Operational conditions

In this study, MCS is applied to compute the reliability of the nodes and the network under uncertain demand and roughness, and to determine how reliability is distributed among the various nodes of WDN, as well as assessing the reliability of the network as a series or parallel system. The effect of the resilience index on the nodal and network reliability is also assessed.

199p runthenight05 01-03-2023 9 3   Download

This research is built upon the determination of the Eigenpairs of one and two dimensional positive differential operators with periodic boundary conditions. The Schrödinger equation was solved for positive operators in both one and two dimensions. Fourier series were used to express the derivatives as the summation of Fourier terms. This led to a novel approach for the calculation of the eigenmodels of a perturbed potential well. The perturbation can be done via an electric field applied to the potential well.

88p runthenight07 01-03-2023 6 3   Download

Objectives of this study: To determine the optimum solid concentration that can be used in mixing vessel under baffled and unbaffled conditions using various impeller types; To study the effects of design and operating conditions on the suspension performance; To improve the minerals treatment processes while maintaining as much as possible the current design to minimize the operating costs.

125p runthenight07 01-03-2023 7 3   Download

The primary objective of this research is to study the effect of solids concentration and active particle mass fraction on mass transfer in a solid-liquid (dissolution) system and determine the optimum solids volume fraction and operating conditions that will help to achieve higher mass transfer efficiency at higher solids concentration than hitherto used (> 5% v/v).

91p runthenight07 01-03-2023 7 3   Download

In this thesis, focus on the wireless links between devices equipped by deployed operating personnel and intermediary access point infrastructure. We use multi-radio (MR) platforms, wireless devices with multiple and diverse transceiver technologies, to produce robust and reliable links through adaptive control of available transceivers. Primarily, we study the application of intelligent control techniques, namely reinforcement learning (RL), for adaptive control over diverse transceivers to achieve the desired robustness and reliability under dynamic environmental conditions.

185p runthenight04 02-02-2023 7 2   Download

This thesis presents an evaluation of the mapping performance of a variety of SLAM algorithms that are freely available in the Robot Operating System (ROS), in conjunction with ranging data from various ranging sensors suitable for use onboard small UAS. To compare the quality of the generated maps, an existing metric was initially employed, however deficiencies noted in this metric led to the development of two new metrics. A discussion of both the existing and new map quality metrics, and the advantages and disadvantages of each, is presented as part of this thesis.

99p runthenight04 02-02-2023 10 2   Download

The main objective of this research "Dynamic modelling of an aggregated solar-PV system for power system transient stability studies" is to develop an aggregated solar-PV model and critically analyse its performance under various operating conditions and faults.

104p runthenight04 02-02-2023 6 2   Download

The objectives of the study are: to extend the literature in several ways. First, the relationship between strategictype and organisational capabilities has been predominately investigated in the context of the private sector, not the public sector; To provide evidence about the comparative impacts of two contemporary control devices adapted by management of GBEs, as organisations that operated in a nexus between private sector market conditions and public sector ownership and oversight conditions; To provide evidence about the mix of congruency factors (i.e.

261p runthenight04 02-02-2023 8 2   Download

To study the scientific basis to build the optimal calculation model of electricity sales for the system of staged reservoirs under competitive power generation conditions in order to provide operational instructions in combination with the coordination chart deliver the full annual output contract and drive to the largest revenue.

27p hobbsandshaw 09-06-2021 16 4   Download

Objective of the research: The research objective of the thesis is to establish some limit theorems regarding the forms of law of large numbers for sequences and arrays of measurable operators under different conditions.

22p prisonbreak123 21-05-2021 28 2   Download

The thesis proposes a simple but very effective method to study the unique solvability and an iterative method for solving five boundary value problems for nonlinear fourth order ordinary differential equations with different types of boundary conditions and two boundary value problems for a biharmonic equation and a biharmonic equation of Kirchhoff type by using the reduction of these problems to the operator equations for the function to be sought or an intermediate function.

27p larachdumlanat129 20-01-2021 29 3   Download

Proposing solutions to enhance the management of operational riskin accordance with VietinBank's operations in the conditions of implementing Basel II standards in the coming time.

24p mmlemmlem_124 22-12-2020 25 2   Download

General objective: Improvement of the ICS at Agribank according to COSO international standards.

27p caygaocaolon7 17-09-2020 52 2   Download

The main content of this study considers the impact of monetary policy transmission through credit channels under the influence of competitiveness in Vietnamese commercial banks, thereby making policy suggestions for operating monetary policy through credit channels in competitive conditions. However, in order to fill the research gaps, the author also focuses on comparing this effect through different methods of measuring competitiveness.

35p cothumenhmong6 17-07-2020 40 3   Download

In this paper, we present a numerical analysis of the effect of different heat transfer correlations on the prediction of the cladding wall temperature in a supercritical water reactor at nominal operating conditions. The neutronics process with temperature feedback effects, the heat transfer in the fuel rod, and the thermal-hydraulics in the core were simulated with a three-pass core design.

11p christabelhuynh 30-05-2020 22 1   Download

The contribution of the thermal scattering law of hydrogen in light water to isothermal temperature reactivity coefficients for UOX and MOX lattices was studied in the frame of the MISTRAL critical experiments carried out in the zero power reactor EOLE of CEA Cadarache (France).

15p christabelhuynh 30-05-2020 9 1   Download

In this work, the equipment was used to investigate the distribution of lithium (7Li) and boron (11B) in the outer oxide at the bow contact area. Depth profiling in the clad oxide at the opposite side of the rod to the point of contact, which is considered to have experienced normal operating conditions and which has a typical oxide thickness, evidenced levels of ∼10–20 ppm 7Li and a 11B content reaching hundreds of ppm in the outer parts of the oxide, largely in agreement with the expected range of Li and B clad oxide concentrations from previous studies.

9p christabelhuynh 30-05-2020 7 1   Download

This work shows a free-body model for tolerance analysis, that uses the force free-body diagrams and the functional equations’ sensitivities, by simulating the geometrical tolerances together with the dimensional ones.

12p tohitohi 19-05-2020 9 2   Download

Objective of the thesis For the purpose of building a model of electrical generator for sea wave energy, the device operates efficient and in suitable to Vietnam's sea condition; determining the optimal damping coefficient of the generating motor, model parameters to received the maximum output power; design, fabrication of the electrical generator with the output voltages are 12 VDC, 220 VAC frequency 50 Hz and pure sine wave.

27p xacxuoc4321 08-07-2019 45 6   Download

This paper addresses a vexing problem that has plagued machine reliability professionals.for decades. Despite the best efforts to precisely align rotating machinery shafts,.dynamic movement (mostly manifested by the thermal growth of the machine casings).has resulted in machines operating at less than optimum alignment conditions.

0p anhkietvt 18-08-2017 41 3   Download