Ultimate bearing capacity

Part 2 book "Geotechnical engineering - Principles and practices of soil mechanics and foundation engineering" includes content: Shallow foundation i - ultimate bearing capacity; shallow foundation ii - safe bearing pressure and settlement calculation; shallow foundation iii - combined footings and mat foundations; deep foundation i - pile foundation; deep foundation ii - behavior of laterally loaded vertical and batter piles, deep foundation iii - drilled pier foundations; foundations on collapsible and expansive soils.

549p dianmotminh04 12-07-2024 0 0   Download

Ebook "The bearing capacity of building foundations" describes the different ways of ultimate bearing capacity determination of building foundations. This four-chapter book considers the effect of a horizontal force acting on a foundation. It also examines a situation where, beneath the foundation level in the zone of influence of the foundation there are two layers of soil, including the case where the second, lower layer is formed by incompressible rock.

232p giangdongdinh 28-05-2024 3 2   Download

This study investigates the ultimate bearing capacity of a rigid strip footing on a sandy slope using the Rigid Plastic Finite Element Method (RPFEM). To accurately represent a wide range of frictional conditions at the footing roughness, a new interface element was introduced, capable of accommodating both perfectly rough and perfectly smooth conditions.

6p vigojek 02-02-2024 0 0   Download

The study extensively investigated the ultimate bearing capacity (UBC) of an eccentrically loaded foundation under two scenarios (horizontal sandy soil and sandy soil slope), utilizing the Rigid Plastic Finite Element Method (RPFEM). To precisely simulate a diverse range of frictional conditions on the foundation surface roughness, a novel joint element is introduced, capable of accommodating both perfectly rough and perfectly smooth foundations.

6p vigojek 02-02-2024 3 1   Download

Part 1 of ebook "Soil testing, soil stability and ground improvement: Proceedings of the 1st GeoMEast international congress and exhibition, Egypt 2017 on sustainable civil infrastructures" provides readers with contents including: study of slope stability (open pit mining, algeria); prediction of drained settlement and ultimate bearing capacity for stone columns supported foundation; considerations on the stiffness of sensitive soft soils; a novel field device for the measurement of soil collapsibility;...

203p thamnhuocgiai 24-09-2023 4 2   Download

This this paper, optimization of ultimate bearing capacity of river-to-sea ships structure based on structural analysis using finite element method. The ultimate strength of the hull girder, and calculates the ultimate strength bending moment of the hull girder when B/D = 3.0 and B/D = 3.5 with the calculation program based on finite element method (B is breadth of the ship, D is depth of the ship).

4p viengels 25-08-2023 2 2   Download

In this study, construction sequence and prediction of axial bearing capacity of M-pile on cohesive soil were introduced. M-pile analysis used with outer diameter of 318.5 mm and thickness of 12.7 mm. The analysis results show that the ultimate bearing capacity prediction of M-pilein soft clay soil considerably increase compared with bored and cast-in-place piles with the same diameter and depth thanks to multiple blades welded along the pile shaft.

8p viberkshire 09-08-2023 4 3   Download

This paper presents an experimental investigation into the tensile strength degradation in curved glass and carbon reinforcement of TRC specimens. The results show that the ultimate tensile load decreases as the diameter of the semi-circle parts reduce. At the same diameter, the carbon TRC specimens have a higher tensile load-bearing capacity than glass textile-reinforced concrete.

10p viargus 20-02-2023 5 3   Download

The novel equivalent material concept, proposed originally by the author, was utilized together with the mean stress and the point stress failure concepts to predict the load-carrying capacity of O-notched ductile steel plates under pure tension.

12p tohitohi 19-05-2020 12 0   Download

The authors have carried out studies on long term behavior of concrete-filled steel tubular (CFST) column by numerical methods based on experimental data that is described by a visco-elastic model, and the age-adjusted effective modulus (AAEM) method is adopted to modelling creep behavior of the concrete core, which is evaluated by the Finite Element Method (FEM) combined Prony's series interpolation by using ANSYS software.

9p nguyenminhlong19 22-04-2020 42 0   Download

In this paper, the ultimate load capacities of shell foundations on unreinforced and reinforced sand were determined by laboratory model tests. A series of loading tests were carried out on model shell footing with and without single layer of reinforcement. The tests were done for shell foundation at different shell embedment depth and subgrade density. The results were compared with those for flat foundations without reinforcement. The model test results were verified using finite element analysis using program PLAXIS.

11p trinhthamhodang1 16-11-2019 27 1   Download