Design properties

In kinematic synthesis and analysis of planar mechanisms the designer must define a geometry and set of motions for a design task. This paper will focus on how to determine the forces or torques acting on the planar mechanism by numerical method when acceleration and dynamic properties of the linkage are known.

9p viling 11-10-2024 1 0   Download

The aim of this study was to design and characterize a NdFeO3-based photocatalyst prepared by sol-gel method for treatment of oily wastewater. Different characterization techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), UV–vis spectrophometer were used to elucidate the structure, morphology, surface functional groups, and optical absorption properties of the prepared NdFeO3 photocatalyst.

6p vikwong 29-09-2024 2 1   Download

Mechanical behaviour of bituminous mixtures is characterized by the great thermal sensitivity and the large viscous effects. This paper focuses on the linear viscoelastic (LVE) behaviour of bituminous mixtures that is considered for pavement design.

10p vifilm 24-09-2024 1 1   Download

In this paper, a simplified calculation method based on Russian design standard SP 468.1325800.2019 is introduced to determine the flexural strength of RC T-beams when exposed to ISO 834 standard fire.

13p vifilm 24-09-2024 4 1   Download

The main parameters of this device are calculated from the ratio of shear stress and normal stress at the fatigue of the asphalt concrete according to the Mohr-Coulomb failure criterion. Test results with asphalt specimens show that the device is stable, the acting vertical loads were smaller and more stable.

6p viyoko 24-09-2024 2 1   Download

This modeling is performed on an experimental data set of complexes, where the metal ions of these complexes include transition ion metals and lanthanide ion metals. We use these models to develop a series of new thiosemicarbazone and their complexes; simultaneously, the complexes are worked out the stability constants from the novel models.

9p dianmotminh02 03-05-2024 7 2   Download

This study revealed that the major contributing descriptors of 2D QSAR studies are DeltaEpsilonB and DeltaPsiA and 3D QSAR model proves the steric as well as electrostatic effects determine the binding affinity for the drug development. The results of the current computational studies are useful for further designing novel chemical entities of anti-microbial agent.

19p dianmotminh02 03-05-2024 8 3   Download

The effect of machining parameters on the surface roughness in dry-turning Ti6Al4V alloy using an experimental design method was investigated. A mathematical equation based on the response surface methodology was established to fully understand the influence of machining parameters (cutting speed, feed rate, and depth of cut) on the surface roughness.

9p viwarmachine 01-07-2023 11 3   Download

The dynamic analysis is a necessity in the design, manufacturing and maintenance of structures. The analytic solutions are not available for most practical cases and the Finite Element Method (FEM) is not reliable due to the joint problem, unclear loading, material properties and numerical error. In this paper, we present a way to find modes shape of 3D Frame by FEM program using Matlab.

8p vidoctorstrange 06-05-2023 7 3   Download

A retaining wall constructed on expansive soil can be subjected to lateral swelling pressures due to soil swelling, which may cause a significant horizontal deformation and bending of the retaining wall. In Australia, it is generally assumed that the backfill behind a retaining wall is non-expansive material. Therefore lateral swelling pressures induced by expansive soils are ignored in routine design.

115p runthenight07 01-03-2023 12 3   Download

While it is recognised that knitted fabrics may have their place in firefighting PPC, especially for undergarments, from the point of view of fire performance, strength and presentation, woven fabric constructions appear to be more suitable for work wear applications. Hence, this study is concerned with developing and testing a range of functional, woven Station Wear fabrics designed to enhance flame protection, durability and thermo-physiological comfort properties. In trying to improve all three aspects, a compromise in the properties of fabrics developed would be very likely.

184p runthenight04 02-02-2023 12 3   Download

The aim of this project was to design, fabricate and characterise multifunctional structural composites incorporating phase change materials for thermal management applications. The specific research objectives to achieve this goal were formulated as follows: Investigate effective methods to integrate microencapsulated PCMs into glass fibrereinforced epoxy composites; Evaluate the mechanical properties of micro-PCMs enhanced FRP composites and investigate associated failure mechanisms; Study the thermal management effectiveness of micro-PCMs enhanced FRP composites.

125p runthenight04 02-02-2023 9 3   Download

The current research is undertaken by performing Computational Fluid Dynamics (CFD) simulations for a 2D aerofoil fitted with a shock control bump at a transonic flow condition. Reynolds-Averaged Navier-Stokes equation coupled with turbulence models is adopted to solve the flowfield. The bump has a conventional geometric feature which consists of a ramp, a crest and a tail, and it has eight variants for which the designed parameters are reasonably specified according to the compressible aerodynamics theory.

84p runthenight04 02-02-2023 7 3   Download

The thesis consists of five chapters which aim to investigate the mechanical properties and fabricating processes of different biomedical Ti scaffolds, with the structure presented: Chapter 1 is a generalized introduction to the content of the thesis, including the background, scopes and objectives of the research. In Chapter 2, a comprehensive literature review is presented. Chapter 3 presents the design and fabrication of the Ti scaffolds. In Chapter 4, the mechanical properties of the fabricated Ti scaffolds were analyzed.

109p runthenight04 02-02-2023 6 4   Download

Geotechnical problems are complicated to the extent and cannot be expected in other areas since non-uniformities of existing discontinuous, pores in materials and various properties of the components. At present, it is extremely difficult to develop a program for tunnel analysis that considers all complicated factors.

9p vibentley 08-09-2022 15 4   Download

The objectives of the present study are: To design and produce functional samples of woven single-layer, fire-resistant fabrics made from natural, FR man-made cellulosics, and high-performance synthetic blended yarns; to determine the physiological consequences and health risks associated with wearing PPC in hot, humid environments in relation to metabolic heat production and physical work for firefighters trying to maintain the balance between protection and comfort, and its implication on the required Station Wear fabric properties.

184p runordie3 06-07-2022 9 3   Download

We have investigated the time-dependent seismicity model of the earthquake occurrence on a regional basis through the North Anatolian Fault Zone (NAFZ). To that end, the studied region has been subdivided into 7 seismogenic zones considering the seismotectonic criteria, and then regional time and magnitude predictable (RTIMAP) model has been performed. Intervened times and magnitudes of main shocks produced in each zone have predictive properties defined by the RTIMAP.

20p tanmocphong 29-01-2022 30 1   Download

Bài giảng Thiết kế hệ thống nhúng (Embedded Systems Design) - Chương 6 (Bài 11): Công nghệ thiết kế. Những nội dung chính trong chương này gồm có: Tự động: tổng hợp; kiểm thử: đồng mô phỏng phần cứng/phần mềm; sử dụng lại: nền tảng dựa trên sở hữu trí tuệ intellectual property (IP); Mô hình quá trình thiết kế.

17p lovebychance03 13-07-2021 33 6   Download

This thesis studied the soil and the soil properties in the North Central region and proposed reasonable and safe solutions for the design and the construction of compacted earth dams. It meets the requirements for development of economic, social security and defense of the country.

27p dolphintaletale 23-04-2021 25 7   Download

In Vietnam, lotus plants are widely grown. Some parts of the lotus plant have been used as a tradition medicine. The lotus plant is easy to find, inexpensive, non-toxic and accepted by many Vietnamese people as a means of treating diabetes, and yet data on the mechanism or even effectiveness of lotus leaf on diabetes mellitus was not known. The present study was designed to evaluate the hypoglycemic effect of lotus leaf on mice which had alloxan induced diabetes.

10p tamynhan8 04-11-2020 16 3   Download