Xếp hình con cừu

Chia sẻ: Văn Ngô Viết Anh | Ngày: | Loại File: PDF | Số trang:2

Thêm vào BST

Báo xấu

186
lượt xem 26
download

Download Vui lòng tải xuống để xem tài liệu đầy đủ

Designed and diagrammed by Andy Carpenter (1998). Use a sheet of strong white paper (white on both sides) with dimensions of 1: 1.8. A sheet 30cm by 54cm will produce a model approximately 14cm by 9cm. Wet fold the paper for best results.

Chủ đề:

Bình luận(0) Đăng nhập để gửi bình luận!

Lưu

Nội dung Text: Xếp hình con cừu

Sheep Designed and diagrammed by Andy Carpenter (1998). Use a sheet of strong white paper (white on both sides) with dimensions of 1: 1.8. A sheet 30cm by 54cm will produce a model approximately 14cm by 9cm. Wet fold the paper for best results. E A B A B D C D C F 1. Precrease before wet folding. 3. 2. Front leg Body Horn A B E F D C 5. Rabbit ear the horn, thin the vertical 4. Enlarged view. Thin 6. Enlarged view. Reverse fold both sides raw edge from head to front legs, then the face/horns & fold in of the back leg. The fold on the right sink fold the front legs with two layers of half. Points A & D from trisects the angle. Repeat behind. paper on each side.Crimp fold to form the step 3 are hidden by back leg. Repeat behind. another layer of paper. 9. Repeat behind. 8. Front left side of model cut away. 7. Repeat behind. Rabbit ear fold both front legs.The one shown is the far side front leg. Copyright Andy Carpenter (1998)
13. Push the face down and pull the 10. 11. Repeat for all 4 feet. 12. Like this... back of the head up. Fold to shape head and horns. Repeat behind. 16. The final sheep. 14. Repeatedly crimp fold to curve 15.Fold to shape the body. the horn. Repeat behind. Repeat behind. Copyright Andy Carpenter (1998)