Factor loading

Part 2 book "Practical electrical wiring" includes content: Installing service entrances and grounds; installing specific devices; finishing - installation of switches, receptacles, and luminaires; limited energy wiring; wiring for multiple circuits and specialized loads; modernizing old work; farm wiring; on site engine power generation and supply of premises wiring; manufactured homes, recreational vehicles, and parks; wiring apartment buildings.... and other contents.

426p dianmotminh04 12-07-2024 0 0   Download

Part 1 of ebook "Reinforced concrete designer's handbook (Tenth edition)" provides readers with contents including: introduction; safety factors, loads and pressures; structural analysis; materials and stresses; resistance of structural members; structures and foundations; electronic computational aids: an introduction; partial safety factors; loads; pressures due to retained materials; cantilevers and beams of one span; continuous beams; influence lines for continuous beams;...

217p mothoiphong 28-06-2024 1 1   Download

Part 1 of ebook "Reynolds’s reinforced concrete designers handbook (Eleventh edition)" provides readers with contents including: general information; design criteria, safety factors and loads; structural analysis; design of structural members; buildings, bridges and containment structures; loads, materials and structures; pressures due to retained materials; cantilevers and single-span beams;...

249p mothoiphong 28-06-2024 2 1   Download

The main contribution of this paper is to show a new AC/DC converter based on the rearrangement of the flyback converter. The proposed circuit only manages part of the energy and the rest is delivered directly from the source to the load. Therefore, with the new topology, the efficiency is increased, and the stress of the components is reduced. The rearrangement consist of the secondary of the flyback is placed in parallel with the load, and this arrangement is connected in series with the primary side and the rectified voltage source.

16p 63696369 20-06-2024 3 1   Download

Part 1 book "Power converter circuits" includes content: Switching and semiconductor switches, single phase uncontrolled rectifier circuits; single phase controlled rectifier circuits; three phase, half wave, uncontrolled (diode) bridge rectifier circuits; three phase half wave controlled bridge rectifier circuits; three phase full wave uncontrolled bridge rectifier circuits; three phase full wave controlled bridge rectifier circuits with passive load impedance; rectifier power factor and pulse width modulation controlled rectifier circuits.

304p dianmotminh03 09-06-2024 5 1   Download

The paper "The behavior analysis of bolted end-plate connections under static load by using finite element method" investigates the mechanical behavior of bolted end-plate beam-to- column connections with changes of thin of end-plate and size of bolts under bending moment. The finite element models are generated in ANSYS software, in specially all of meshes are hexahedral meshes as well as be continuous at welding. The results obtained from this study are validated based on three factors: loading capacity, moment resistance and joint rotation.

9p dathienlang1012 03-05-2024 2 0   Download

For biology students, the diversity, complexity, and abundance of content in this field yield a heavy study load. Hence, appropriate learning strategies are key in supporting learners’ academic success. In biology, the factors gender and interest hold a unique position within the natural sciences, as there is an academic imbalance to the disadvantage of male students.

11p viarnault 25-04-2024 3 1   Download

Part 2 book "Switching power supply design" includes content: Bipolar power transistor base drive circuits, mosfet and igbt power transistors and gate drive requirements, magnetic amplifier postregulators, analysis of turn on and turn off switching losses and the design of load line shaping snubber circuits, feedback loop stabilization, resonant converters, typical waveforms for switching power supplies, power factor and power factor correction, electronic ballasts - high frequency power regulators for fluorescent lamps,... and other contents.

419p dianmotminh00 22-04-2024 6 3   Download

Continued part 1, part 2 of ebook "Strength of materials II: Problems and solutions (Advanced topics)" includes the following main contents: Chapter 3 deals with the problem of dynamic loading; the method of problem-solving using dynamic factor is investigated for each of the three types of dynamic loading. Chapter 4 introduces the concept of limit state design of structural members; the most fundamental knowledge of limit state is provided together with its application on the design of axially-loaded members and flexural members.

