Preparation of blends based

In the present study, we have made an attempt to prepare complexed PVA-PVP-KNO3-BaTiO3 blend composite polymer electrolyte membranes composed of potassium nitrate (KNO3) as salt and BaTiO3 of various concentrations as filler and studied their properties. The advantages of addition the fillers are the increase in ionic conductivity at room temperatures and the improvement of the stability at the interface with electrodes.

12p dianmotminh02 03-05-2024 11 2   Download

The blends based on polyvinyl chloride (PVC), nitrile-butadiene rubber (NBR), natural rubber (NR) and polyethylene (PE) were made by three different methods. The mechanical properties of these blends in dependence of mixing time and temperature were characterized. The result showed that the two-step blending method, where PVC and NBR were first mixed together and then blended with NR and PE, is the best one to prepare blends with high mechanical properties.

6p 12120609 01-06-2020 16 0   Download

This paper deals with using stainless steel reducing slag (SSRS), a byproduct generated from stainless steel making process, as a cement substitute in production of soil-based controlled low-strength material (CLSM). In the CLSM mixture, surplus soil and river sand were blended well together with a sand-soil proportion of 6:4 by volume in order to produce fine aggregate. Totally, twelve mixtures were prepared for experiment when we changed in turn percentages of Portland cement replacement with SSRS of 0%, 10%, 20%, and 30% by weight and the water-to-binder ratio of 3.4, 3.6, and 3.8.

5p cathydoll5 26-02-2019 21 0   Download

The objective of the research is to assess the reinforcement possibility of CNT in the rubber substrate and blend rubber in order to create rubber nanocomposite materials with a high mechanical properties, sustainability in the solvent, and suitable electrical conductivity.

28p change04 08-06-2016 44 4   Download

The study on the relationship between technological parameters and mechanical properties of the blends has been carried out. According to the obtained results, the suitable conditions to prepare rubber powder for the following blending step were established. The thermoplastic elastomeric blend based on poly(vinyl chloride) (PVC) and vulcanized butadiene-acrylonitrile rubber (NBR) containing dioctylphtalate (DOP) processes good mechanical properties.

5p uocvong04 24-09-2015 60 3   Download