![](images/graphics/blank.gif)
Numerical and experimental
-
In this thesis, a numerical model with detailed reaction mechanism which is tailored for studying the behaviour of combustion of natural gas has been introduced and validated with available experimental data. The numerical model attempts to comprehensively simulate the physical conditions (temperature and pressure), equivalent ratio, and fuel dilution and strain rate effect in the laminar flames.
158p
runthenight05
01-03-2023
22
3
Download
-
This study focuses on experimental testing and subsequent numerical analysis of impacted and pre-loaded composite coupons and bonded composite scarf joints under varying impact conditions. A methodology will be developed for the numerical modelling of preloaded impact tests to enable capture of critical failure modes and ultimate failure. The main aim is to validate a modelling strategy that will provide accurate failure characterisation of the tested joints using numerical analysis.
185p
runthenight05
01-03-2023
19
3
Download
-
This thesis investigates the SPH capability available in the commercial Finite Element (FE) code LS-DYNA®, for water impact problems. Experiments have been conducted on rigid wedges impacting water, which were then simulated with the SPH method. Although certain limitations were experienced with the experimental results, a positive correlation was observed with the numerical technique, thus establishing SPH as a promising method for crashworthiness design.
176p
runthenight07
01-03-2023
14
3
Download
-
The primary goal of this research is accomplishing the BUUAS that can realize functions in the mission profile. In order to achieve this, the project starts with developing elemental aspects of the BUUAS. The configuration and propulsion system are two basic elements that the BUUAS must have to realize successfully operation. Besides, the necessary transition process between water and air must be investigated and carried by a conceived system.
187p
runthenight04
02-02-2023
10
2
Download
-
The nasal route for drug administration has the potential for local and systemic delivery of a wide variety of therapeutics. Nasal spray drug delivery has the potential to administer drugs to the bloodstream, avoiding the use of painful needles. While there is great potential, studies in the area are limited and somewhat conflicting. This study aimed to support the improvement of nasal drug delivery through experimental work on a model nasal cavity and through experimental characterisation of nasal spray behaviour. Four different brands of nasal spray were investigated.
91p
runthenight04
02-02-2023
13
3
Download
-
The soil-structure interaction problems under seismic loading are researched by numerical and experimental methods. In numerical study, the complication of soil-foundation interaction is simulated by a proposal macro-element.
27p
hobbsandshaw
09-06-2021
34
4
Download
-
Equivalent inclusion approach is then developed to account for possible diversions, such as non-idealistic geometric forms of the inhomogeneities, imperfect matrix-inclusion contacts, filler dispersions, and when the particular values of the fillers’ properties are unspecified, using available numerical or experimental reference conductivity data for particular composites.
28p
capheviahe27
23-02-2021
28
4
Download
-
The limitation of land in urban area leads to the existence of land slowly omitted and changed to be functioned room. The additional room itself will be reducing thermal comfort in the house.
13p
lucastanguyen
01-06-2020
13
2
Download
-
In this research, an investigation was carried out through experimentation and numerical modeling to evaluate the cracking pressure induced due to corrosion of reinforcement for different cover thicknesses, grades of concrete and bar locations.
10p
tohitohi
19-05-2020
26
1
Download
-
In this paper, the first and second stage compressor blades of a gas turbine were studied by the experimental and numerical modal analyses.
14p
tohitohi
19-05-2020
15
2
Download
-
This work investigated and predicted the fatigue life durability of Austenitic Stainless Steel 316L at room temperature due to its importance in plant industries worldwide. Modelling and simulations were performed to clarify the fracture as well as stress distribution using integrated mechanism.
10p
tohitohi
19-05-2020
18
1
Download
-
The present work summarizes some recent experimental, theoretical and numerical results on brittle fracture of isostatic polycrystalline graphite. The analyses have been carried out on V-notched samples under mixed mode (I+II), torsion and compression loading, considering various combinations of the notch tip radius, opening angle and notch tilt angle.
20p
tohitohi
19-05-2020
21
1
Download
-
In the present study, a new approach “damaged zone simulation (DZS)” is proposed based on the experimental and numerical data, for investigating the orthotropic damaged zone properties. Comparison with existing analytical data shows the capabilities of the presented approach.
10p
tohitohi
19-05-2020
17
3
Download
-
In this paper, numerical and experimental approaches to this phenomenon on were conducted. Numerical method comprised of couple heat-displacement. In it, heat flux distribution of laser beam was applied on the steel layer in Gaussian form and by using subroutine code writing procedure.
10p
tohitohi
19-05-2020
12
1
Download
-
An emerging body of evidence supports a key role for the endocannabinoid system in numerous physiological and pathological mechanisms of the cen-tral nervous system. In the recent past, many experimental studies have examined the putative protective or toxic effects of drugs interacting with cannabinoid receptors or have measured the brain levels of endocannabi-noids inin vitro and in vivo models of cerebral ischemia.
11p
vinaphone15
27-02-2013
40
3
Download