Mssql Replication(step 5)

Chia sẻ: TRẦN THỊ THANH HẰNG | Ngày: | Loại File: PDF | Số trang:16

Thêm vào BST

Báo xấu

110
lượt xem 16
download

Download Vui lòng tải xuống để xem tài liệu đầy đủ

Bước V. Tạo một đăng ký phần này của bài báo mô tả cách tạo ra một đăng ký vào bản bạn tạo ra với các Wizard New đăng ký. 1. Trong SQL Server Management Studio, nhấp chuột phải vào bản bạn đã tạo. 2. Click vào mục đăng ký mới. Click vào đây để xem ảnh nhỏ. Hình 40. Bắt đầu đăng ký mới 3.The Wizard Trang mới đăng ký giới thiệu Wizard là displayed.Click Next Click vào đây để xem ảnh nhỏ.

Chủ đề:

Creating a Subscription

Bình luận(0) Đăng nhập để gửi bình luận!

Lưu

Nội dung Text: Mssql Replication(step 5)

Step V.Creating a Subscription This section of the article describes how to create a subscription to the publication you created with the New Subscription Wizard. 1. In SQL Server Management Studio, right-click the publication you created. 2. Click New Subscriptions. Click this bar to view the small image. Figure 40. Starting the New Subscription Wizard 3.The New Subscription Wizard introduction page is displayed.Click Next Click this bar to view the small image.
Figure 41. New Subscription Wizard introduction page 4.On the Publication page, the publication you created is displayed and selected by default. Click Next Click this bar to view the small image.
Figure 42. Selecting the publication 5.On the Distribution Agent Location page, select the location at which the Distribution Agents will run. If there are less than fifty Subscribers, we recommend the default of running the Distribution Agent at the Distributor. a. Select Run all agents at the Distributor (push subscriptions) b.click Next Click this bar to view the small image.
Figure 43 Specifying the Distribution Agent location 6.On the Subscribers page, select the Subscriber instance that will receive the replicated data from the Oracle Publisher. You must also specify whether the Subscriber is another instance of SQL Server or a different type of database provider. a. Click Add Subscriber. b. Select Add SQL Server Subscriber. c.Click Next Click this bar to view the small image.
Figure 44. Adding a Subscriber 7.Specify the connection information for the SQL Server Subscriber. a. In the Connect to Server dialog box, select the instance of SQL Server that will be the Subscriber. b. Specify the authentication method that is used to connect to the Subscriber. c. Click Connect to save the connection information. Note: In the configuration used for this paper, the Distributor and Subscriber are on the same instance of SQL Server. Therefore the connection settings in the following illustration are the same as those shown earlier in the paper. Click this bar to view the small image.
Figure 45. Specifying connection properties for the Subscriber 8.Next, you select the database on the Subscriber that will receive the replicated data. If the subscription database does not exist, you can create it by selecting New database. a. In the Subscription Database list, select a database, or click New database. b. (Optional) To add other Subscribers, click Add Subscriber and repeat the process. For each Subscriber, you must connect to a Subscriber and specify a subscription database. c. Click Next. Click this bar to view the small image.
Figure 46. Specifying a subscription database 9.The Distribution Agent Security page of the wizard lets you configure Agent security for each Subscriber that you have added, to ensure that the Distribution Agents have the correct permissions. Click the browse button (...) for each Subscriber to open the Distribution Agent Security dialog box Click this bar to view the small image.
Figure 47. Reviewing connection properties 10.In the Distribution Agent Security dialog box, select the Windows user that you configured before you started the New Subscription Wizard. The Windows user that you select must meet the following conditions: a. The user is included in the PAL. b. The user is a member of the db_owner fixed database role in the subscription database. c. The user has read permissions on the snapshot share. Specify the Windows user under which the Distribution Agent will run. a. Type the SQL login account info. b. Click OK to save changes and close the dialog box c. On the Distribution Agent Security page, click Next. Click this bar to view the small image.
Figure 48. Specifying Distribution Agent security 11.By default, the Distribution Agent runs continuously and delivers changes from the Publisher to the Subscribers as changes become available. a. Verify that Run Continuously is selected in the Agent Schedule column. b. Click Next. Click this bar to view the small image.
Figure 49. Scheduling synchronization 12.Use the Initialize Subscriptions page of the wizard to specify how the publication is initialized. When the Distribution Agent first runs for a subscription, by default it delivers the complete snapshot of initial data to the Subscriber. This initialization occurs immediately after the New Subscription Wizard finishes. a. If the Subscriber already contains all the initial tables and data, clear the Initialize option on the Initialize Subscriptions page. b. Select Immediately in the Initialize When list to specify when initialization will occur. c. Click Next. Click this bar to view the small image.
Figure 50. Setting initialization options 13.On the Wizard Actions page, you specify when the subscription will be created, and whether the subscription configuration is saved in a script. We recommend that you select the check box for scripting so that you will have a copy of the replication configuration for future reference. a. Select both check boxes. b. Click Next. Click this bar to view the small image.
Click this bar to view the small image.
Figure 51, 52. Generating the publication and script file 14.On the Complete the Wizard page, verify that all options are correct. Click Finish Click this bar to view the small image.
Figure 53. Verifying wizard options 15.The New Subscription Wizard now saves the configuration information that you have entered and creates the subscription. Click Close after the steps are complete Click this bar to view the small image.
Figure 54. Creating the subscription 16.After the wizard has completed, you can view the subscriptions you created in SQL Server Management Studio. a. In Object Explorer, expand Replication. b. Expand Publications. c. Right-click the publication you created and click Refresh. d. Expand the publication. Click this bar to view the small image.
Figure 55. Viewing the new subscription

CÓ THỂ BẠN MUỐN DOWNLOAD

THÔNG TIN

TRỢ GIÚP

HỖ TRỢ KHÁCH HÀNG

Theo dõi chúng tôi

Chịu trách nhiệm nội dung:

Nguyễn Công Hà - Giám đốc Công ty TNHH TÀI LIỆU TRỰC TUYẾN VI NA

LIÊN HỆ

Địa chỉ: P402, 54A Nơ Trang Long, Phường 14, Q.Bình Thạnh, TP.HCM

Hotline: 093 303 0098

Email: support@tailieu.vn