Corrosion rate

This study shows several empirical models to predict the corrosion rate and their limits of application. The predicted values of steel corrosion rate using four empirical models are compared with the measured values of a series of 55 experimental samples collected from the literature.

10p vifilm 24-09-2024 1 1   Download

This study investigated experimental bearing capacity of corroded reinforced concrete beams. Six testing beams were made of concrete having compressive strength of 25 MPa, with the dimensions of 80 x 120 x 1200 mm. They were divided into two groups depending of tension reinforcement ratio.

11p viyoko 24-09-2024 3 1   Download

To screen the biodiesel property by the novel Ultrasonic method. To find out the corrosion inhibition rate of neat oil by Mass loss method. SEM analysis were carried out to evaluate the efficacy of neat oil as a green inhibitor.

226p spiritedaway36 26-11-2021 21 4   Download

The corrosion rate of the CT3 steel in 1 N and 2 N hydrochloric acids was measured by electrochemical polalization method. The measuring values of icorrosion showed that alcoholoamines influence on the inhibition corrosion of the CT3 steel in the hydrochloric acid solution and these values are increased in the order: monoethanolamine < diethanolamine < triethanolamine. In the solution of HCl 1 N and 2 N, the inhibition on the corrosion of steel CT3 of mixture of alcoholamines and potassium iodide is more effective than partial components.

5p uocvong04 24-09-2015 59 5   Download