Dye adsorption

In the present work, CeO2 with different loading was embedded on reduced graphene oxide (rGO) by a simple one-pot hydrothermal method. The synthesized samples were characterized using XRD, EDX mapping, FESEM, and UV-Vis DRS techniques.

11p vifilm 11-10-2024 2 0   Download

In this study, Fe3O4/g-C3N4 composite was fabricated via facile hydrothermal techniques. The Fe3O4/g-C3N4 product was used as catalysts for degradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) degradation with ultrasonic-assisted and H2O2.

6p vikwong 29-09-2024 3 1   Download

Manufactured dyes are notably troublesome chemical toxins. The industrial wastes of these dyes are exceedingly noxious to aerobic and aquatic life and can cause compounds that show carcinogenic, mutagenic, and neurotoxic effects. In this study, cadmium imidazolate frameworks were synthesized by a solvothermal method from cadmium acetate and 2-methylimidazole in an ethanol/methanol mixture.

7p vikwong 29-09-2024 3 1   Download

The pH solution is one of the critical factors affecting the photo-Fenton degradation of dyes in wastewater. This study has shown the role and potential of the application of photocatalysts in the degradation of toxic organic compounds the wastewater.

5p vikwong 29-09-2024 3 1   Download

The results showed that GdFeO3 photocatalyst had a good performance under visible light irradiation. The remarkable enhancement photo-Fenton catalytic activity of GdFeO3 material could be attributed to its small particle size and narrow band gap energy.

6p vikwong 29-09-2024 2 1   Download

The aim of this study was to investigate the photocatalytic activity improving of TiO2, Ag-TiO2 as photocatalysts which immobilized on perlite granules to degrade MB from synthetic wastewater under solar light irradiation. The photocatalytic mechanisms induced by solar light responsive Ag-TiO2/perlite composite was also proposed to demonstrate the photodegradation of MB cationic dye.

7p vikwong 29-09-2024 3 1   Download

The results showed that the pseudo-second-kinetic model better described the adsorption kinetics of tartrazine on MoS2 and film diffusion was the rate-limiting step. In addition, the adsorption capacity of MoS2 was also performed with various organic dyes such as nile blue, janus green B, and congo red.

7p vikwong 29-09-2024 4 1   Download

In this research, Ag-Ag3PO4/Cellulose aerogel composite was synthesized using hydrothermal reduction and freeze-drying methods. By combining the photocatalytic activity of the semiconductor AgAg3PO4 and cellulose aerogel synthesized from agricultural waste sources, the synthesized Ag-Ag3PO4/Cellulose aerogel composite has overcome the disadvantages of pure Ag3PO4 and significantly improved the photocatalytic activity.

12p vikwong 29-09-2024 1 0   Download

In this study, graphene oxide (GO) was prepared by the Hummers method. GO/CS/PVA fibers were prepared by an electrospinning method. The structure, morphology and size of the electrospun materials were characterized by X – ray diffraction (XRD) and a scanning electron microscope (SEM).

7p vikwong 29-09-2024 2 1   Download

The novel composite nanomaterials were synthesized via a simple method from two natural clay mineral sources, graphite and halloysite. The materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), Brunauer-Emmet-Teller (BET) methods.

10p vikwong 29-09-2024 1 1   Download

The materials were then characterized by SEM, BET, AFM and XRD. The produced material was used to remove methylene blue (MB) from aqueous solution by batch adsorption. Results showed that the bentonite nanoplatelets gave high adsorption ability with Langmuir maximum adsorption capacity of 312.50 mg/g, which could be a good adsorbent for removing dyes and other toxic organics in wastewater.

5p vikwong 29-09-2024 2 1   Download

Ordered mesoporous carbon materials using MCF silica as hard template (OMC(MCF)) were synthesized. The synthesized OMC(MCF) materials were characterized by different techniques such as XRD, TEM, BET.

6p vikwong 29-09-2024 1 1   Download

This research focused on surveying the decomposition efficiency of methyl orange, alizarin yellow and mordant black -T in the systems without and with UV light in water: alone zero-valent iron; alone persulfate; both zero-valent iron and persulfate.

6p vikwong 29-09-2024 1 1   Download

This study focuses on the synthesis of V-doped TiO2 materials using a modified polyol method to enhance their efficiency. The obtained materials were characterized by various methods such as XRD, EDX, FTIR, SEM, TEMSAED, Raman, and UV-Vis DRS. The results indicated the crystalline anatase phase of TiO2, with spherical morphology and an average size of 30nm. The UV-DRS measurement demonstrated that doped materials have a lower bandgap than the pristine TiO2.

6p vikwong 29-09-2024 1 1   Download

In this study, we successfully synthesized a bimetallic metal-organic framework material Zn/Co-ZIF to start Peroxymonosulfate (PMS) for organic dye degradation in the water body. Material characterization was evaluated by advanced methods, such as XRD, FT-IR, SEM, EDX, and BET. The influence of different factors on methylene blue (MB) decomposition rate was investigated.

7p vikwong 29-09-2024 3 1   Download

Waste from Jackfruit has little economic value and often causes serious environmental problems. The conversion of jackfruit waste will help reduce waste treatment costs, provide a potential source of raw materials for the activated carbon (AC) and increase economic value. In this study, the ACs from the Jackfruit shell and pulp were synthesized by microwave assistance for removing organic dyes.

13p vidoctorstrange 06-05-2023 10 2   Download

This study aims to explore the potential of layered double hydroxides (LDHs) materials for the treatment of contaminated waters by organic pollutants, using a combined dual process, namely adsorptionphotocatalysis. A series of LDHs of ZnCr-X where (X ¼ Cl, SO4 and CO3) were synthesized and characterized by several techniques such as DRX, FTIR, BET, TEM, and UV-Visible spectrophotometry.

9p meyerowitz 25-12-2021 22 0   Download

Hydrotalcite-type (HT) materials based on ZnAlO and MgAlO have been prepared and investigated by various physico-chemical method: IR, XRD, BET... It was found that the HT structure depended on the nature and the atom ratio of the metals. The adsorption ability of the materials was tested with the reactive dyes Red 3BA as a model compound. The results indicated that the materials with the HT structure and atom ratio of Me2+ /Me3+ = 3 : 1 calcinated at < 500o C have the highest dyes removal. That could be related with the chemical characterization.

5p uocvong04 24-09-2015 79 5   Download

Waste generated for the during the red mud, an industrial ore, aqueous the byproduct, is recycled solution. such processing of were congo of bauxite red from adsorption kinetics Adsorption studied using dose, parameters time as dye concentration, Adsorption adsorption isotherms. dye was followed data The 4.05 adsorbent first rate both agitation The and red to and pH.

17p tudoia 06-04-2011 101 8   Download