Wear resistant

The objectives of the present study are: Justifying the possibility of using laser cladding technology as a repair method for refurbishment of worn railway axles without jeopardizing their fatigue properties; Analysis of crack initiation and propagation in laser clad samples.

130p runthenight07 01-03-2023 8 3   Download

While it is recognised that knitted fabrics may have their place in firefighting PPC, especially for undergarments, from the point of view of fire performance, strength and presentation, woven fabric constructions appear to be more suitable for work wear applications. Hence, this study is concerned with developing and testing a range of functional, woven Station Wear fabrics designed to enhance flame protection, durability and thermo-physiological comfort properties. In trying to improve all three aspects, a compromise in the properties of fabrics developed would be very likely.

184p runthenight04 02-02-2023 12 3   Download

Studying, analyzing and evaluating the basic factors affecting the wear resistance of the shear cutting drum, such as coal strength, the geometry of the cutting teeth, materials of cutting teeth, the cutting angle. Cutting depth, cutting feed and cutting speed are the basis for selecting the appropriate factors in fabrication, using the cutting teeth of the shearer.

27p closefriend09 16-11-2021 21 2   Download

This paper proves that the principal wear mechanism is abrasive and shock-abrasive wear; and analyzes materials test methods and techniques for wear rate identification.

11p lucastanguyen 01-06-2020 26 2   Download

The feedback produced by operating Sodium-cooled Fast Reactors (SFRs) has shown the importance of material tribological properties. Where galling or adhesive wear cannot be allowed, hardfacing alloys, known to be galling-resistant coatings, are usually applied on rubbing surfaces.

11p christabelhuynh 29-05-2020 9 0   Download

Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành y học dành cho các bạn tham khảo đề tài: Patients presenting with miliaria while wearing flame resistant clothing in high ambient temperatures: a case series

4p toshiba24 07-12-2011 39 3   Download

Metal cutting puts extreme demands on the tool and tool material through conditions of high forces, high contact pressures, high temperatures, and intense chemical attack by difficult to cut work materials. In addition, the tool geometry and cutting conditions in terms of sharp edges, cyclic engagement and presence of cutting fluid will add to the severity. Most often cutting tools are used close to their ultimate resistance against these loads, especially to the limiting thermal and mechanical stresses. ...

14p cuunien 20-12-2010 115 17   Download