Time finite element

Photoelasticity images of pulsed laser ablation in water and in air were simulated by Finite Element Method. In the paper "Compare transient stress induced in in-air and in-water laser ablation using simulation method", the Von Mises stress distribution in the target is deduced from the simulated images and is compared between the two-ablation regimes. The result confirms that pulse laser ablation in the water can induced a stress about 100 times higher than that induced in ablation in the air.

4p xuanphongdacy09 29-09-2024 3 1   Download

In this study, for the first time an isogeometric finite element formulation for bending analysis of functionally graded porous (FGP) plates reinforced by graphene platelets (GPLs) embedded in piezoelectric layers is presented. It is named as PFGP-GPLs for a short.

15p vifilm 24-09-2024 1 1   Download

In the field of structural dynamics, the structural responses in the time domain are of major concern. There already exist many methods proposed previously including widely used direct time integration methods such as ones in the β-Newmark family, Houbolt’s method, and Runge–Kutta method.

12p vifilm 24-09-2024 3 1   Download

This thesis deals with the finite element simulation of spot welded joint in crash analysis. Spot welding is a very common joining process in the automotive industry. It is cost effective and it provides a very fast production rate of automotive body components. Despite this advantage, spot welds are very susceptible to various types of loading conditions. Therefore they are prone to failure, if not designed properly, during their service life time. Therefore it is very important to understand the behaviour of spot welds and their failure characteristics.

243p runthenight05 01-03-2023 9 4   Download

In this method, the internal DOFs are separated from the boundary DOFs, and decomposed onto a basis of static modes, and a basis of fixed interface modes [Craig et Bampton, 1968]. The use of a reduced basis for the fixed interface modes makes it possible to reduce the size of the system to be solved, and therefore to save the computational time compared to a classical finite element computation involving the complete system.

7p vishivnadar 17-01-2022 28 1   Download

In this paper, the technique is applied to analyze transient heat transfer problems. In order increase time efficiency, a modelreduction technique, namely the proper orthogonal decomposition (POD), is employed. The idea is that a given large-size problem is projected into a small-size one which can be solved faster but still maintain the required accuracy.

10p larachdumlanat127 02-01-2021 10 2   Download

In this paper, the subproblem method with using edge finite elements is proposed for coupling subproblems via several steps to treat and deal with some troubles regarding to electromagnetic problems that gets quite difficulties when directly applying a finite element method. In the strategy subproblem method, it allows a complete problem to define into several subproblems with adapted dimensions. Each subproblem can be solved on its independent domain and mesh without performing in whole domain or mesh. This easily supports meshing and decreases computing time.

7p larachdumlanat127 02-01-2021 18 2   Download

Simulation and visualization of the mechanical components have become a predominant phase during the design and the production stages. Several means are used to improve the design and to reduce study time.

8p tohitohi 19-05-2020 19 3   Download

This paper describes the one-dimensional, transient heat conduction in a rectangular piece of Pyinkado (Xylia xylocarpa) with cross grain and in an orthotropic wooden cylinder. Computerized solutions of a generalized, nonlinear heat equation are derived by discretizing the time domain using finite element techniques.

9p slimzslimz 08-12-2019 14 1   Download

Structural Testing is used to verify the static strength, or fatigue strength of a component by applying measured loads to the test item. Testing can be done to failure, to contractual requirements or to validate finite element model predictions. DTB has successfully completed thousands of structural tests on items ranging in size and complexity from simple coupons to entire aircraft. Fatigue Testing is carried out with the objective of determining the relationship between the stress range and the number of times it can be applied before causing failure....

114p phongk2t1 20-12-2010 136 21   Download