![](images/graphics/blank.gif)
Cuttings treated
-
An approach on the prediction of sound transmission loss for finite clamped composite sandwich plates with foam core is described in the paper. Sandwich plates are treated as being orthotropic and the apparent bending stiffness is calculated for the two principle directions. The apparent bending stiffness of sandwich plate is estimated by finite element calculation on beam elements cut from the sandwich plate.
10p
dathienlang1012
03-05-2024
3
0
Download
-
Cutting force (CF) is one of the most important factors in improving machining efficiency. It directly affects the cutting tool life and the quality of the product. This paper presents the results of building a model to predict the value of the cutting force components using a back-propagation (BP) neural network when dry and hard turning SKD11 steel after heat treatment.
7p
vimarillynhewson
02-01-2024
5
3
Download
-
Lemon balm (Melissa officinalis L.) is a herb species with many benefits for health. Lemon balm is effective in reducing anxiety, stress, improving insomnia, treating viruses and some digestive diseases,... This species can be propagated by sowing seeds or cuttings or dividing branches from the root. In this study, the propagation experiments using seeds and cuttings were conducted to find a suitable propagation method for lemon balm in Vietnam.
4p
vialfrednobel
21-12-2023
2
2
Download
-
"Standard Specification for Steel Bars, Alloy, Standard Grades" covers hot-wrought alloy steel bars. Bar applications include forging, heat treating, cold drawing, machining and many structural components. Hot-wrought alloy steel bars are produced in cut lengths and coils; the manufacturer should be consulted regarding sections and sizes available in coils, produced to a chemical composition.
4p
hth_hn_vn
10-12-2023
9
4
Download
-
This specification covers single-reduced black plate produced from low carbon, cold-reduced steel, furnished in coils and cut sizes, for use in the manufacture of containers, closures, signs, toys and other products, as well as for plating applications.
2p
hth_hn_vn
10-12-2023
4
4
Download
-
This specification covers high-strength, low-alloy, hotrolled steel sheet and strip and cold-rolled sheet having improved formability when compared with steels covered by Specifications A 606 and A 607. The product is furnished as either cut lengths or coils and is available in four-strength levels, Grades 50, 60, 70, and 80 (corresponding to minimum yield strength (see Table 1)). The steel is killed, made to a fine grain practice, and includes microalloying elements such as columbium, titanium, vanadium, zirconium, etc. The steel may be treated to achieve inclusion control.
3p
hth_hn_vn
10-12-2023
6
4
Download
-
This study investigates the optimal ranges of high-speed machining and temperature that achieve a balance between cutting efficiency, cost reduction, improvement in surface quality, and extension of tool life.
10p
viironman
02-06-2023
4
1
Download
-
Previous studies suggest an association between age within schoolyear and attention-deficit hyperactivity disorder (ADHD). Scotland and Wales have different school entry cut-of dates (six months apart) and policies on holding back children. We aim to investigate the association between relative age and treated attention deficit hyperactivity disorder (ADHD) in two countries, accounting for held-back children.
9p
viferrari
28-11-2022
11
2
Download
-
In this study ultrasound treated fresh cut kiwifruit slices were coated with different concentrations (0.6, 0.8, and 1%) of chitosan. Sensory evaluation was conducted in linguistic terms for the kiwifruit slices with a panel of 15 well-trained judges to understand the consumer preference.
5p
mudbound
10-12-2021
7
1
Download
-
Salsola crassa M.B. is one of the most successful plants used against industrial pollutants. In this study, we selected young Salsola crassa M.B. plants from their natural habitats. Some plants were irrigated with industrial wastewater containing Fe, Co, Ni, Cu, Pb, and Zn, and others were irrigated with tap water for 3–4 months. Afterwards, the shoots and roots were randomly cut, separated, fixed, dyed, and observed using light microscopy. Structural changes were analyzed by stereology. There were some differences in appearance and structure between the treated and control samples.
13p
tudichquannguyet
29-11-2021
13
1
Download
-
The propagation of the hibiscus may be carried out with cutting and grafting. Stem cutting and cleft grafting are the most important method of vegetative propagation. The cuttings treated with high concentration of IBA, performed the best in rooting and survival percentage, whereas, the mist house growing condition was found effective in increasing the success rate of the cuttings.
