Photocatalytic material

In recent years, the understanding of processes on material surfaces has drawn considerable interest from scientists. The adsorption stage is important for further insights into surface interactions and photocatalytic reactions. In this study, we use density functional theory computations to investigate the adsorption of sulfamethoxazole (SMX) molecules on the rutile-TiO2 (001) surface (r-TiO2 ).

8p viyoko 01-10-2024 3 1   Download

In this research, we had successfully prepared a series of RF-carbon nitride composites for photocatalyst application. The modification of carbon nitride with RF resins aimed to enhance physical characteristics and photocatalytic activity toward organic pollutants, such as methylene blue. XRD, FTIR, SEM, and N2 adsorptiondesorption isotherms were used to characterize the asprepared composite materials.

10p vikwong 29-09-2024 2 1   Download

The Mn-doped MoS2 (Mn-MoS2) material is fabricated by a facile onestep calcination method. The Mn2+ content introduced into MoS2 is ranged from 1 wt% to 7 wt%. The X-ray diffraction (XRD) and scanning electron microscopy SEM results suggest that the doping of Mn2+ does not alter the crystal structure and the morphology of MoS2.

5p vikwong 29-09-2024 2 1   Download

In this study, the sol-gel method was successfully used to synthesize S-TiO2 for efficient photocatalytic degradation of Ciprofloxacin solution under visible irradiation. These synthesized materials were characterized by various analytical methods such as XRD, SEM-EDX, FT-IR, and UV diffuse reflectance spectroscopy (DRS).

6p vikwong 29-09-2024 2 1   Download

In this communication, we synthesized the composite of MoO3/TiO2 with hierarchical electronic structure via the facile impregnation combined with calcination of precursors. Beside the forming of composites, the asprepared samples were in a desire of Mo-doping into TiO2 lattice, due to the smaller radius of Mo+6 compared to Ti+4, leading to the reduction of the band gap.

7p vikwong 29-09-2024 3 1   Download

In this study, the photocatalytic degradation of rhodamine b (RhB) is investigated over metal-organic framework materials based on bismuth and trimesic acid (Bi-BTC) with different metal-to-ligand molar ratios. All obtained products are characterized by using powder X-ray diffraction, scanning electron microscopy, and UV–vis diffuse reflectance spectroscopy.

6p vikwong 29-09-2024 1 1   Download

The high durability, re-collectable and low-cost materials with tertiary (reduced graphene-TiO2-Fe3O4, denoted as GrTiFe) components for degradation of toxic organic compounds have been prepared from different precursors by coprecipitation and hydrothermal methods.

5p vikwong 29-09-2024 2 1   Download

Zeolite Socony Mobil-5 (ZSM-5) was successfully synthesized by a hydrothermal method from the silicon dioxide (SiO2) precursor prepared fro m rice husk ash. Titanium dioxide (TiO2) nanoparticles were decorated on ZSM-5 substrate by a sol-gel method. ZSM-5/TiO2 materials were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscope (TEM), and Brunauer-Emmett-Teller (BET) surface area analysis.

6p vikwong 29-09-2024 1 1   Download

In this study, the Cu-TiO2-SBA-16 photocatalytic materials were successfully prepared by direct hydrothermal synthesis method. The products were characterized by X-ray diffraction (XRD), Ultraviolet– Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), N2 adsorption–desorption isotherms, X-ray photoelectron spectroscopy (XPS) methods.

6p vikwong 29-09-2024 3 1   Download

The objective of this project was to develop \(Ti{O_2}\) based multifunctional substrates through silver decoration, while simultaneously enhancing the photocatalytic performance of \(Ti{O_2}\) in the substrate. Employing Ag nanoparticles introduced additional functionality to the system, namely surface-enhanced Raman scattering (SERS), thus enabling the detection of trace amounts of organic molecules prior to their degradation, all with the same substrate.

