Glassy carbon electrode
-
Our current research focuses on developing an efficient electrochemical Dopamine sensor for diagnosing neurological disorders related to abnormal Dopamine levels. We utilized a Ga2O3-doped ZnO decorated SWCNT (Ga2O3⋅ZnO@SWCNT) nanocomposite to modify a glassy carbon electrode.
10p visergeyne 18-06-2024 0 0 Download
-
This work aims to investigate the mechanism of Pd nucleation and growth onto glassy carbon electrode from ChCl/urea/palladium mixture at room temperature using cyclic voltammetry (CV) and chronoamperometry (CA) techniques. Furthermore, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to examine the crystalline structure, morphology and compositions of deposited Pd samples.
14p viambani 18-06-2024 2 1 Download
-
Electrochemical determination of salbutamol in aqueous solutions with UiO-66/rGO-modified electrodes
The synthesis of the UiO-66/rGO material involved combining UiO-66 with reduced graphene oxide (rGO). This resulting composite found application in the electrochemical determination of salbutamol (SAL) through modification of a glassy-carbon electrode (GCE) with UiO-66/rGO. Differential pulse voltammetry served as the chosen technique, offering a wide linear range spanning 1–160 μM and demonstrating a low limit of detection at 0.84 μM
11p dianmotminh02 03-05-2024 2 1 Download
-
A simple and environment-friendly electrochemical method using activated glassy carbon electrodes (aGCE) for monitoring the residues of tetracycline in pork samples was developed. A two-step pretreatment procedure was established for activating the glassy carbon electrode surface, including mechanical polishing and electrochemical pretreatment. In the supporting electrolyte solution of 0.2 M sodium sulfate (at pH 2.5), the electrochemical response of TC was characterized by two irreversible oxidation peaks at +0.95 V and +1.05 V vs. saturated calomel electrode. T
9p dianmotminh02 03-05-2024 3 1 Download
-
In this work, the electrochemical behavior of lead has been investigated with sensitive, fast and simple different pulse anodic stripping voltammetry (DPASV) method. This preliminary work is an initial step toward the fabricating one type of electrochemical sensors used for sensitive determination of Pb (II) at trace concentration.
8p vibego 02-02-2024 3 1 Download
-
In this work, molybdenum disulfide (MoS2) nanorods (NRs) were prepared by a simple hydrothermal method. A sensitive electrochemical glucose biosensor was developed based on the immobilization of glucose oxidase (GOx) on MoS2 NRs modified glassy carbon electrode (GCE).
12p viberkshire 09-08-2023 8 4 Download
-
In the present work, tungsten disulfide was synthesised and characterised by using X-ray diffraction and scanning electron microscopy. This material was employed to modify a glassy-carbon electrode to analyse clenbuterol.
8p vispiderman 15-06-2023 3 2 Download
-
An easy-to-make new working electrode, an ex-in-situ AuF/GCE, was developed for trace As(III) detection. A gold film electrode prepared ex-situ was re-plated in-situ during each arsenic deposition step by adding Au(III) into the analyte solution.
7p vispiderman 15-06-2023 5 2 Download
-
This paper presents a methodology for studying nucleation and growth mechanisms of metals onto a glassy carbon electrode in a deep eutectic solvent (DES), a mixture of choline chloride and urea at a molar ratio of 1:2. Characteristics and composition of Co(II) complexes formed with the DES were evaluated by means of UV-vis measurements, which confirmed the good stability of these species at room temperature.
12p vidudley 20-02-2023 4 2 Download
-
This work describes the electrochemical investigation of a promising antiviral agent, favipiravir (FAV) utilizing a nonmodified glassy carbon (GC) electrode, along with a unique voltammetric approach that can determine FAV with a good degree of accuracy, speed, and cost-effectiveness. Using cyclic voltammetry, the compound demonstrated a single well-defined and an irreversible oxidation peak at approximately +1.12 V (vs. Ag/AgCl) in Britton–Robinson (BR) buffer at pH 10.0.
12p lyhuyenthu 31-01-2023 5 2 Download
-
A glassy carbon electrode, modified with gold nanoparticles/over-oxidized poly-eriochrome black T film, was fabricated for sensitive determination of As(III) by stripping voltammetry in an acidic medium. The electrode surface properties were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS).
15p lyhuyenthu 31-01-2023 7 1 Download
-
A simple approach to constructing a double-layer voltammetric sensor is described. The poly(malachite green) (PMG) and multiwalled carbon nanotubes (MWCNTs) were coimmobilized at the surface of the glassy carbon electrode (GCE) for fabrication of PMG/MWCNT/GCE. The modified electrode was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), differential pulse voltammetry (DPV), and chronoamperometric techniques.
