Optimization

Bài giảng Lập trình nâng cao - Chương 4: Refactoring & Optimizing (Cải tiến và tối ưu hóa). Chương này cung cấp cho sinh viên những nội dung gồm: các vấn đề tồn đọng; tiếp tục cải tiến và tối ưu hóa; kỹ thuật truyền tham số bằng giá trị, tham chiếu, tham chiếu hằng; từ khóa const;... Mời các bạn cùng tham khảo chi tiết nội dung bài giảng!

13p codabach1016 03-05-2024 9 1   Download

In line with that research trend, this paper proposes a hybrid algorithm combining particle swarm optimization with the simulated annealing technique (PSO-SA) to optimize the length of intervals to improve forecasting accuracies.

19p vimurdoch 18-09-2023 12 4   Download

Since community buildings are a large group of assets managed by local city councils, current research has the potential to identify asset management deficiencies and assist in improving an integrated management model by: Establishing deterioration trends in building components for community buildings; Validating proposed deterioration using case-study data; Developing a database of costs to facilitate optimisation of maintenance; Developing a methodology to integrate deterioration and cost to optimize maintenance requirements.

186p runthenight05 01-03-2023 6 3   Download

The objectives of the current study are to develop a methodology to estimate the optimal size of the rainwater tank at a particular location considering the local rainfall, roof area, demand for water and the reliability of supply (supply security) required; to quantify the rainwater volume that could be harvested at site using domestic rainwater tanks to minimise pressure on the potable water supply secured from traditional catchment sources until the desalination plant is commissioned in 2013; to analyse the efficacy of rainwater tanks to reduce the stormwater runoff and improve the quali...

226p runthenight05 01-03-2023 6 3   Download

The aim of this research is to produce information on decision making in relation to fertiliser use. This information can be used in the Game Theory model to calculate optimal strategies on phosphorus fertiliser application amounts for the individuals within the group. If the results indicate a benefit to the individual and the community as a whole, and are seen as practical, then on a catchment wide basis this should lead to changes in management practices that will minimise phosphorus pollution of the Hopkins River catchment’s waterways.

174p runthenight07 01-03-2023 8 4   Download

Optimum Flight Trajectories for Terrain Collision AvoidanceThe objective of this research is to introduce a new methodology that computes optimal escape trajectories within a three dimensional digital terrain. It has been established that conducting a pull up manoeuvre may not always be the best option for a pilot to salvage the aircraft in the case of an imminent collision. To prove this further, several simulations were conducted which shows that performing a lateral turn can produce safer trajectories in comparison to a vertical pull up.

155p runthenight07 01-03-2023 7 3   Download

The objectives of the present study are: Justifying the possibility of using laser cladding technology as a repair method for refurbishment of worn railway axles without jeopardizing their fatigue properties; Analysis of crack initiation and propagation in laser clad samples.

130p runthenight07 01-03-2023 6 3   Download

The main objective of this research is to optimize the design of the Tunnel kiln for efficient fuel usage. To achieve that, the temperature distribution from the simulation needs be matched with the desired Tunnel kiln curve found in industry. This objective can be achieved by CFD simulation where temperature, velocity and emission distributions inside the Tunnel kiln can be obtained. Generated temperature distribution can be matched with the industrial curve and by interpreting the curve, efficient design can be suggested.

115p runthenight07 01-03-2023 9 3   Download

Model Predictive Control (MPC) refers to a class of algorithms that optimize the future behavior of the plant subject to operational constraints. The merits of the class algorithms include its ability to handle imposed hard constraints on the system and perform on-line optimization. This thesis investigates design and implementation of continuous time model predictive control using Laguerre polynomials and extends the design approaches proposed in to include intermittent predictive control, as well as to include the case of the nonlinear predictive control.

162p runthenight07 01-03-2023 9 4   Download

This thesis is dedicated to study how the charging behaviours of plug-in hybrid vehicles affect the local distribution network. This study focuses on two issues: the power loss and charging cost optimization. The multi-objective particle swarm optimization technique is applied to achieve the optimal charging schedule, resulting in acceptable additional power loss ratio and charging cost.

