a range of service periods. To do this, we gathered 158 CRC beam shear tests and used Artificial Neural Network (ANN) to create a forecast model for the considered output.

12p viengfa 28-10-2024 3 2   Download

This study presents the application of six single algorithm-based models of artificial intelligence, such as artificial neural network (ANN), support vector machine (SVM), classification and regression trees (CART), linear regression (LR), general linear model (GENLIN), and automatic Chisquared interaction detection (CHAID) to predict the residual flexural capacity of corroded RC structures.

12p vibecca 01-10-2024 1 1   Download

A finite element model using a multi-fiber approach is proposed in this paper for the analysis of reinforced concrete (RC) members using fiber-reinforced polymer (FRP) reinforcements, with a specific focus on the effect of pure torsion. The main objective of this study is to develop a numerical finite element model to predict the behavior of RC beams with FRP reinforcement under pure torsional effects.

14p vibecca 01-10-2024 3 2   Download

A truss model supplementing the concrete contribution is introduced in this paper to predict the shear strength of concrete beams reinforced with various types of FRP bars. The contributions from truss and direct strut mechanisms are considered in the analytical model. The truss model which has struts at various angles considering concrete contribution is derived in this paper.

13p vibecca 01-10-2024 1 0   Download

This study shows that the stirrups corrosion should receive more attention in the serviceability limit state due to its considerable effect on flexural behavior. Based on a parametric study, it shows that the effect of the crosssection loss of tension reinforcements on the load-carrying capacity of the corroded beam is more significant than the bond strength reduction.

14p vifilm 24-09-2024 3 1   Download

This paper deals with the effect of steel fiber amounts and the interaction between the fiber amount and stirrup ratio on the shear behavior and capacity of reinforced concrete (RC) deep beams with steel fibers.

13p vifilm 24-09-2024 2 1   Download

The paper investigates the flexural performance of reinforced concrete beams in which fly ash from Vinh Tan power station was used to replace original Portland cement in the proportions of 0%, 10%, 20% and 40% by weight.

13p vifilm 24-09-2024 1 1   Download

This paper has experimentally investigated a total of eight RC specimens that were carefully designed and fabricated with the main objective is to evaluate the effect of corrosion of longitudinal reinforcement without anchorage on the structural behavior of corroded RC slender beams without stirrups.

12p vifilm 24-09-2024 3 1   Download

The dependence of load-carrying capacity on span length of beams, which contained a combination of normal strength concrete (NC) - High-performance fiber-reinforced concrete (HPFRC), was investigated in this study.

12p vifilm 24-09-2024 2 1   Download

The elasto-plastic characteristics of plain concrete are inevitably affected by the loading rate. This paper presents an experimental investigation on the effect of loading rate on flexural behavior of concrete and reinforced concrete (RC) beams, which was carried out with Walter+bai electro-hydraulic servo system.

8p vifilm 24-09-2024 1 1   Download

In this paper, two beam specimens have been studied to investigate the flexural performance of RC beams strengthened with carbon fiber-reinforced polymer (CFRP) sheets and the interfacial behavior between CFRP and concrete.

15p vifilm 24-09-2024 3 1   Download

In this paper, a simplified calculation method based on Russian design standard SP 468.1325800.2019 is introduced to determine the flexural strength of RC T-beams when exposed to ISO 834 standard fire.

13p vifilm 24-09-2024 4 1   Download

This paper introduces general principles and gives analytical clarifications of the stirrups design at ambient condition and shear strength analysis for reinforced concrete (RC) beams at fire condition according to Russian design standards SP 63.13330.2012 (SP 63) and SP 468.1325800.2019 (SP 468), respectively.

15p vifilm 24-09-2024 6 2   Download

Beam-column joints play an important role, affecting the earthquake response of reinforced concrete (RC) frames. This paper introduces the results of experimental research on the failure and deformation of the joints, as well as the causes of these behaviors.

8p viyoko 24-09-2024 4 1   Download

This paper presents an experimental programme conducted on a number of six reinforced concrete (RC) beams in order to investigate the developments of strain and stress, moment-curvature relationship, failure mode and the ultimate strength on normal sections (USoNS) of this type of basic structural element.

9p viyoko 24-09-2024 2 1   Download

This paper addresses the strength and deformation capacity of slender columns retrofitted by externally bonded Carbon Fiber-Reinforced Polymers (CFRP) subjected to seismic loading. The behaviour of RC columns depending on the CFRP confinement (carbon CFRP jacket) and on flexural reinforcement (carbon plates) was analysed by a nonlinear finite element method based on multilayer shell element and multifiber beams with plasticity and damage models.

7p viyoko 24-09-2024 2 1   Download

This study investigated experimental bearing capacity of corroded reinforced concrete beams. Six testing beams were made of concrete having compressive strength of 25 MPa, with the dimensions of 80 x 120 x 1200 mm. They were divided into two groups depending of tension reinforcement ratio.

11p viyoko 24-09-2024 3 1   Download

In the present study, from recent experimental results of asymmetrical loading tests on SFRC beams without stirrups, three NLFE models have been validated and further developed to evaluate the impact that the ratio of shear span-to-depth (a/d) and the compressive strength of steel fiber concrete (SFC) have on the shear behavior and shear strength of SFRC beams without stirrups.

15p vifaye 20-09-2024 5 1   Download

Steel corrosion affects the failure mechanism of deteriorated reinforced concrete (RC) beams. Meanwhile, there is a lack of research on the shear behavior of corroded RC beams, particularly corroded steel fiber reinforced concrete (SFRC) beams. This paper investigates the shear behavior of corroded SFRC beams with a 1.5 shear span-to-depth ratio.

14p vifaye 20-09-2024 3 1   Download