Finished surface roughness

This experimental study investigated the effects of milling conditions on the finished surface roughness. With four controllable factors-three levels (cutting velocity, feedrate, radial depth of cut, and cutter helix angle), the nineteen experiments were performed with performance measurements of surface roughness.

10p lucastanguyen 01-06-2020 36 2   Download

(BQ) In this paper, working current, working voltage, oil pressure, spark gap Pulse On Time and Pulse Off Time on Material Removal Rate (MRR) and Surface Finish (Ra) has been studied. Empirical models for MRR and Ra have been developed by conducting a designed experiment based on the Grey Relational Analysis. Genetic Algorithm (GA) based multi-objective optimization for maximization of MRR and minimization of Ra has been done by using the developed empirical models. Optimization results have been used for identifying the machining conditions.

10p xuanphuongdhts 27-03-2017 42 2   Download

(BQ) This paper is devoted to a study of the influences of EDM parameters on surface roughness for machining of 40CrMnNiMo864 tool steel (AISI P20) which is widely used in the production of plastic mold and die. The selected EDM parameters were pulsed current (8, 16 and 24 A), pulse time (2, 3, 4, 6, 12, 24, 48 and 100 s) and pulse pause time (2 and 3s). It was observed that surface roughness of workpiece and electrode were influenced by pulsed current and pulse time, higher values of these parameters increased surface roughness.

4p xuanphuongdhts 27-03-2017 51 4   Download