Design and implementation

This project is focused on study of active P2P nodes along with the analysis of the undocumented communication methods employed in many of these large unstructured networks. This is achieved through the design and implementation of an efficient P2P monitoring and crawling toolset.

193p longtimenosee02 03-01-2024 12 4   Download

Magnetic bearing systems have received much attention in the research community for the past decades. Its inherent nonlinearity and open-loop instability present challenges for controller design. This thesis investigates and designs model predictive control (MPC) systems for an experimental Active Magnetic Bearing (AMB) laboratory system. A host-target development environment of real-time control system with hardware in the loop (HIL) is used for implementation of the predictive control systems. In this thesis, both continuous and discrete time model predictive controllers are studied.

172p runthenight05 01-03-2023 9 3   Download

This thesis presents a pro–active research work motivated by the prospect of the imminent implementation of the regulatory requirement for pedestrian protection, Global Technical Regulation–9 (GTR–9) (United Nations Economic Commission for Europe 1998) in the near future. To meet the performance criteria for pedestrian protection head impact, it is vital to incorporate the required design parameters into the hood design process at an early stage. These main design parameters are architectural and changing them late in the vehicle design process is very expensive and difficult to implement.

244p runthenight05 01-03-2023 11 3   Download

The design proposed in this thesis aims to reduce the distortion in Class-D Amplifier output at the cost of increased complexity in the implementation. The thesis is focussed on the DSP components of the unique design. State-ofthe-art FPGAs have been used as the implementation platform for these systems due to advantages such as abundant logic resources, ease of programming and re-configurability. The results demonstrate advantages of SWL processing systems in terms of efficient hardware utilization.

130p runthenight07 01-03-2023 7 3   Download

Model Predictive Control (MPC) refers to a class of algorithms that optimize the future behavior of the plant subject to operational constraints. The merits of the class algorithms include its ability to handle imposed hard constraints on the system and perform on-line optimization. This thesis investigates design and implementation of continuous time model predictive control using Laguerre polynomials and extends the design approaches proposed in to include intermittent predictive control, as well as to include the case of the nonlinear predictive control.

162p runthenight07 01-03-2023 9 4   Download

This thesis emphasizes on implementing and experimentally demonstrating innovative fabrication solutions for micro-scale metamaterials designed to operate in the terahertz electromagnetic regime. Microfabrication is a conventional fabrication technique that has been employed to fabricate metamaterials operating at terahertz frequencies.

81p runthenight07 01-03-2023 7 4   Download

This thesis proposes and implements a new and novel solution on simulators and real devices to solve the mobility problem in a VPN. The new solution adds mobility support to existing L2TP/IPsec (Layer 2 Tunneling Protocol/IP Security) tunnels. The new solution tunnels Layer 2 packets between VPN clients and a VPN server without using Mobile IP, without incurring tunnel-re-establishment at handoff, without losing packets during handoff, achieves better security than current mobility solutions for VPN, and supports fast handoff in IPv4 networks.

123p runthenight07 01-03-2023 5 4   Download

The primary value of this work and the main input into the research of this topic is, in the opinion of the author, in highlighting the psychological effects of implementing design management into an organization. The awakening of a „creator‟ in each and every worker, and the creation of individual satisfaction with the job and the working environment not only raises the productivity and quality of output, but also improves the psychological climate within the organization and raises the feelings of self-worth and quality of life of its employees.

172p runthenight07 01-03-2023 10 3   Download

The research design adopted to address this problem utilised mixed data collection methodologies. In order to determine what was happening in the industry as a whole, a specially designed survey was conducted utilising both web-based and traditional paper-based instruments. This provided valuable quantitative data about the rate of uptake, types of companies and so on. To complement this, a focus group of selected representatives within the industry was conducted to delve more deeply into motivations behind the decision to adopt the technology and the perceived benefits derived from it.

166p runthenight04 02-02-2023 16 2   Download

The thesis "Evaluating climate change mitigation and adaptation considerations in the Victorian planning system, Australia" is structured as follows: Chapter one: introduction; chapter two: climate change and the land use planning context: a review of literature; chapter three: policy and institutional framework for land use planning and climate change in Victoria; chapter four: research design; chapter five: assessing the state planning framework for awareness and analysis of climate change; chapter six: assessing local land-use implementation and action on climate change; chapter seven: c...

199p runthenight04 02-02-2023 9 4   Download

The purpose of the research: Research on designing and implementing teaching topic-based integrated subjects accordance with Kolb‟s experience models on non-metallic chemistry with topics to develop the students‟ collaborative problem solving competence, thereby contributing to innovating teaching methods and improving the quality of teaching chemistry in high schools according to the orientation of developing students' capacity.

27p tunelove 10-06-2021 17 5   Download

Purpose of the research: To design and implement digital experiments on the viewpoint of research-based teaching in teaching some concepts on the topics of Point-Mass Dynamics and Conservation Laws – Physics 10 in different stages of the knowledge achieving process to enhance students’ high-level problem solving competency.

26p thebadguys 08-06-2021 24 5   Download

This paper provides a survey of Implementation and Validation involved in Memory Built in Self-Test (MBIST). This paper comprises of the various strategies involved in the implementation and Validation of the Memory Built in Self-Test (MBIST).

8p lucastanguyen 01-06-2020 18 1   Download

The primary objective is to study the effectiveness of implementing lean manufacturing techniques and to identify and analyze any related issues and industrial common challenges or problems in lean manufacturing implementation. In this study Descriptive Research design is used.

5p guineverehuynh 18-06-2020 21 1   Download

The paper describes the modelling of primary pumps in advanced sodium cooled reactors using the TRACE code. Following the implementation of the models, the results obtained in the analysis of different design basis transients are compared with the simplifying approximations used in reference models.

7p christabelhuynh 30-05-2020 13 1   Download

We propose here to implement an optimization methodology of the blankets design with regards to various parameters such as the local spectrum or the mass to be loaded, with the objective of minimizing the final neutron source of the spent assembly while maximizing the transmutation performances of the blankets.

9p christabelhuynh 30-05-2020 11 0   Download

In this paper, we have provided hands-on experience in systematic design, implementation and flight test of an atmospheric data acquisition flying vehicle as a standard CanSat telemetry mission. This system is designed for launching from a rocket at a separation altitude about 1000-meter.

12p tohitohi 19-05-2020 11 2   Download

The implementation of the thesis is aimed to: Designing a model for evaluation of the competitiveness of the garment firms which is applicable to the scope of the study; Building a model for analysis of factors affecting the competitiveness of the garment firms; Identifying the current and predictable status of the competitiveness of garment enterprises in the region when compared with each other and with garment firms outside of the region.

14p change06 14-06-2016 77 4   Download

This chapter is an introduction to the application layer. In the next eight chapters we introduce common client-server applications used in the Internet. In this chapter, we give a general picture of how a client-server program is designed and give some simple codes of their implementation. The area of network programming is a very vast and complicated one; it cannot be covered in one chapter. We need to give a bird’s-eye view of this discipline to make the contents of the next eight chapters easier to understand.

20p tangtuy09 26-04-2016 56 4   Download

Towards an Agent Oriented approach to Software Engineering describes a methodology for agent oriented software engineering, called tropos. Tropos is based on three key ideas. First, the notion of agent and all the re lated mentalistic notions (for instance: goals and plans) are used in all phases of software development, from the early analysis down to the actual implementation.

6p namdmcist 24-05-2015 46 4   Download