Node Address

Có ba cách để xác định máy tính trong môi trường mạng TCP/IP, đó là điạ chỉ vật lý, địa chỉ IP và tên miền. Trong bài giảng số 5 này sẽ tập trung tìm hiểu về địa chỉ IP và Subnet Mask. Mời các bạn cùng tham khảo.

35p namthangtinhlang_02 05-11-2015 231 41   Download

Multiprotocol Label Switching Multiprotocol Label Switching (MPLS) is a standards-approved technology for speeding up network traffic flow and making it easier to manage. MPLS involves setting up a specific path for a given sequence of packets, identified by a label put in each packet, thus saving the time needed for a router to look up the address to the next node to forward the packet to. MPLS is called multiprotocol because it works with the Internet Protocol (IP), Asynchronous Transport Mode (ATM), and frame relay network protocols....

78p greenwind007 13-09-2012 154 44   Download

What is an advantage of the NAT-PT technique for transitioning between IPv4 and IPv6? All mappings are static. Globally routable IPv4 addressing is not required. DNS is not required. No configuration is required on end nodes. How do IPv6 enabled routers handle packet fragmentation? IPv6 routers do not perform packet fragmentation. OSPFv3 has a mechanism for determining the optimal packet size and dynamically adjusting the packet size. IPv6 routers do not perform packet fragmentation. CDP is used to discover the correct packet size for any given traffic flow....

10p danhson1409 26-12-2010 144 13   Download

The switch then forwards data from one network node to another. On basic switches such as the type used in homes or small offices, the switch usually reads the MAC address of the destination node in each ethernet frame and sends the frame directly to that device. Most switches maintain a switching table, a record of the MAC addresses and network port numbers used by each device on the network.

10p vongsuiphat 05-01-2010 85 10   Download