73p khuynhlinhnguyet1009 05-04-2024 4 1   Download

The study showed that the acceptance level of the observed variables reached the Cronbach's Alpha confidence level above 0.7 and the Corrected Item - Total Correlation value of the accepted observed variable over 0.3. Research results with the absolute value of factor loading above 0.5 are optimal, and the observed variables are statistically significant. This study has identified the observed variables for the factors of the theoretical framework. The study results can establish a measurement for further quantitative research with an expanded research scope in the future.

9p longtimenosee07 29-03-2024 5 2   Download

The novelty that this paper identifies relates to the reduction of cost volatility in the global supply chain. This novelty is further seen in the proposition that blockchain can achieve this objective. Blockchain’s distributed ledger framework achieves improved inventory control, improved demand forecasting, and more efficient just-in-time productivity as factors to reduce cost-loading in the global supply chain.

10p longtimenosee06 27-03-2024 3 2   Download

Ebook "Environmental load factors and system strength evaluation of offshore jacket platforms" presents a study for the determination of environmental load factors for Jacket Platforms in Malaysia and a methodology to determine the life extension of aging platforms. The simplifie used for determining not only structural reliability but also safety factors. Its content is particularly interesting to design and maintenance engineers who are working in offshore or onshore industry.

347p nhanphanguyet 28-01-2024 5 2   Download

Bài viết "Sự hài lòng của khách khi sử dụng dịch vụ thẻ tín dụng tại Ngân hàng thương mại cổ phần Nam Á – Chi nhánh Phú Hữu" đưa ra một số kiến nghị nhằm nâng cao sự hài lòng của khách hàng khi sử dụng dịch vụ thẻ tín dụng tại Ngân hàng TMCP Nam Á – Chi nhánh Phú Hữu. Mời các bạn cùng tham khảo!

7p modungvanthu 13-12-2023 8 2   Download

Part 1 book "Livestock handling and transport" includes content: The importance of stockmanship to maintain high standards of handling and transport of livestock and poultry; welfare of transported animals - welfare assessment and factors affecting welfare; stress physiology of animals during transport; the effects of both genetics and previous experience on livestock behaviour, handling and temperament; behavioural principles of handling beef cattle and the design of corrals, lairages, races and loading ramps.... and other contents.

217p oursky09 12-11-2023 7 3   Download

In the paper, we propose a mathematical model that combines bottom erosion and riverbank failure mechanisms. The model incorporates high-performance GPUs (Graphics Processing Units) to enhance its computational efficiency and capability. It utilizes a set of equations, such as the Reynolds equations, sediment transport equations, and bed load continuity equation, to simulate the dynamics of flow, sediment transport, and changes in the riverbed.

22p vishekhar 01-11-2023 3 1   Download

Part 1 of ebook "Design of buildings for wind: A guide for ASCE 7-10 standard users and designers of special structures" provides readers with contents including: guide to the ASCE 7-10 standard provisions on wind loads; ASCE 7-10 wind loading provisions; regular and simplified approach - risk category, basic wind speed, enclosure, exposure, topographic factor; regular approach: steps common to all buildings/other structures (MWFRS and C&C); regular approach - structures other than buildings, MWFRS;...

122p dangsovu 20-10-2023 6 5   Download

The Axial Load Capacity (ALC) of Concrete-Filled Steel Tubular (CFST) structural members is regarded as one of the most crucial technical factors for the design of these composite structures.

17p visharma 20-10-2023 4 4   Download

This paper presents a short-term load forecasting model using the backpropagation neural network (BPNN) model. The proposed model is based on data on loads and factors that directly affect electricity demand, such as temperature, humidity, load over time in the past, etc., collected from the electricity market ISO New England.

8p viisac 15-09-2023 8 3   Download

Porous sunshade roof cover sheets installed on building roofs are new structures for mitigating heat absorption. Thus, there have been few studies on wind flow and its effects on windpermeable structures, and there is no provision for these structures in the major international wind load standards and codes.

8p vifriedrich 30-08-2023 4 2   Download

This draft is expected to be approved and officially published to replace the current standard TCVN 2737:1995. In the draft of this new standard, there are many contents, including wind load provisions. And this paper presents the key changes to wind load provisions of the new draft TCVN 2737:202x.

9p vifriedrich 30-08-2023 9 3   Download