4p
cothumenhmong11
11-05-2021
11
2
Download
-
In this study, hard wood cuttings of Hibiscus rosa-sinenis Cultivar Red Single were treated with nine different dose of gamma rays (1 to 5 k R) and ten different concentrations of EMS ranging from 0.1% to 1.0%. The results revealed that gradual reduction in survival of cuttings, shoot length, leaf length and leaf width with increase in dosage of gamma rays and EMS. However gamma rays treated plants showed significant gradual reduction in growth rate than the EMS treated plants. Based on probit analysis, LD50 (Lethal dose) value for gamma radiation and EMS have been fixed as 2.81 kR and 0.
8p
chauchaungayxua10
19-03-2021
16
2
Download
-
Malunion of phalangeal and metacarpal bones are often associated with impairment of hand function and pose a challenging task for treating surgeons in most cases. When applicable, corrective osteotomy is the treatment of choice, where the affected bone is cut to correct malalignment using chisels or saws.
7p
vitennessee2711
02-02-2021
8
2
Download
-
Total knee arthroplasty using patient-specific instrumentation (TKA-PSI), which are disposable cutting block guides generated to fit each patient’s 3-dimensional knee anatomy, has been developed to treat patients with end-stage osteoarthritis of the knee. Surrogate markers such as radiographic malalignment have been well investigated, however, patient-important outcomes are not well examined to elucidate the efficacy of TKA-PSI.
18p
vivermont2711
28-01-2021
4
1
Download
-
Cubitus varus is a complex three-dimensional deformity. Various osteotomies have been introduced to correct this complex deformity. The objective of the present study was to evaluate clinical and functional outcomes of adult cubitus varus deformity treated with translation step-cut osteotomy.
9p
vimariana2711
22-12-2020
17
1
Download
-
This research carried out at the experimental station in Peza (Tirana district) has sought to test the treatment of the lignified cuttings of kiwi, cv. Hayward, with rooting hormones. Several cuttings collected were stratified until the planting period. During February, cuttings were cut 15 – 20 cm long, with a diameter of 20 mm at the base. Six bathing treatments were applied: IBA 1000 ppm and 500 ppm, AIA 1000 ppm and 500 ppm as well as Control. IBA Gel was applied at the time of planting.
6p
kethamoi6
29-06-2020
14
1
Download
-
The effect of modified atmosphere packaging (MAP) with chemical treatment on physicochemical quality fresh-cut pears was investigated. Cut-pears were subjected to the following conditions: (1) MAP + Treated - (1% citric acid + 1% CaCl2) and stored in MAP at 8 ºC, (2) Treated - (1% citric acid + 1% CaCl2) and stored at room temperature and regular atmosphere, (3) MAP + Untreated - No chemical treatment and stored in MAP at 8 ºC, (4) Untreated - No chemical treatment and stored at room temperature and regular atmosphere.
10p
angicungduoc5
14-06-2020
15
0
Download
-
Gladiolus is very important cut flower crop in floriculture industry and maintaining the quality of cut spikes is very imperative topic. Therefore, the current study was conducted to investigate the effects of salicylic acid (SA) on keeping the quality and extending the vase life of gladiolus cut spikes. Gladiolus spikes were put in holding solutions of SA at 0.2, 0.4, 0.6 and 0.8 mM while control spikes were placed in distilled water. The vase life of gladiolus spikes was considerably extended due to SA application relative to untreated spikes. Treating gladiolus spikes with SA at 0.
11p
angicungduoc5
14-06-2020
4
0
Download
-
For obtaining better combination of properties some of the parameters such as ageing time, solutionization temperature, ageing temperature, retrogression temperature and retrogression time are chosen meticulously. Machining studies were conducted on as-cast and RRA treated samples. The influence of cutting parameters on the surface roughness is studied. The optimum cutting parameters are evaluated through Taguchi DoE.
7p
cleopatrahuynh
01-06-2020
8
1
Download
-
Effect of plant growth regulators on rooting behavior of stem cuttings of terminalia chebula (Retz.)
The effect of IBA and IAA (Auxins) concentrations were examined to mass multiply plus trees of Terminalia chebula (Retz.) through vegetative propagation via rooting of stem cuttings. The experiment was conducted in a completely randomized design (CRD) with three replications, One year old leafless branch cuttings were taken from selected superior phenotypes from the surrounding environs of SHUATS, Allahabad.
8p
cothumenhmong5
17-05-2020
12
1
Download
CHỦ ĐỀ BẠN MUỐN TÌM
![](images/graphics/blank.gif)