Simulation results
-
This study focuses on evaluating short-term deflections of reinforced concrete beams according to the Vietnamese Standard on the Design of Concrete and Reinforced Concrete Structures (TCVN 5574:2018) by comparing them with simulated results obtained from Abaqus software.
9p viengfa 28-10-2024 0 0 Download
-
This paper evaluates an energy harvesting strategy for UAVs from sunlight and laser beams on cloudy days with a low-level cloud layer. The channel models and harvested powers for both cases are considered and analyzed using mathematical equations and simulation results.
7p viengfa 28-10-2024 1 1 Download
-
This paper develops an Artificial Neural Network (ANN) model based on 96 experimental data to forecast the dynamic modulus of asphalt concrete mixtures. This study applied the repeated KFold cross-validation technique with 10 folds on the training data set to make the simulation results more reliable and find a model with more general predictive power.
9p viengfa 28-10-2024 4 1 Download
-
This study utilizes 3D simulations to assess the influence of four different ECAP routes on the mean strain and strain homogeneity on the M1 copper plate. After six passes, the simulation results significantly improved the mean strain and strain homogeneity.
5p vifilm 11-10-2024 1 0 Download
-
In this paper, three conformal cooling channel designs are proposed for obtaining uniform cooling over the molded parts. The research is conducted by using CAE software (MOLDEX 3D) to simulate the injection process and compare the results of three conformal cooling channel designs with molded part cooling by moldbase.
8p vifilm 11-10-2024 0 0 Download
-
Through the process of analysing related documents and object characteristics in FMCG companies, paper aim to build vehicle roung with me window (CVRTW) model to optimize the delivering process, thus satisfying customer demand. To ensure the quality of the results, the model will be solved using the simulated annealing algorithm (SAalgorithm).
8p vifilm 11-10-2024 1 0 Download
-
This paper presents experimental and numerical investigations to assess the relative fire structural resistance of thermo-mechanically compressed (or densified) spruce wood. The simulated thermal profiles, the mass loss as well as the charring depths were compared to the experimented results showing a fairly good agreement.
5p vibecca 01-10-2024 0 0 Download
-
This study presents numerical results regarding subsonic flow characteristics over axisymmetric boattail models equipped with longitudinal grooves, with the number of grooves ranging from 2 to 12.
12p vibecca 01-10-2024 1 0 Download
-
This work is devoted to conducting a new study for global dynamics and numerical simulation of a discrete-time computer virus propagation model, which was constructed in our recent work. By utilizing well-known results on asymptotic stability of discrete-time dynamical systems, we establish the global asymptotic stability of a unique viral equilibrium point, whereas only its local asymptotic stability was previously analyzed.
8p viyoko 01-10-2024 6 1 Download
-
This article presents the main results of using a simulation tool to predict time and optimize the resource utilization for the transportation of materials processes in the construction project on Phu Quy island.
14p viyoko 01-10-2024 2 0 Download
-
In this article, we explore the operation of the LEACH (Low Energy Adaptive Clustering Hierarchy) protocol - a protocol compatible with low-energy sources and propose a solution to improve efficiency in wireless sensor networks. The simulation results show that our solution is better in terms of the number of packets reaching the base station and the average lifetime of the sensor nodes.
9p viyoko 01-10-2024 3 0 Download
-
In the paper, 3L-MPC algorithm with fast calculation is proposed to control many objectives such as unit power factor, capacitor voltage balance and switching frequency reduction. In addition, the outer PI controller is used to adjust the DC-bus voltage. The simulation results demonstrated the excellent performance of the proposed method, both in transient and steady states.
8p viyoko 01-10-2024 1 1 Download
-
In the paper, an ADRC approach is applied to position control problem of 1DOF-FLM. The system model is derived based on Euler-Lagrange equations formulating a foundation for calculating ADRC parameters. Simulations results show good performance of the closed-loop system.
6p viyoko 01-10-2024 2 1 Download
-
Photoelasticity images of pulsed laser ablation in water and in air were simulated by Finite Element Method. In the paper "Compare transient stress induced in in-air and in-water laser ablation using simulation method", the Von Mises stress distribution in the target is deduced from the simulated images and is compared between the two-ablation regimes. The result confirms that pulse laser ablation in the water can induced a stress about 100 times higher than that induced in ablation in the air.
4p xuanphongdacy09 29-09-2024 3 1 Download
-
The paper analyzes and determines the optimal parameters of tuned mass damper to reduce torsional vibration for the machine shaft. The research steps are as follows. First, the optimal parameters of tuned mass damper for the shafts are given by using the maximization of equivalent viscous resistance method. Second, a numerical simulation is performed for configuration of machine shaft to validate the effectiveness of the obtained analytical results.
9p vifilm 24-09-2024 1 1 Download
-
In globalization, the selection of the specifications for design practices depends on the investment agency. For example, steel truss structures can be designed using various codes, such as AISC 360-16 or EC 3. Although most specifications have recently been written in the limit state design approaches, which codes resulting in reasonable design solutions are rarely investigated.
14p vifaye 20-09-2024 1 1 Download
-
The C-EPS steering system's performance is affected by a range of technical parameters, including steering column inertia, steering column stiffness, column damping, rack stiffness, rack damping, and steering column pinion radius. The simulation results in both the frequency domain and the time domain indicate the influence of structural parameters on the system characteristics.
7p tuongbachxuyen 05-08-2024 3 1 Download
-
In this study, we propose to build an equivalent 2D model to replace the 3D model of corrugated composite sheets, by the method of homogenization, to study the nonlinear mechanical behavior of corrugated core composite sheets. This model helps to significantly reduce the calculation time as well as the model building time. The model homogeneity is confirmed by comparing the numerical simulation results of the 2D model and the 3D model.
8p dathienlang1012 03-05-2024 2 0 Download
-
This paper describes an investigation of fluid flow through two tandem circular cylinders using Lattice-Boltzmann Method in direct numerical simulation. The diameter ratio of two circular cylinders, D1/D2 varies from 0.5 to 1.5, and spacing ratio (L/D2) varies from 1.5 to 10, whereas the Reynolds number of 100 is considered. The numerical model is well validated by comparing the results with those obtained in the literature.
8p dathienlang1012 03-05-2024 6 1 Download
-
This study utilized the GIS-based Soil and Water Assessment Tool (SWAT) model to simulate the flow of Vu Gia - Thu Bon river basin at two hydrological stations - Nong Son and Thanh My, during the calibration period (2004 - 2010) and the verification period (2011 - 2015). The evaluation results of both periods, as measured by the NSE and R2 indexes, were found to be above 0.75.
12p dianmotminh02 03-05-2024 3 3 Download