Engineering properties

Solubility parameters of carbon quantum dots (CQDs) are important physical properties to deploy CQDs in various applications such as organic light emitting diodes (OLEDs), light-converting materials in LEDs, and photoluminescent sensors for metal ion detection. Because of the low toxicity and tunable emission most CQDs have been designed to be water-soluble and biocompatible; oilsoluble CQDs that are essential for OLEDs are not yet explored.

8p viprimi 16-12-2024 2 0   Download

Lecture Electronic commerce - Chapter 17: Legal, Ethical, and Compliance Issues in EC learning objectives: Understand the foundations for legal and ethical issues in EC. Describe civil, intellectual property, and common law. Understand legal and ethical challenges and how to contain them. Explain privacy, free speech, and defamation and their challenges. Discuss the challenges caused by spam, splogs, and pop-ups. Describe types of fraud on the Internet and how to protect against it.

42p caphesuadathemtac 09-11-2021 16 4   Download

This dissertation aims to investigate the electrical impedance properties of fruits and vegetables, and explore the relationship between impedance and quality criteria. In particular, the present dissertation outlines experimental research conducted on relationships between impedance properties and fruit tastes as well as the impedance changes observed during ripening process. Impedance measurement to monitor moisture content changes in the progress of drying is also included in this research.

116p runthenight05 01-03-2023 8 3   Download

The focus of this study is to investigate its optical and conductive properties under different conditions of doping environments, temperature and polymerization conditions. Optical characterization technique such as UV-Visible spectroscopy is developed to carry out the investigation. The developed nanofibers have been demonstrated to possess optical and conductive properties to be dependent on doping variables. Study of these optical properties could prove very useful in the development of electrochromic devices and gas sensors.

103p runthenight07 01-03-2023 8 3   Download

The objectives of the present study are: Justifying the possibility of using laser cladding technology as a repair method for refurbishment of worn railway axles without jeopardizing their fatigue properties; Analysis of crack initiation and propagation in laser clad samples.

130p runthenight07 01-03-2023 8 3   Download

A retaining wall constructed on expansive soil can be subjected to lateral swelling pressures due to soil swelling, which may cause a significant horizontal deformation and bending of the retaining wall. In Australia, it is generally assumed that the backfill behind a retaining wall is non-expansive material. Therefore lateral swelling pressures induced by expansive soils are ignored in routine design.

115p runthenight07 01-03-2023 15 3   Download

One of the main objectives for this thesis is to provide an extensive literature review on the knowledge of the failure of trees in general and specifically Eucalyptus. By doing so, gaps in the literature and research will be revealed and then the remaining objectives will be selected experimental work filling the gaps for Eucalypts.

103p runthenight04 02-02-2023 5 2   Download

The following boundaries are considered in pursuing the proposed research study: This study is conducted on an experimental basis; Domestic hot water supply using evacuated tube solar thermal collectors has been selected as the applied context for this study; Paraffin has been chosen to be used as a PCM for this study due to its attractive techno-economic properties for use with solar thermal systems in domestic hot water applications; The effect of scale factor is not studied; The effect of the shape of the PCM container is not investigated in this study.

102p runthenight04 02-02-2023 14 2   Download

The main focus of this research is the composite comparison of steel fiber, polypropylene fiber and basalt fiber as it is a new category of hybrid fiber reinforcement in high performance high volume flyash concrete. Also many other researchers have studied incorporating individual fibers in high volume flyash concrete to improve the mechanical properties.

165p runthenight04 02-02-2023 6 2   Download

This research investigates a means of negating such shortcomings and reaping the benefits of both LPBF additive manufacturing and traditional manufacturing methods by joining such parts together using laser welding in the autogenous mode (no fillers required). Based on the literature review conducted in this field and the gaps identified, a two-stage methodology was utilised, as per following.

191p runthenight04 02-02-2023 7 5   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. Additively manufactured TPU mould is developed to cast complex concrete structures. A planar topologically optimized cantilever and a free-form 3D column are cast using the proposed TPU mould. Good surface quality is obtained for the cast concrete elements, and the moulds can be reused many times after cleaning.