123p runthenight04 02-02-2023 7 2   Download

The results show that the cerium oxide spherical nanoparticles built from primary nanoparticles with the average size of ~5 nm, exhibited dispersion and uniform size and shapes with their average particle diameter of ~50 nm in size. With such a good morphology, CeO2 material possessed good catalytic activity for the decomposition of methylene blue (MB), in which the material was synthesized at a hydrothermal temperature of 80 oC (CeO2-80) for the best MB decomposition performance.

10p meyerowitz 25-12-2021 5 0   Download

The purpose of this thesis is to study and synthesize BiMO materials (M = V,Ti,Sn) by microwaveassisted chemical method, hydrothermal method, sol-gel method and evaluate their physical properties. The synthesized materials (Bi2Sn2O7 and Bi2Ti2O7) were investigated the photocatalytic activity in the decomposition of RhotaminB (RhB) under visible light.

28p thebadguys 08-06-2021 23 3   Download

The thesis focused on the synthesis of Mn, Ce, C doped ZnO nanoparticles materials and doped ZnO with multi-layered carbon nanotube nanocomposite materials and assessed their photo-oxidative potentiality through photocatalytic reactions of methylene blue (MB) decomposition in aqueous solution under visible light.

30p capheviahe27 23-02-2021 20 5   Download

In order to understand the photocatalytic mechanisms of N-doped TiO2 with different doping positions of N, this research performed ab-initio calculations based on density functional theory (DFT) without and with Hubbard U correction, concentrate on the electronic structure of the materials.

8p tamynhan9 02-12-2020 24 2   Download

Titanium dioxide (TiO2) coated on multi-walled carbon nanotubes (CNTs) was synthesized with CNTs and TiO2 using the grinded method. The XRS spectra include that of the obtained single-phase anatase sample. The UV-Vis diffuse reflectance spectra show that the composite material can absorb at a higher wavelength and the absorption covers the whole visible region.

6p tamynhan9 02-12-2020 11 2   Download

Characterization results show that N-doped TiO2 samples have a broader absorption spectrum and a higher antibacterial efficiency against E. coli than pure samples. The DFT calculation suggests that nitrogen ion doping induces the formation of new states closed to the valence band leading to a narrowing of the band gap and a great improvement in photocatalytic activity in the visible light region of the doped material.

8p tamynhan8 04-11-2020 8 1   Download

TiO2-Graphene Oxide-Hemin (TiO2/GO/Hemin) ternary composite hybrid material was prepared by the sol-gel method and used as a heterogeneous catalyst for the photocatalytic degradation of organic contaminants. The catalytic activity of GO-TiO2-Hemin was evaluated by the degradation of Rhodamine B (RhB) under the UV-visible light irradiation and in the presence of hydrogen peroxide.

9p tamynhan4 06-09-2020 18 3   Download

The experimental results show that the highest photocatalytic activity was obtained from the Ag (5) doped Zn-0.75Al-0.25La-CO3 photocatalysts calcined at 500 0C with a degradation efficiency of 99,4 after 40 min of irradiation only. This study could provide a new route for the fabrication of high performance photocatalysts and facilitate their application in the environmental remediation issues.

13p tamynhan4 06-09-2020 9 2   Download

In the present study, GNPs/Ti-Fe binary oxide composites were synthesized from ilmenite of Central Viet Nam using hydrothermal method. The effect of amount of Fe on the morphology, structure and photocatalytic performance of prepared materials were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV–VIS Diffuse Reflectance spectrophotometer, Energy-dispersive X-ray spectroscopy and BET techniques.

10p abcxyz123_02 03-03-2020 18 3   Download

The objectives of the thesis: The thesis focused on the synthesis of Mn, Ce, C doped ZnO nanoparticles materials and doped ZnO with multi-layered carbon nanotube nanocomposite materials and assessed their photo-oxidative potentiality through photocatalytic reactions of methylene blue (MB) decomposition in aqueous solution under visible light.

30p phongtitriet000 08-08-2019 43 4   Download