Structural parameters

In this article, the authors have researched and evaluated the effectiveness of load transfer according to deflection through the application of the 3D finite element method. The model utilizes material parameters and actual airport hard pavement structures and calculates for many types of aircraft commonly operating in Vietnam.

12p viyoko 01-10-2024 5 1   Download

In this work, Ag(Cu)InS2 semiconductor nanoparticles were synthesized via microwave and solvothermal methods. The effects of synthetical parameters on the structure and morphology of the nanoparticles were characterized by XRD, SEM, TEM, UV–Vis, and EDX. The experimental results reveal that the AgInS2 compound can be crystallized in two different phases, which are tetragonal and orthorhombic.

6p vikwong 29-09-2024 2 1   Download

Two ionic liquids named triethyl ammonium oleate ([TEA][Oleate] and triethyl ammonium stearate ([TEA][Stearate]) were synthesized from triethyl amine and oleic/stearic acids in water and in ethanol solvents. The synthesized ionic liquids were characterized by FT-IR and NMR spectra to confirm their structure. The influence of some parameters such as structure of ionic liquid anion, solvent, reaction time, reaction temperature, and acid/amine molar ratio on the synthesis processes of triethyl ammonium oleate and triethyl ammonium stearate was investigated.

6p vikwong 29-09-2024 3 1   Download

In this paper, the provisions for predicting the punching shear capacity of two-way reinforced concrete (RC) flat slabs without shear reinforcement including ACI 318-19, Eurocode 2 and TCVN 5574:2018 provisions are reviewed by mean of considering the influences of the main parameters (effective depth, compressive strength of concrete, loaded area, reinforcement ratio).

14p vifilm 24-09-2024 1 1   Download

This article presents the modeling and the nonlinear dynamic analysis of base-isolated frame structures using linear theory (with non-classical damping matrix) and nonlinear theory (with 6-parameter Bouc-Wen bearing model). The computations are done with the aid from Julia scientific language.

8p viyoko 24-09-2024 4 1   Download

The hydraulic rock splitter with a wedge-type splitting head has various advantages, such as simple operation, high work efficiency, safety, shortened work time, and minimal environmental impact. This paper introduces the general structure of the rock splitter machine and the hydraulic cylinder-driven splitting head, along with the method for selecting suitable parameters.

13p vifaye 20-09-2024 2 1   Download

This work aims at investigating the effect of aleatoric uncertainty of creep rock properties on the stability of an underground structure. This uncertainty relates to the spatial variability of the mechanical parameters representing the time-dependent behavior of geological rock formation due to the change in its mineralogy.

13p vifaye 20-09-2024 3 1   Download

This paper aims to apply the developed ADE to optimize truss structures subjected to frequency constraints. In addition, limitations of the AOA are also discussed, as well as how to overcome them. In each iteration, a randomly generated probability parameter is used to determine whether AOA or DE that would be used to generate new candidate solutions in the population.

16p vifaye 20-09-2024 2 1   Download

The C-EPS steering system's performance is affected by a range of technical parameters, including steering column inertia, steering column stiffness, column damping, rack stiffness, rack damping, and steering column pinion radius. The simulation results in both the frequency domain and the time domain indicate the influence of structural parameters on the system characteristics.

7p tuongbachxuyen 05-08-2024 3 1   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. The findings of this thesis will provide clear guidelines for the selection of processing parameters for additively manufactured TPU parts and the method of casting complicated concrete structures with additively manufactured TPU mould.

98p runordie3 06-07-2022 13 3   Download

In present paper "Equation of state and thermal expansion of metals with FCC structure: Application to Cu, Al and Ni", by the statistical moment method (SMM) we obtain the equation of state for metals with cubic structure at temperature 0 K and pressure P and from that obtain the expressions of lattice parameter and thermal expansion coefficient for these metals at temperature T and pressure P.

6p runordie3 27-06-2022 13 2   Download

In recent years, seismicity has increased considerably in the Aegean Sea region and there have been earthquakes in which people lost their lives. The major earthquakes, Kos Island-Gökova Bay (Mw = 6.6), Lesvos Island-Karaburun (İzmir) (Mw = 6.2) and Samos Island-Aegean Sea (Mw = 6.9) occurred in the Aegean Sea and affected Aegean region strongly. Within the scope of this study, the seismic b-value of these major earthquakes was calculated in order to perform earthquake statistical analysis.

18p tanmocphong 29-01-2022 12 0   Download

The tectonic and structural properties of Erzurum and its surroundings have been investigated by evaluating the seismotectonic b - value, magnetic anomaly, edge detection analysis (total horizontal derivative (THDR) and tilt angle (TA)), Curie Point Depth (CPD), P-wave velocity (Vp), and Vp / Vs (S - wave velocity) ratio and by imaging the regional distributions of these parameters. For this purpose, all parameters have been combined to be able to reveal the new useful results on the study region and are presented for different locations and depths.

24p tanmocphong 29-01-2022 25 2   Download

The main theme of the dissertation: The dissertation targets the basic research on the physical models and new structures; calculating and simulating the bistable devices using 1D, 2D PhC structures. The effects of the PhC configuration and structural parameters on the optical characteristics and working performance of bistable devices will be investigated.

28p extraenglish 24-05-2021 22 4   Download

The dissertation targets the basic research on the physical models and new structures; calculating and simulating the bistable devices using 1D, 2D PhC structures. The effects of the PhC configuration and structural parameters on the optical characteristics and working performance of bistable devices will be investigated.

28p capheviahe27 23-02-2021 13 3   Download

Find the optimal technology parameters and components for fabricating Fe-based nanomaterials using high-energy ball milling method; clarify the relationship between technological conditions with the structural characteristics and magnetic properties of fabricated materials; assess the applicability of Fe, Fe-Co nano materials in fabricating nanocomposite magnets and magnetic induction heating.

24p capheviahe26 25-01-2021 18 1   Download

The aims of this study are to develop and apply the method of using frequency response functions to diagnose cracks in elastic bar and beams structure. The contents of the study includes: building models of cracked elastic bar and 3 beams structure; studying the changes of oscillation parameters, mainly frequency response functions due to cracks.

27p larachdumlanat129 20-01-2021 23 6   Download

To successfully fabricate on-chip sensors based on α-Fe2O3, ZFO NFs and their loading with RGO by on-chip electrospinning. To explore the effect of parameters (i.e. solution composition, heat treatment, electrospun time, and RGO concentration) of fabrication process on the NF morphology, structure and H2S gas sensing properties.

27p kequaidan7 01-09-2020 12 1   Download

To successfully fabricate sensor based on α-Fe2O3, ZFO NFs and their loading with RGO by on-chip electrospinning method. To explore the effect of fabrication parameters (i.e. solution composition, heat treatment, electrospun time, and RGO concentration) on the NF morphology, structure and H2S gas sensing properties. To clarify H2S gas-sensing mechanism of the sensors of α-Fe2O3, ZFO NFs and their incorporation with RGO.

141p trinhthamhodang7 31-08-2020 12 2   Download

In this paper, we report a numerical calculation of the influence of structural parameters on the supercontinuum generation of photonic crystal fibers. A photonic crystal fiber based on the fused silica glass, eight rings of air holes ordered in a hexagonal lattice, is proposed. Guiding properties in terms of dispersion and confinement loss of the fundamental mode are also studied numerically. As a result, the broadband width of the supercontinuum spectrum will increase when the lattice pitch decreases or the diameter of air hole in the cladding increases.

8p kethamoi6 01-07-2020 30 4   Download