Nanocomposites synthesized
-
In this study, we present an innovation method to synthesize ZnO nanoparticles colloidal solution by Zn2+ precipitation, and using COS and COS-I2 as a stabilizer agent to replace high molecular weight chitosan in previous studies. [17,18,24] It was favorable due to COS with small Mw did not precipitate at alkaline pH. Thus, ZnO/COS and ZnO/COS-I2 composite nanomaterials were prepared in this work will be oriented to use as antimicrobial agrochemicals, and post-harvest preservation.
8p dianmotminh02 03-05-2024 3 2 Download
-
In this study we present a method to synthesize new heterogenous photocatalytic materials based on ternary nanocomposite ZnO/MgO/TiO2 to activate persulphate (K2S2O8) for degradation of methylen blue dye (MB) and pesticide acetamiprid that used in aquaculture and agricultural cultivation under simulated sunlight.
8p vicwell 06-03-2024 8 2 Download
-
In the present study, CoFe2 O4 /reduced graphene oxide (CoFe2 O4 /rGO) has been synthesized. The morphology and structure of nanocomposites CoFe2 O4 /rGO were characterized by X-ray diffraction (XRD), Energy Dispersive X-Ray spectrometer (EDX), scanning electron microscopy (SEM), and Fourier Transform infrared spectroscopy (FTIR).
8p vigojek 02-02-2024 4 1 Download
-
A magnetic multi-wall carbon nanotube (MCNTs) nanocomposite was synthesized and was used as an adsorbent for removal of oil from aqueous solutions. The MCNTs nanocomposite was composed of commercial multi-wall carbon nanotubes and iron oxide nanoparticles.
6p vimarillynhewson 02-01-2024 2 0 Download
-
In this work, ZnFe2O4 nanoparticles were synthesized by hydrothermal method while the hummer method was used to synthesize GO nanosheet. GO/ZnFe2O4 nanocomposites (GO/ZFO) were prepared by mixing GO with ZnFe2O4 in mass ratio of 1:99, respectively.
8p visharma 20-10-2023 4 4 Download
-
In this study, rGO/NiCo2S4 composite materials were successfully synthesized by hydrothermal method. The properties of obtained materials were systematically characterized using XRD, SEM, EDX, and Raman techniques. The electrochemical performance of the materials was evaluated through cyclic voltammetry (CV) and Galvanostatic charge-discharge (GCD) measurements.
14p viengels 25-08-2023 7 3 Download
-
In this research, the bio-composites based on epoxy resin filled with nano-silica and vinyl copolymer were fabricated using diethylene triamine as a curing agent and casting method. The vinyl copolymer was synthesized from Hydroxyethyl Acrylate and Methacrylic acid using ammonium persulfate as an initiator.
11p viengels 25-08-2023 3 2 Download
-
For the first time, reduced graphene oxide (rGO) and barium ferrite (BFO) nanocomposites were synthesized by using an eco-friendly green combustion method (sugar and Leucas aspera (Thumbe) leaves extract as reducing agent).
10p viberbers 09-08-2023 7 3 Download
-
TiO2/CuSe nanocomposites were synthesized using a straightforward wet chemical without any sophisticated template. A variety of characterization techniques, including XRD, Raman spectra, UV-Vis spectroscopy, X-ray photoelectron spectroscopy (XPS), and SEM/EDS analysis were used to elucidate the structure, morphology, and optical properties of the TiO2/CuSe nanocomposite.
11p viberbers 09-08-2023 3 3 Download
-
Polythiophene (PTh) and polythiophene/molybdenum oxide nanocomposites (PTh/MoO3) were synthesized by an in-situ chemical oxidative method. The successful synthesis of both the materials was confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM).
10p viberbers 09-08-2023 4 3 Download
-
In this work, the influence of Graphene oxide (GO) on the sensing performance of Polyaniline (PANI) toward NH3 and CO gases at room temperature (RT) was comprehensively studied. The PANI/GO nanocomposite was synthesized by the “in-situ chemical oxidation polymerization” route in the presence of GO.
8p viberbers 09-08-2023 6 3 Download
-
The article reports upon the preparation and characterization of organo-functionalized NieAl layered double hydroxide (LDH)-polystyrene (PS) nanocomposites. Initially, pristine NieAl LDH was synthesized via the co-precipitation technique and was subsequently treated using sodium dodecyl sulfate to obtain organo-functionalized NieAl LDH (ONieAl LDH).
10p viberbers 09-08-2023 5 3 Download
-
We have effectively synthesized ZnS, FeSe2, and their nanocomposite using a straightforward and affordable solvothermal process. We also investigated for the first time their ideal electrochemical performance for supercapacitors.
10p viberbers 09-08-2023 8 3 Download
-
The clad-modified multimode plastic optical fiber (POF) was developed using pristine BiMnO3 (BMO) and BMO/rGO as a sensor material. The BMO and BMO/rGO were synthesized using the hydrothermal method. The structural, morphological, optical, and dielectric properties were studied using X-ray diffraction (XRD), Scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FT-IR), UVevis spectrophotometer, and LCR meter. T
7p viberbers 09-08-2023 2 2 Download
-
CeO2-SnO2 nanocomposite, a sensing material, was successfully synthesized by a hydrothermal method. The structural, optical and morphological properties of as-prepared CeO2-SnO2 nanocomposites were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy and field emission scanning electron microscopy (FESEM).
6p viberbers 09-08-2023 5 3 Download
-
A novel graphene oxide/copper oxide (GO@CuO) nanocomposite (NCS) was successfully synthesized via hydrothermal method. The NCS was characterized by XRD, SEM, TEM and BET surface area analysis. The NCS modified electrode was applied to detect the dopamine (DA) and paracetamol.
8p viberbers 09-08-2023 3 3 Download
-
CeO2/SnO2 nanocomposites with different dimensional nanostructures were synthesized by a wet chemical method, using various surfactants such as SDS, CTAB and Triton X-100. The prepared CeO2/SnO2 samples were analyzed by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Transmission electron microscopy (TEM), UV-Diffuse Reflectance Spectroscopy (UV-DRS), and Photoluminescence (PL) spectroscopy.
7p viberbers 09-08-2023 4 3 Download
-
A polyaniline (PANi)-carbon quantum dots (CQDs) nanocomposite material with CQDs made from a PEG (polyethylene glycol and NaOH) source was synthesized. This unique synthesis technique was developed to overcome the setbacks of the PEG method by using UG (urea and glycine). PANi was synthesized by chemical oxidation in the presence of CQDs, which were prepared according to the two above-mentioned methods.
10p viberbers 09-08-2023 9 5 Download
-
The novel MnWO4/BiOI nanocomposite materials were successfully synthesized by a precipitation deposition method. The as-prepared photocatalyst was characterized by XRD, SEM, EDAX, UV-DRS, FT-IR, TEM and BET techniques. The as-prepared MnWO4/BiOI nanocomposites were further utilized to study the degradation of the Celestin blue aqueous solution under visible-light irradiation.
11p viberbers 09-08-2023 5 3 Download
-
The surface modification of synthesized nano-BaTiO3 particles was carried out using g-aminopropyl trimethoxy silane (g-APS) in an ethanol/water solution. The modified particles were characterized by FTIR, TGA, surface charge analysis, and by dielectric constant measurement.
8p viberbers 09-08-2023 3 3 Download