Mechanical characterisation

The aim of this Masters of Engineering (MEng) - Aerospace thesis was to investigate the durability of Piezoelectric Wafer Active Sensors (PWAS) for the health monitoring of composite structures. One significant challenge faced by the aviation industry is the cost and time associated with maintaining aircrafts, in particular, aging airliners. Structural Health Monitoring (SHM) is a possible approach to reduce the high cost of inspection and maintenance.

164p runthenight04 02-02-2023 11 2   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. Additively manufactured TPU mould is developed to cast complex concrete structures. A planar topologically optimized cantilever and a free-form 3D column are cast using the proposed TPU mould. Good surface quality is obtained for the cast concrete elements, and the moulds can be reused many times after cleaning.

98p runthenight04 02-02-2023 8 4   Download

The nasal route for drug administration has the potential for local and systemic delivery of a wide variety of therapeutics. Nasal spray drug delivery has the potential to administer drugs to the bloodstream, avoiding the use of painful needles. While there is great potential, studies in the area are limited and somewhat conflicting. This study aimed to support the improvement of nasal drug delivery through experimental work on a model nasal cavity and through experimental characterisation of nasal spray behaviour. Four different brands of nasal spray were investigated.

91p runthenight04 02-02-2023 7 3   Download

The aim of this project was to design, fabricate and characterise multifunctional structural composites incorporating phase change materials for thermal management applications. The specific research objectives to achieve this goal were formulated as follows: Investigate effective methods to integrate microencapsulated PCMs into glass fibrereinforced epoxy composites; Evaluate the mechanical properties of micro-PCMs enhanced FRP composites and investigate associated failure mechanisms; Study the thermal management effectiveness of micro-PCMs enhanced FRP composites.

125p runthenight04 02-02-2023 9 3   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. The findings of this thesis will provide clear guidelines for the selection of processing parameters for additively manufactured TPU parts and the method of casting complicated concrete structures with additively manufactured TPU mould.

98p runordie3 06-07-2022 13 3   Download

Vietnam Oil and Gas Journal Vol 06/2019 with the situation of Vietnam Oil and Gas industry, domestic and international cooperation of the petroleum industry in June 2019. With posts: characterisation of acid treatment for damaged zone in tractured granitic basement of Bach Ho field; Oligocene combination stratigraphic traps and their reservoir quality in Cuu Long basin, offshore Vietnam; corrosion threats and strategy to secure Mechanical integrity of Dung Quat refinery...

0p lequangvinh1608 09-08-2019 48 0   Download

Is a branch of polymer science dealing with analysis and characterisation of polymers. üThe complication of macromolecular chains, the dispersion in molecular weight, tacticity, crystallinity, orientation, composition of polymers etc. and complex morphological systems ⇒ analysis of polymer ≠ the small organic materials ⇒ Focus on viscoelastic properties, dynamic mechanical testing.

114p buitiendung87 06-01-2011 339 154   Download