89p runthenight07 01-03-2023 8 3   Download

The main focus of this thesis is on the application of a model predictive control (MPC) method to devise an ABS for a BBW vehicle. Unlike the traditional ABS control algorithms which are based on a trial and error method, the MPC based ABS algorithm aims to utilizes the behaviour of the model to optimize the wheel slip dynamics subject to system constraints. Performance of the proposed wheel slip controller is validated through Software-in-the-Loop (SiL) and Hardware-inthe-Loop (HiL) simulation.

136p runthenight07 01-03-2023 9 3   Download

The aim of the thesis "Copreneurial sustainability: optimizing structures in small and medium U.S. enterprises" is to identify structures that support long-term sustainability of the copreneurial enterprise and its subsystems. To support the aim of the thesis, the following research question was derived from the literature review: What optimizing structures are created by copreneurs to achieve sustainability of both the business and the family?

350p runthenight04 02-02-2023 6 2   Download

The broad aim of this research project is to optimize planned and emergency maintenance tasks and timings for tram tracks. Consistent with that broad aim, the following specific objectives are identified: Understand the factors affecting the degradation of tram tracks; develop a degradation prediction model for tracks as a function of the influencing factors; evaluate the time and type of maintenance required for deteriorated rail tracks.

101p runthenight04 02-02-2023 6 2   Download

This study proceeded to address the following objectives: To evaluate the effect of gas composition commonly used in modified atmosphere packaging (80% O2 and 20% CO2) on the shelf life of beef patties; to formulate an optimal solution containing natural antioxidant and antimicrobial preservatives and to study the effect of this combination and MAP on physiochemical attributes (surface colour (chroma, hue angle), metmyoglobin and oxmyoglobin contents, lipid stability) of fresh beef patties; to evaluate the effect of combined antioxidant – antimicrobial natural preservative and MAP on packag...

95p runthenight04 02-02-2023 9 2   Download

This research is to design the Indonesian LPG distribution system through Location-allocation modelling taking into account the existing facilities. Location-allocation model is developed in fixed charge capacitated location-allocation problem considering transportation and inventory decisions. Multi echelon LPG distribution system is considered to be modelled from regional warehouse to agents.

616p runthenight04 02-02-2023 8 3   Download

Several studies have been carried out by optimising only the cost. They have not considered some other risk factors such as political and economic factors in their modelling. Currently, there is no generalised model available to determine the optimal sourcing locations incorporating important factors including risks in international LNG trading. In this study, 12 risk factors were taken into consideration to evaluate the risk.

125p runthenight04 02-02-2023 6 3   Download

Bài giảng "Tính toán tiến hóa: Bài 7 - Ant Colony Optimization (ACO)" được biên soạn với các nội dung chính sau: Giải thuật toán tối ưu bầy kiến; Giải thuật toán tối ưu bầy ong; Giải thuật toán tối ưu bầy đàn; Giải quyết một bài toán bằng ACO;... Mời các bạn cùng tham khảo bài giảng!

19p kimphuong1001 11-02-2023 9 3   Download

The study "Multi-objective solar building envelope design optimization" includes four main objectives: 1 - To explore the components of a building envelope design optimization framework that would be developed for the conceptual building design phase; 2 - To establish an optimization process for different BIPV application types; 3 - To investigate the optimization algorithms and methods that could be used to optimize building envelope design for BIPV; 4 - To develop and validate an optimization framework to integrate BIPV into the building structure.

158p runthenight04 02-02-2023 5 2   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. Additively manufactured TPU mould is developed to cast complex concrete structures. A planar topologically optimized cantilever and a free-form 3D column are cast using the proposed TPU mould. Good surface quality is obtained for the cast concrete elements, and the moulds can be reused many times after cleaning.

98p runthenight04 02-02-2023 8 4   Download

This thesis contributes to a better understanding of the relationship between residential energy efficiency and health. The thesis argues that residential energy efficiency improvements are complex interventions in complex socio‐technical systems.

765p runthenight04 02-02-2023 15 5   Download