Steel castings
-
Part 2 book "Automotive engineering - Lightweight, functional, and novel materials" includes content: Formability of aluminum alloys, ductile magnesium, enhancement of crashworthiness in cellular structures, compressive properties of cellular metals, heavily deformable al alloy, stainless steel sandwich sheets with fibrous metals cores, welding and joining, titanium aluminide based intermetallic alloys, casting processes and simulation tools, damage tolerance in composite structures, high performance autosport surface treatments and composites.
183p dianmotminh01 20-05-2024 2 1 Download
-
"Standard Specification for Castings, Austenitic, for Pressure-Containing Parts" covers austenitic steel castings for valves, flanges, fittings, and other pressure-containing parts. A number of grades of austenitic steel castings are included in this specification. Since these grades possess varying degrees of suitability for service at high temperatures or in corrosive environments, it is the responsibility of the purchaser to determine which grade shall be furnished.
7p hth_hn_vn 10-12-2023 7 5 Download
-
"Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service" covers steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for low-temperature service.
5p hth_hn_vn 10-12-2023 7 5 Download
-
"Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines" covers one grade of martensitic stainless steel and several grades of ferritic steel castings for cylinders (shells), valve chests, throttle valves, and other heavy-walled castings for steam turbine applications.
6p hth_hn_vn 10-12-2023 8 5 Download
-
"Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service" covers alloy steel castings, which have been subjected to special heat treatment, for valves, flanges, fittings, and other pressure-containing parts intended primarily for high-temperature service.
3p hth_hn_vn 10-12-2023 8 5 Download
-
This specification covers centrifugally cast alloy steel pipe intended for use in high-temperature, high-pressure service. Several grades of ferritic steels are covered. Their compositions are given in Table 1.
5p hth_hn_vn 10-12-2023 8 6 Download
-
This specification covers austenitic alloy steel pipe for use in high-temperature, corrosive, or nuclear pressure service. Several grades of austenitic stainless steel are covered as indicated in Table 1. Optional supplementary requirements are provided when additional testing may be required.
5p hth_hn_vn 10-12-2023 5 5 Download
-
This specification covers iron-base, heat-resisting alloy castings of the 25 % chromium, 12 % nickel class, intended for structural elements, containers, and supports in electric furnaces, petroleum still tube supports, and for similar applications up to 2000°F [1095°C].
4p hth_hn_vn 10-12-2023 5 4 Download
-
This specification covers low-alloy steels and martensitic stainless steels in the normalized and tempered, or quenched and tempered, condition suitable for pressurecontaining parts. The weldability of the classes in this specification varies from readily weldable to weldable only with adequate precautions, and the weldability of each class should be considered prior to assembly by fusion welding.
6p hth_hn_vn 10-12-2023 5 4 Download
-
This practice covers the qualification of procedures, welders, and operators for the fabrication and repair of steel castings by electric arc welding.
19p hth_hn_vn 10-12-2023 6 3 Download
-
This specification covers carbon steel castings for general applications that require up to 70 ksi (485 MPa) minimum tensile strength. Several grades and two classes of steel castings are covered, as indicated below. The grade and class desired shall be specified by the purchaser.
4p hth_hn_vn 10-12-2023 6 4 Download
-
"Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products" covers the requirements for zinc coating (galvanizing) by the hot-dip process on iron and steel products made from rolled pressed and forged shapes, castings, plates, bars, and strips. This specification covers both unfabricated products and fabricated products, for example, assembled steel products, structural steel fabrications, large tubes already bent or welded before galvanizing, and wire work fabricated from uncoated steel wire.
8p hth_hn_vn 10-12-2023 6 4 Download
-
"Standard Specification for Steel Castings, Austenitic Manganese" covers Hadfield austenitic manganese steel castings and alloy modifications. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
3p hth_hn_vn 10-12-2023 8 4 Download
-
"Standard Specification for Steel Castings, High Strength, for Structural Purposes" covers carbon steel, alloy steel, and martensitic stainless steel castings that are to be subjected to higher mechanical stresses than those covered in Specification A27/A27M.
5p hth_hn_vn 10-12-2023 4 4 Download
-
"Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service" covers carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service and of quality suitable for assembly with other castings or wrought-steel parts by fusion welding. Three grades, WCA, WCB, and WCC, are covered in this specification. Selection will depend upon design and service conditions, mechanical properties, and the high temperature characteristics.
4p hth_hn_vn 10-12-2023 6 6 Download
-
"Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service" covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for high-temperature and corrosive service. One grade of martensitic stainless steel and nine grades of ferritic alloy steel are covered.
5p hth_hn_vn 10-12-2023 6 5 Download
-
"Standard Specification for Welded and Seamless Steel Pipe Piles" nominal (average) wall steel pipe piles of cylindrical shape and applies to pipe piles in which the steel cylinder acts as a permanent load-carrying member, or as a shell to form cast-in-place concrete piles.
7p hth_hn_vn 10-12-2023 6 5 Download
-
"Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles" covers the procedure for locating, by the use of a solution of copper sulfate, the thinnest spot in a zinc coating (hot dipped, electroplated, or sprayed) on iron or steel articles that are coated after the shape is produced by casting, drawing, pressing, or other forming methods.
4p hth_hn_vn 10-12-2023 9 3 Download
-
"Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application" covers iron-chromium and ironchromium-nickel alloy castings for heat-resistant service. The grades covered by this specification are general purpose alloys and no attempt has been made to include heat-resisting alloys used for special production application.
4p hth_hn_vn 10-12-2023 8 4 Download
-
This specification covers chromium-nickel alloy castings intended for heat-resisting and elevated-temperature corrosion applications, such as structural members, containers, supports, hangers, spacers, and the like, in corrosive environments up to 2000°F [1090°C].
3p hth_hn_vn 10-12-2023 8 4 Download