Summary of material science doctoral thesis

The thesis is performed theoretically and experimentally. The theoretical studies on the dynamics of the single short pulse emission using transient cavity method and narrow linewidth and tunable wavelength generation using Littrow grating configuration were performed. On the other hand, the experimental investigations were carried out Experimental research was carried out based on the optimal results obtained by the theoretical studies.

27p beloveinhouse01 15-08-2021 35 4   Download

The research in this thesis follows two directions: The first, using high performance computing currently available, we studied atomic and molecular emissions in astrophysical environment. The radiative transfer model was applied to explain the characteristics of the recombination line masers Hnα in the envelope of the star MWC 349A.

27p beloveinhouse01 15-08-2021 20 4   Download

Goals of the thesis: Preparing of zirconia/silane combined films on steel subtrate for organic coatings to replace phosphate and chromate pretreatment; Proposing the mechanism of film formation process and assessing characteristics of morphology, composition, electrochemical properties and bonding of the zirconia/silane film.

27p extraenglish 24-05-2021 24 5   Download

Target of thesis: To develop a method that can simplify the determination of the thermodynamic parameters and XAFS spectra which base on the second-order cumulant only. In particular, this method can be applied for both theoretical calculations and experimental measurements in the XAFS method.

27p extraenglish 24-05-2021 34 5   Download

In this thesis, we research and fabricate AgNDs, AgNFs, AuNFs structures on silicon by chemical deposition and electrochemical deposition method for the main purpose of using as SERS substrate. To this target, we have studied the morphology, structure and some properties of the nanostructures produced.

26p extraenglish 24-05-2021 31 4   Download

The research objectives of the thesis: Improve the usability and quality of LED-based lighting products. Develop a new generation of high-efficiency LED lights, evenly distributed, eliminating light pollution, and replacing existing LEDs.

27p extraenglish 24-05-2021 20 5   Download

The objectives of the thesis: Research, fabricate Er3+-doped silica glass microspheres with different sizes by arc discharge method; building an experimental system to investigate WGM mode laser emission spectrum in the optical communication wavelength region ~ 1550 nm of some fabricated microspheres.

28p extraenglish 24-05-2021 17 4   Download

The main theme of the dissertation: The dissertation targets the basic research on the physical models and new structures; calculating and simulating the bistable devices using 1D, 2D PhC structures. The effects of the PhC configuration and structural parameters on the optical characteristics and working performance of bistable devices will be investigated.

28p extraenglish 24-05-2021 26 4   Download

Research purpose: Preparation and characterization of nanocarrier systems for drug delivery system based on the modification of dendrimer (PAMAM) with biocompatible surfaces such as PNIPAM and PAA to improve the capping cisplatin.

30p extraenglish 24-05-2021 28 4   Download

Research objectives of the thesis: Clarification influence of the elements Na, Sr and Ba substituting for La/Ca and crystal size on the magnetic properties, phase transition and magnetocaloric effects of La0,7Ca0,3MnO3 materials. Found the materials for significant mmagnetocaloric parameters have potential for applications in magnetic refrigeration.Determine the effect of replacing Sr/Ba for Ca in La0,7Ca0,3MnO3 and Co substituting for Mn in La0,7Sr0,3MnO3 on their critical behavior as well as the ferromagnetic interactions order.

31p extraenglish 24-05-2021 28 4   Download

Objective: Study on synthesis of nano dendrimer PAMAM with anticancer drugs carboplatin (CAR) and oxaliplatin (OXA) to reduce the toxicity of the drug to normal cells and improve the effectiveness on cancer cell destruction by increasing solubility, increasing drug storage capacity, targeting drugs passively.

27p extraenglish 24-05-2021 22 4   Download

The goal of the thesis: The thesis examined the effect of different nanostructured morphologies in conductive polymer films (PPy, PANi) on NH3 gas sensitivity. The thesis fabricated the nanostructured hybrid films between metal oxide (NiO) and conductive polymer (PPy) successfully and examined the NH3 gas sensitivity properties of the NiO / PPy hybrid film.

28p extraenglish 24-05-2021 30 3   Download

Successful synthesis of GdPO4:Tb3+ nanorods and Gd2O3:Eu3+ nanospheres; coating GdPO4:Tb3+ nanorods and Gd2O3:Eu3+ nanospheres with a silica shell, functionalizing with NH2 functional group, conjugating with anti-venom and anti-CEA antibodies for further biomedical applications.

27p capheviahe27 23-02-2021 31 6   Download

In this thesis, we research and fabricate AgNDs, AgNFs, AuNFs structures on silicon by chemical deposition and electrochemical deposition method for the main purpose of using as SERS substrate. To this target, we have studied the morphology, structure and some properties of the nanostructures produced.

26p capheviahe27 23-02-2021 35 4   Download

The objectives of the thesis: Research, fabricate Er3+-doped silica glass microspheres with different sizes by arc discharge method; building an experimental system to investigate WGM mode laser emission spectrum in the optical communication wavelength region ~ 1550 nm of some fabricated microspheres.

28p capheviahe27 23-02-2021 22 3   Download

The research objectives of the thesis: Improve the usability and quality of LED-based lighting products; develop a new generation of high-efficiency LED lights, evenly distributed, eliminating light pollution, and replacing existing LEDs.

27p capheviahe27 23-02-2021 30 3   Download

The dissertation targets the basic research on the physical models and new structures; calculating and simulating the bistable devices using 1D, 2D PhC structures. The effects of the PhC configuration and structural parameters on the optical characteristics and working performance of bistable devices will be investigated.

28p capheviahe27 23-02-2021 15 3   Download

Research purpose: Preparation and characterization of nanocarrier systems for drug delivery system based on the modification of dendrimer (PAMAM) with biocompatible surfaces such as PNIPAM and PAA to improve the capping cisplatin.

30p capheviahe27 23-02-2021 16 4   Download

Objectives of the study: To find out about orientational CNTs and graphene material - the formation, methods of synthesis, properties and applications; optimization of technological conditions to produce high quality oriented CNT and graphene materials using the thermal CVD method.

28p capheviahe27 23-02-2021 17 3   Download

The objectives of the thesis is: Determination of the concentration of the Naturally Occurring Radioactive Materials (NORM) in some building materials commonly used in Lao PDR such as cement, sand, etc. by gamma spectrometers using NaI(Tl) and HPGe detectors.

27p larachdumlanat129 20-01-2021 52 3   Download