![](images/graphics/blank.gif)
Interface shear strength
-
The paper presents a series of modified direct shear tests to investigate the interface shear strength between clay and nonwoven geotextile under different normal stresses and degrees of saturation. The modified direct shear apparatus consists of a 60 mm × 60 mm square shear box assembly with a 60 mm × 60 mm acrylic block inserted in the bottom shear box. A woven geotextile layer was glued to the top of the acrylic block, while the top shear box was filled by the compacted clayey soil.
14p
chauchaungayxua12
09-07-2021
17
1
Download
-
This study aims to understand the uncertainty about the optimum or best pin position (Dp) for friction stir lap welding (FSLW) of Al-Cu. Tensile shear testing is used to determine the Mechanical strength of FSL welds under static loading.
12p
tohitohi
19-05-2020
7
1
Download
-
The effectiveness of concrete structures reinforced by the high strength steel wire mesh-polymer mortar depends on the bond-slip behavior of the interface between the polymer modified cement mortar layer (referred as mortar layer) and the concrete. The areas of the mortar layer tested in the previous studies are generally very small and the obtained conclusions are with limited applications. In this study, the experimental approach was used to analyze the slip behavior of the interface between the concrete block and a larger scale mortar layer.
13p
christian2605
11-10-2019
12
2
Download
-
Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành hóa học dành cho các bạn yêu hóa học tham khảo đề tài: Friction and Shear Strength at the Nanowire–Substrate Interfaces
5p
dauphong17
21-02-2012
36
2
Download