98p runthenight04 02-02-2023 10 4   Download

The recent advances in the study of the unique capabilities of monolayer crystals had predicted piezoelectricity in two-dimensional (2D) group IV chalcogenides which are not present in their bulk forms. In this study, the predicted piezoelectric properties of was experimentally explored through Piezoelectric Force Microscopy (PFM). Tin Sulfide (SnS), Tin Selenide (SnSe), Germanium Sulfide (GeS), were exfoliated from their bulk forms by the top down methods of liquid sonication, while and Tin Disulfide (SnS2) mechanically exfoliated by tape.

82p runthenight04 02-02-2023 9 3   Download

The aim of this project was to design, fabricate and characterise multifunctional structural composites incorporating phase change materials for thermal management applications. The specific research objectives to achieve this goal were formulated as follows: Investigate effective methods to integrate microencapsulated PCMs into glass fibrereinforced epoxy composites; Evaluate the mechanical properties of micro-PCMs enhanced FRP composites and investigate associated failure mechanisms; Study the thermal management effectiveness of micro-PCMs enhanced FRP composites.

125p runthenight04 02-02-2023 12 3   Download

The current research is undertaken by performing Computational Fluid Dynamics (CFD) simulations for a 2D aerofoil fitted with a shock control bump at a transonic flow condition. Reynolds-Averaged Navier-Stokes equation coupled with turbulence models is adopted to solve the flowfield. The bump has a conventional geometric feature which consists of a ramp, a crest and a tail, and it has eight variants for which the designed parameters are reasonably specified according to the compressible aerodynamics theory.

84p runthenight04 02-02-2023 9 3   Download

The thesis consists of five chapters which aim to investigate the mechanical properties and fabricating processes of different biomedical Ti scaffolds, with the structure presented: Chapter 1 is a generalized introduction to the content of the thesis, including the background, scopes and objectives of the research. In Chapter 2, a comprehensive literature review is presented. Chapter 3 presents the design and fabrication of the Ti scaffolds. In Chapter 4, the mechanical properties of the fabricated Ti scaffolds were analyzed.

109p runthenight04 02-02-2023 6 4   Download

Steel fiber reinforced concrete (SFRC) is a multiple-composite material developed during the early 1970s. In SFRC, short steel fibers are randomly distributed in concrete. Steel fibers can prevent the development of micro-cracks inside the concrete and reduce the expansion and development of the macro-cracks, thus enhance mechanical performance of SFRC. However, there is lack of studies on the influence of flowability of fresh SFRC on the steel fiber distribution patterns and mechanical properties of hardened SFRC.

85p runthenight04 02-02-2023 8 4   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. The findings of this thesis will provide clear guidelines for the selection of processing parameters for additively manufactured TPU parts and the method of casting complicated concrete structures with additively manufactured TPU mould.

98p runordie3 06-07-2022 14 3   Download

Theoretical aim: An overview study of the production process, physicochemical properties and applicability of 2.5-dimethylfuran on on internal combustion engines (especially SI engines) to determine the reasearch gap, scope and plan; the theoretical basis study of combustion and emission of SI engines using DMF as fuel to examine the technical parameters and emissions of the engine when using DMF-gasoline blends on a gasoline engine.

28p closefriend09 16-11-2021 25 6   Download

Objective of the study: The general objective of this study is to produce catalysts of bimetallic oxides (Cu-Co), on porous materials (activated carbon, silica gel, MCM-41) to adsorb and oxidize VOCs, which is represented by toluene, a popular VOCs with particular properties of the BTEX group in many industrial factories, at low temperature.

144p armyofthedead 23-06-2021 22 2   Download

Equivalent inclusion approach is then developed to account for possible diversions, such as non-idealistic geometric forms of the inhomogeneities, imperfect matrix-inclusion contacts, filler dispersions, and when the particular values of the fillers’ properties are unspecified, using available numerical or experimental reference conductivity data for particular composites.

28p capheviahe27 23-02-2021 27 4   Download