Electrophoretic coating

The performance of carbon fiber (CF)ereinforced thermoplastic composites is influenced by the interfacial adhesion strength of the fiber and thermoplastic matrix. In this study, the electrophoretic coating of silane-grafted polyphenylene sulfide (PPS) particles on the CF surface was used to quantitatively control the interfacial adhesion between the CF and PPS matrix.

10p viberbers 09-08-2023 4 3   Download

The samples annealed at 150 C and 250 C showed a better optical absorption in the visible and the near infrared spectral regions with dominant characteristic peaks at 691.2 nm and 801.6 nm. Further studies assured that the EPC process yielded good quality and large area MoSe2 films with exotic structural, optical and nanomorphological characteristics that are highly suitable for functional devices.

7p meyerowitz 25-12-2021 9 1   Download

Herein, titanium (Ti3+) self-doped strontium titanate (SrTiO3), so-called blue SrTiO3, with a bandgap of 2.6 eV and favorable photocatalytic characteristics was fabricated through a facile and effective method. For electrochemical investigations, the electrophoretic deposition was applied to produce SrTiO3 thin films on (fluorine-doped tin oxide) FTO conductive substrates. The electrophoretic voltage of 20V and a process duration of 10 min were optimized to reach transparent and uniform coatings on FTO. The blue SrTiO3 reveals lower resistance (charge transfer resistance of 6.

10p tudichquannguyet 29-11-2021 4 2   Download