![](images/graphics/blank.gif)
Film influence
-
This study demonstrates correlations between element diffusion behavior and notch-point formation in ACIGS films, which ultimately influence the resulting current circuit voltage and fill factor. Our findings delineate a novel approach for fabricating a suitably tailored band gap grading in ACIGS, which serves as a bottom subcell in tandem configuration.
10p
visergeyne
18-06-2024
0
0
Download
-
The alkyde paint has high gloss, hardness, and flexibility, good color retention of coating film. It is good for adhesion with wood, metal and others. However, there have been very few researches on alkyde paints in Vietnam recently. This paper is aimed at studying the influence of rate of Beckosol 6501-80 binder and solids powder as titanium oxide R, Lithopone, CaCO3 to quality of surface film of Alkyde paint.
11p
vilarry
01-04-2024
1
1
Download
-
This paper analyzes the influence and evaluates the characteristics of micro-cylindrical-post having different parameters to the superhydrophobicity of PUA film. Firstly, the structure and characteristics of Polyurethane Acrylate (PUA) material are introduced.
4p
vigojek
02-02-2024
3
1
Download
-
Ebook "Food packaging hygiene" is concerned with the connection between food packaging and the chemical composition of packaging materials. In terms of the food packaging hygiene, the influence of the containers on the contained foods is discussed. The book explores new and emerging risks related to food packaging materials in connection with the contained commodities.
137p
nhanphanguyet
28-01-2024
3
2
Download
-
Antimony telluride (Sb2Te3) thin films were deposited on to non-and conductive-glass substrates ‒ borosilicate (BRS), indium-doped tin oxide (ITO), and fluorine-doped tin oxide (FTO) using the doctorblading technique as a white slurry precipitated from the solution during a chemical bath reaction.
9p
viberbers
09-08-2023
7
3
Download
-
The preparation of controlled phases of the MoTe2 ultra-thin films, achieved by isothermal close space tellurization, is very important for the different applications from semiconductor sensors to unique nonsaturating magnetoresistance and strongly reinforced superconductivity.
8p
viberbers
09-08-2023
11
3
Download
-
The PdeCo alloy is a suitable candidate for the perpendicular magnetic recording and related applications. However, no research is available to clarify influences of local structures on the magnetic anisotropy of the PdeCo alloy.
11p
viberbers
09-08-2023
5
4
Download
-
The influence of carboxylic acid functionalized multi-walled carbon nanotubes (cMWCNTs) content on the properties of polystyrene (PS) nanocomposite (NC) films was investigated. The NC films were produced by a simple sonication assisted solvent blending technique.
13p
viberbers
09-08-2023
5
4
Download
-
Keterite Cu2ZnSnS4 (CZTS) thin films were fabricated by spray pyrolysis deposition using aqueous precursor solutions with and without the addition of HCl. The effects of HCl on the crystallinity, morphology and photovoltaic properties of CZTS thin films were investigated. The results showed that the presence of HCl had significant effects on the crystal growth, grain size, and surface morphology of the fabricated CZTS thin films resulting in the improvement of the photovoltaic properties of the solar cell.
6p
nhanchienthien
25-07-2023
7
3
Download
-
The study "Studies on film forming corrosion inhibitors on aluminium alloy, AA2024-T3" presents key aspects of the film forming behaviour of the selected inhibitors and the test methods used to evaluate the inhibitor induced films in a chloride solution. This study also aims to provide significant insights to the film tenacity, the influence of the molecular structure as well as the film stability in the absence of inhibitors to provide a deeper understanding of the film forming and film breakdown mechanisms.
154p
runthenight04
02-02-2023
6
1
Download
-
The thin films of SnO2 and Zn-doped SnO2 were deposited on glass wafer substrate by a compression sprayer system using SnCl2.2H2O and Zn(CH3COO)2.2H2O as precursors. The influence of the deposition temperature and Zn-doped contents on SnO2 and Zn-doped SnO2 crystal phase were investigated by XRD, respectively.
8p
vineville
08-02-2023
3
1
Download
-
Cellulose nanowhiskers (CWs) extracted from cotton fibers were successfully modified with distinct anhydrides structures and used as additives in poly(vinyl alcohol) (PVA) nanocomposite films. The surface modification of CWs was performed with maleic, succinic, acetic or phthalic anhydride to compare the interaction and action the carboxylic groups into PVA films and how these groups influence in mechanical properties of the nanocomposites.
10p
vihermione
06-01-2023
12
2
Download
-
This study demonstrates the potential of feruloylated arabinoxylan (AX) from wheat bran for the preparation of bioactive barrier films with antioxidant properties. We have comprehensively evaluated the influence of the structural features and chemical acetylation of feruloylated AX extracted by subcritical water on their film properties, in comparison with alkaline extracted AX and a reference wheat endosperm AX.
11p
viginny
30-12-2022
8
3
Download
-
Two main types of morphological features resulting in surface roughness were observed on alumina discs used as supports for zeolite membranes. These features can be described as hills and pits and it was shown that defects as cracks formed in the zeolite film at these locations of the support.
5p
vironald
15-12-2022
7
2
Download
-
This study is aimed to investigate the influence of substrate bias on thicknesses and hardness mechanical properties of arc deposition technology TiN coating which is prepared on the surface of SKD61 alloy and Silic. The thicknesses of coatings were detected by examining the cross-sectional optical microscope image base on Silic sample.
4p
viericschmid
12-01-2022
10
0
Download
-
Electrochemical properties of disulfiram, representative of highly significant bioactive compounds, were studied with a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) using square wave cathodic stripping voltammetry (SWCSV). The influence of various factors such as pH, buffer concentration, buffer composition, and SWCSV parameters on current response was investigated. The applicability of the developed method was tested in the determination of disulfiram in the commercial formulation Anticol.
9p
langthannam
29-12-2021
13
0
Download
-
This paper studied cultural hybridization as reflected in hero characters from 30 Thai action adventure films produced and released during 1997e2010. It was hypothesized that the characterization of the heroes in the action adventure films in question had been influenced by features of heroes in foreign films.
9p
guernsey
28-12-2021
9
0
Download
-
An enzymeless electrochemical sensor for detection of low amounts of H2O2 with the aid of Ag nanoparticles supported on conducting poly(vinylferrocene) (PVF) film was developed. Experimental results revealed that contribution of Ag nanoparticles led to remarkable improvement by means of reduction potential and reduction current. Influence of experimental parameters (i.e. polymeric film thickness, concentration of Ag precursor, immersion time in precursor solution, reduction time, and reduction potential) were investigated.
13p
tudichquannguyet
29-11-2021
8
1
Download
-
In this paper, the influence of shaft bearings lubricating oil pressure to the vibration characteristics of diesel generator shafting system is concerned. When the lubricating oil pressure increases, the oil film stiffness increases.
11p
wangxinling
23-07-2021
16
0
Download
-
Purpose: The purpose of thesis is to study the influence of temperature, pressure and dopant on the diffusion coefficient and ionic conductivity of the bulk material as CeO2, c-ZrO2, YDC and YSZ. For YDC and YSZ thin films, we find the thickness dependence of the lattice constant, diffusion coefficient and ionic conductivity
28p
tunelove
10-06-2021
10
2
Download
CHỦ ĐỀ BẠN MUỐN TÌM
![](images/graphics/blank.gif)