15p langthannam 29-12-2021 9 0 Download
-
The electrochemical oxidation of 2,6-diaminopurine (2,6-DAP) was studied in pH 7.4 phosphate buffer solution on multiwall carbon nanotube modified glassy carbon electrode (MWCNT/GCE) over a temperature range of 20 to 50 ◦ C using cyclic voltammetry. 2,6-DAP oxidation on MWCNT/GCE showed a well-defined and irreversible oxidation peak at about 0.72 V vs. Ag/AgCl at pH 7.4. The oxidation potential of 2,6-DAP linearly varied with pH over the range of 3.0 to 10.0 with a slope of –0.0547 V/pH, implying that 2 protons were accompanied by 2 electrons transferred in the electrochemical reaction.
10p langthannam 29-12-2021 9 0 Download
-
A simple and sensitive modified electrode was fabricated with graphene via the drop-casting method and applied for the electrochemical detection of Sudan IV. Cyclic voltammetry (CV) was used to investigate the electrochemical behaviors of Sudan IV in phosphate buffer solution (PBS). The experimental conditions such as determining medium, scan rate, and accumulation time were optimized for the determination of Sudan IV.
7p langthannam 29-12-2021 12 0 Download
-
Methyl 4-((9H-(carbazole-9-carbanothioylthio) benzoate (MCzCTB) was chemically synthesized and characterized by FTIR, 1H NMR, and 13C NMR. A novel synthesized monomer was electropolymerized on a glassy carbon electrode (GCE) in various initial molar concentrations of [MCzCTB] 0 = 1,3,5, and 10mM in 0.1M NaClO4/CH3CN and 1M H2SO4. P(MCzCTB)/GCE was characterized by cyclic voltammetry, Fourier transform infrared-attenuated transmittance reflectance, scanning electron microscopy-energy dispersive X-ray, and electrochemical impedance spectroscopy.
12p langthannam 29-12-2021 11 0 Download
-
This paper presents a comparative study of nanomaterial modified glassy carbon paste electrodes (GCPEs) used as bioanodes in enzymatic biofuel cells. The developed bioanode electrodes were obtained by modification of composite GCPEs with glucose oxidase (GOx) and different nanomaterials like manganese(IV) oxide nanoparticle (MnO2 np) and aluminum titanate (Al2O3–TiO2) bimetallic nanostructure. These nanostructures were utilized in a GCPEbased enzymatic bioanode construction for the first time.
8p langthannam 29-12-2021 8 0 Download
-
In this study, we demonstrate a facile approach for the synthesis of strontium tungstate (G-SrWO4) using Pomelo leaf extract via the sonochemical method. The electrocatalytic performance of G-SrWO4 solubilized Nafion (Nf) (G-SrWO4/Nf) modified GC electrode was evaluated for uric acid (UA) detection.
11p meyerowitz 25-12-2021 9 0 Download
-
Cyclic voltammetry (CV) was performed on tamoxifen (tam) using different electrodes and in various acidic electrolytes containing 10% v v−1 methanol (MeOH). Tam oxidation was found to be most favorable using 0.1 mol L−1 H2SO4. To investigate the mechanism, we performed chronoamperometry, CV at different scan rates, differential pulse anodic voltammetry (DPAV), and electrochemical impedance spectroscopy on tam-covered glassy carbon electrodes (GCEs). The electrode area, diffusion coefficient, and surface concentration (Γ) of tam were calculated to be 0.062 cm2, 3.65 × 10−6 cm2 s−1 , and 3.
19p tudichquannguyet 29-11-2021 9 0 Download
-
In this work, a very simple, rapid, cheap, sensitive, and selective polymer film-modified electrode for vanillin determination in commercial food products was developed via electrochemical polymerization and overoxidation of pyrrole. The formation of both poly(pyrrole) and overoxidized poly(pyrrole) films on a glassy carbon electrode surface was characterized by electrochemical impedance spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. Under optimized conditions, the calibration graph comprises two linear segments of 0.032–1.500 µmol L−1 and 3.00–150.
15p tudichquannguyet 29-11-2021 11 1 Download
-
Enhanced electrocatalytic reduction of oxygen is achieved using Pt nanoparticle-modified copper phthalocyanine-multiwalled carbon nanotube (PtNPs/CuPc-CNT) composite film on a glassy carbon electrode (PtNPs/CuPcCNT/GCE). The PtNPs/CuPc-CNT/GCE surface is characterized by scanning electron microscopy, transmission electron microscopy, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The electrocatalytic activity of composite electrodes in the oxygen reduction reaction is investigated by cyclic voltammetry and rotating-disk electrode measurements.
16p tudichquannguyet 29-11-2021 7 1 Download