Simulation

Nghiên cứu này nhằm đánh giá khả năng năng tăng sinh của tế bào gan Chang (CCL-13) sau cảm ứng vi trọng lực mô phỏng (Simulated microgravity-SMG) thông qua việc đánh giá số lượng tế bào, sức sống và sự biểu hiện của các gene liên quan đến chu kì tế bào.

10p viengfa 28-10-2024 1 1   Download

This study focuses on evaluating short-term deflections of reinforced concrete beams according to the Vietnamese Standard on the Design of Concrete and Reinforced Concrete Structures (TCVN 5574:2018) by comparing them with simulated results obtained from Abaqus software.

9p viengfa 28-10-2024 1 1   Download

This paper evaluates an energy harvesting strategy for UAVs from sunlight and laser beams on cloudy days with a low-level cloud layer. The channel models and harvested powers for both cases are considered and analyzed using mathematical equations and simulation results.

7p viengfa 28-10-2024 3 2   Download

This paper presents a design study of a wavelengthrouted optical router based on flat waveguide components on the Silicon-on-Insulator (SOI) platform compatible with CMOS fabrication processes. The design incorporates Arrayed Waveguide Gratings (AWG), Bragg scattering gratings, and is assisted by resonant ring couplers.

8p viengfa 28-10-2024 2 1   Download

The paper explores the application of the Modal Truncation algorithm in Model Order Reduction, focusing on its effectiveness in reducing high-dimensional mathematical model. The algorithm identifies dominant modes governing dynamic responses, discards the high-order model, and reconstructs a new model with reduced dimensions.

6p viengfa 28-10-2024 3 2   Download

This research provides a comprehensive investigation of the planar anisotropy in stainless steel SUS 304. Constitutive modeling approaches, employing both associated and non-associated flow rules, using quadratic functions have been applied in the simulation process.

10p viengfa 28-10-2024 2 2   Download

This study employs a two-step method to examine the seismic response of offshore wind turbine (OWT) systems supported by monopile foundations. In the first step, the soil-monopile interaction (SMI) is simulated using the professional software program OpenSeesPL.

9p viengfa 28-10-2024 2 2   Download

This study focuses on investigating the effect of negative pressure on the structure and diffusion processes of Silicon dioxide at liquid nitrogen temperature. The insights gained from this study will serve as a foundation for future experimental research aimed at the development and manufacturing of advanced materials.

11p viengfa 28-10-2024 2 2   Download

This paper develops an Artificial Neural Network (ANN) model based on 96 experimental data to forecast the dynamic modulus of asphalt concrete mixtures. This study applied the repeated KFold cross-validation technique with 10 folds on the training data set to make the simulation results more reliable and find a model with more general predictive power.

9p viengfa 28-10-2024 5 2   Download

In this research, Molecular Dynamics (MD) simulations were conducted to explore the temperature effect on the microstructure and phase transition of the Ag0.25Au0.75 alloy. The findings reveal that as the temperature rises, the material's phase transition switches from crystalline to liquid and vice versa.

9p viengfa 28-10-2024 4 1   Download

In this paper, the type of obstacle micro mixer model was designed and investigated by numerical simulation to improve the mixing efficiency. Passive mixers with tail-added obstacles structures were studied and compared with other conventional T microstructures, and then their mixing performance was numerically evaluated.

14p viling 11-10-2024 3 1   Download

This article proposes a solution by advocating for the integration of multimedia technology into educational software, offering interactive simulations, virtual reality experiences, and mulmedia presentaons to bring national defense and security concepts to life.

8p viling 11-10-2024 1 1   Download

Bài viết tập trung vào việc tính toán và nghiên cứu độ bền cục bộ của các dạng kết cấu cầu dẫn đang được áp dụng hiện nay, bằng việc sử dụng phương pháp phần tử hữu hạn (FEM) thông qua phần mềm Solidworks Simulation.

6p vifilm 11-10-2024 1 1   Download

This study utilizes 3D simulations to assess the influence of four different ECAP routes on the mean strain and strain homogeneity on the M1 copper plate. After six passes, the simulation results significantly improved the mean strain and strain homogeneity.

5p vifilm 11-10-2024 2 1   Download

This study evaluates the effect of the air gap size (d) on the air uniformity in the chamber dryer with the most appropriate air blade angle value inherited from the previous study. Furthermore, several cases of tray and equipment length are also tested, and they also affect the air distribution.

5p vifilm 11-10-2024 2 1   Download

Composting is a useful waste treatment for environmental problem, but composting experiment is challenging due to large-scale requirement. Thus, laboratory-scale reactor is of interest for composting experiment. The capability of laboratory-scale reactor to simulate large-scale composting was determined by assessing the quality of produced compost via germination index.

6p viling 11-10-2024 2 1   Download

This study aims to contribute to the development of a GaN/Ga2O3 diode that can be utilized in high-power device applications. The simulated device is calibrated against experimental GaN and Ga2O3 diodes, considering the effect of thickness of GaN layer and its doping concentration on the performance of GaN/Ga2O3 diodes. The band structures of devices are investigated to revial which factors that affect the properties of GaN/Ga2O3 diode.

6p viling 11-10-2024 4 1   Download

Turbines are the most common devices used in the field of wind energy and tidal energy. They are also the main research objectives of scientists worldwide. Different research methods are applied to study these devices, including the numerical simulation method. This is an advanced approach that helps to save costs of calculation, but it still keeps the accuracy.

9p viling 11-10-2024 2 1   Download

90Y PET/CT imaging is performed after radioembolization to re-evaluate the resin microsphere distribution and estimate the absorbed radiation dose of target tumor. The purpose of our study is to validate the utility of 90Y PET/CT compared to SPECT/CT simulation in dosimetry and prediction of treatment response.

8p viling 11-10-2024 1 1   Download

Calculating intra-aneurysm flow uses optical flow with computational fluid dynamics simulation on the numerical analysis. This is a new method to better understand the intravascular flow and aneurysm flow as well as factors related to the inflow vortex and the inflow jet which increase the rupture risk in patients with an aneurysm.

9p viling 11-10-2024 2 1   Download