![](images/graphics/blank.gif)
Finite element results
-
The present paper considers the composite plate resting on an elastic pinned subjected to harmonic loads. The plate element model with high-order shear deformation theory and finite element algorithm is proposed in order to buckling analysis of the plate. As a result, the buckling domain is determined. Moreover, the effect of geometric parameters, elastic pins, and materials on the buckling of the plate is comprehensively investigated.
10p
dathienlang1012
03-05-2024
1
0
Download
-
In this study, a surrogate model based on artificial neural networks (ANN) will be established to predict the mechanical behaviors of the plastic Primitive TPMS reinforced beams. Finite element analysis (FEA) simulation results of different numbers of reinforcement layers and volume fractions were adopted as the model data, the robust model have been owing to a hyperparameter tuning investigation.
10p
dathienlang1012
03-05-2024
5
0
Download
-
"Numerical modeling of creep concrete beam and slab with boltzmann superposition principle" using this integral method, the creep model for Timoshenko beam and Mindlin plate will be evaluated by the Finite Element Method (FEM) combined Prony's series interpolation through MATLAB program. The creep datas used for Prony's series interpolation are based on international standards. These results obtained by FEM will be compared with available referred results and the results of the analytical method.
9p
dathienlang1012
03-05-2024
1
0
Download
-
In the paper "Finite element analysis for the composite sandwich plate using the homogenization method", we propose a homogeneous model for the composite sandwich plate. Accordingly, the 3D plate model will be replaced by a 2D homogeneous panel. Analytical calculations were performed for both models. The proposed model is confirmed by comparing the results obtained with the 3D plate model. The findings of this research will help us continue to build and finalize a homogenous model for a variety of structures.
7p
dathienlang1012
03-05-2024
1
0
Download
-
The paper "Dynamic response analysis of nanobeams resting on elastic foundations" uses the finite element method to study the dynamic response of nanobeams resting on an elastic foundation, taking into account the flexoelectricity effect. Timoshenko's first-order shear deformation theory is used to derive the formulations of the beam's forced vibration equation. The proposed theory and mechanical model are verified by comparing the numerical results of this work with those of the published data.
8p
dathienlang1012
03-05-2024
3
0
Download
-
The paper "The behavior analysis of bolted end-plate connections under static load by using finite element method" investigates the mechanical behavior of bolted end-plate beam-to- column connections with changes of thin of end-plate and size of bolts under bending moment. The finite element models are generated in ANSYS software, in specially all of meshes are hexahedral meshes as well as be continuous at welding. The results obtained from this study are validated based on three factors: loading capacity, moment resistance and joint rotation.
9p
dathienlang1012
03-05-2024
2
0
Download
-
The paper "Nonlinear finite element approach for contact problems in hyper-elastic models" considers the contact problems between hyper-elastic bodies by using finite element analysis (FEA). In this study, high-order elements is used with its advantages such as less element usage, more accurate results and geometrical flexibility... The contribution of this paper is development of programs that can calculate and simulate the specific contact problem between hyper-elastic bodies.
10p
dathienlang1012
03-05-2024
1
0
Download
-
The developed program has been successfully implemented to model and simulate the forming process, considering various aspects of the problem. The results of the solutions have been compared and evaluated, leading to important conclusions. The research also outlines future developments in this field. It is hoped that the results and understanding of this research will contribute to the field of computational mechanics and inspire further research.
9p
dianmotminh02
03-05-2024
3
1
Download
-
This paper presents a developed three-dimensional (3D) finite element model (FEM) of flexural and shear strengthening of reinforced concrete (RC) T-beams using a CFRP (Carbon Fiber-Reinforced Polymer) system combined by near-surface mounted (NSM) strips and U-wraps subjected by asymmetric loading. The 3D FEM was verified by experimental results.
18p
viohoyo
25-04-2024
4
2
Download
-
The current paper presents an overview of the current literature addressing the development of cabinet modeling. The results are expected to serve as a general reference and starting point to new researchers.
9p
vibego
02-02-2024
5
4
Download
-
This paper presents some results on the linear stability research of Stiffened Functionally Graded Carbon NanoTube-Reinforced Composite (SFG-CNTRC) plates under static in-plane loads by the Finite Element Method (FEM) and a new four-variable refined plate theory.
19p
vijeff
30-11-2023
6
3
Download
-
This enables the use of straightforward methods for isogeometric analysis in conventional finite element systems. A SOCP problem is created from the limit analysis problem, which may then be solved using Mosek optimization software. The numerical results indicate the correctness and effectiveness of the current technique by contrasting it with other approaches mentioned in the literature.
8p
vijeff
27-11-2023
4
4
Download
-
The paper is focused on analyzing the stress and deformation of the breech block before and after repair using the finite element method (FEM) approach. Besides, the results of the FEM are compared with the analytical method approach.
11p
viengels
25-08-2023
4
2
Download
-
Truss analysis has been well investigated by researchers and engineers with a large number of structural analysis software that can quickly and reliably provide analysis results. However, these methods require either expensive commercial software or self-developed in-house codes based on structural expertise along with advanced programming skills.
11p
viberkshire
09-08-2023
6
3
Download
-
This paper presents the finite element algorithm and results on dynamic response of cracked plate structure on elastic foundation subjected to moving oscillator with a constant velocity and any motion orbit. The response to a single moving oscillator is first investigated and then the effects of crack, velocity, elastic foundation stiffness, and stiffness of the spring of moving oscillator are studied.
7p
viannee
04-08-2023
4
3
Download
-
In paper "h-adaptive refinement strategies for triangular finite element meshes", we present two different approaches to h-adaptively refine triangular finite element messes. These two strategies are designed to keep the shape regularity of the meshes almost the same and to preserve the sparsity pattern of the resulting system of equations.
8p
nhanchienthien
25-07-2023
5
3
Download
-
The article presents the element model, finite element algorithm, and buckling analysis results of reinforced composite plates subjected to dynamic loads in order to determine the buckling domain.
15p
viwolverine
11-07-2023
3
2
Download
-
Computer applications modeling finite element universe bus seats are technical topics. Then, skeletal model starting stiffness was analyzed using simulation to meet the European tilt safety requirement ECE R66. As a result, the skeleton's initial volume and hardness are higher. Reduce the volume of the passenger car frame by performing a thickness reduction in the conventional manner until skeletal deformation reaches a safe space.
12p
vifalcon
16-05-2023
2
2
Download
-
This paper provides the comparison between the numerical results using ABAQUS and the experimental results from four specimens of new exterior RCS hybrid joint. Four full scale exterior hybrid joints were prepared and tested at Structures Laboratory of the INSA de Rennes.
7p
vifalcon
16-05-2023
8
4
Download
-
This paper documents the methodology that was used to develop static p-y curves from experimental measurement results for onshore long flexible drilled shaft, not for the case of cyclic loading or for short rigid pile or for offshore conditions.
7p
vifalcon
16-05-2023
3
3
Download