Surface approach

This paper presents the development of an Artificial Intelligence (AI) and Machine Learning (ML) model designed to detect cracks on concrete surfaces. The objective is to enhance the automation, precision, and performance of crack detection using the computer vision algorithm.

13p viengfa 28-10-2024 2 2   Download

In the precipice of the digital age, organizations are navigating through a transformation that is not only technological but also ecological. In light of the increasing emphasis on sustainability within the business sector, Green Human Resource Management (Green HRM) has surfaced as a crucial approach that incorporates environmental stewardship into fundamental human resource operations.

10p vifilm 11-10-2024 2 1   Download

This study focuses mainly on the normal stresses that are caused by applied forces. As a case study, the present work aims at investigating the bi-dimensional contact mechanics of wavy cosinusoidal anisotropic finite planes. To achieve this objective, results on the displacement and stress component are first calculated with the help of the Lekhnitskii formalism.

9p vibecca 01-10-2024 1 1   Download

The prediction of ground settlement under tunnel excavation is still challenge. Almost engineer uses Mohr-Coulomb model in practice due to the conventional geotechnical investigation data. This paper describes the study of tunnel lining behaviors and ground surface settlement under tunneling process with a typical case study of twin tunnels excavation in Ho Chi Minh city, Vietnam.

11p vibecca 01-10-2024 1 1   Download

In this research, the smoothed finite element methods (S-FEM) based on the edge-based (ES) and node-based (NS) approaches are combined to develop for the 3-node triangular plate element which uses the mixed interpolation of tensorial components (MITC3) technique to remove the shear-locking phenomenon.

13p viyoko 01-10-2024 5 1   Download

A fuzzy finite element approach for static analysis of laterally loaded pile in multi-layer soil with uncertain properties is presented. The finite element (FE) formulation is established using a beam-on-two-parameter foundation model.

9p viyoko 24-09-2024 4 0   Download

The F2B slab model weakens the oscillations and calculations on F2B model quickly converge. However, the F2B model leads to artificial narrowness of band gap. Besides, when the number of layers increases, surface energy obtained from all three slab models approaches similar values. In particular, values of surface energy from DFT calculations converge to the experimental range for all three slab models.

8p dianmotminh02 03-05-2024 11 3   Download

The question sustained throughout the project, and developed into four key principal research aims or foci, framing my research approach and helping to define the field covered. These concerned: abstracting musical basslines into an environmental domain; articulating building materials through vibration; composing for a tactile sensation bodily experience; understanding the dialogue between hearing and sensation, and how felt and audible aspects affect awareness and perception of each other.

112p runthenight07 01-03-2023 7 3   Download

The document will be structured as follows: In Chapter 2 outline the methodology, discussing the computational techniques used to evaluate the interaction energies and evaluating the construction of the TT and D3(BJ) correction terms. Chapter 3 attempts to establish a foundational understanding of how these methods model vdW interactions by evaluating the performance of the corrected and uncorrected HF and DFT methods in comparison with CCSD(T) energies for a selection of inert gas dimers, and simple molecule-molecule interactions.

63p runthenight04 02-02-2023 9 2   Download

The rejects and membrane wash water were also treated in the bioreactor, resulted in complete removal of ClO4 ¯ through this approach. This is the first report where biotreatment is adopted as a pre- and post-treatment to membrane process for removing ClO4 ¯ , and this will find field application for treating ClO4 ¯ contaminated ground as well as surface water sources.

8p thebadguys 15-01-2022 10 3   Download

: In recent decades, the antimicrobial surfaces/coating properties towards a longlasting microbicidal effect have drawn enormous attention by researchers, they have been developed and used in a wide variety of high-touch hospital devices as a potential approach.

9p larachdumlanat127 02-01-2021 11 3   Download

The present work deals with a simple approach which predicts the optimum setting of process parameters of drilling operation on Polymer Based Glass Fiber (PBGF) composite.

9p lucastanguyen 01-06-2020 19 3   Download

In this paper, a method for determining the limit load surface of fiber-reinforced nonlinear composites such as elasto-plastic composite is proposed. Using the stress approach of the homogeneous theory and the linear matching method (LMM).

12p tohitohi 19-05-2020 15 0   Download

This article presents one of the key approaches to "increasing the efficiency of propellant" by regulation the grain velocity of the initial particles of propellant by absorbing camphor on their surfaces (phlegmatic propellant).

5p abcxyz123_02 03-03-2020 11 1   Download

The main purpose of this study is to identify the relationships between learning approach and various demographic factors. With these relationships identified, students’ learning approach can be predicted, and even in some case if we can change the factors students can adapt their learning approach toward deeper-oriented.

13p vinhbinhnguyen 14-06-2017 44 2   Download

(BQ) In this paper, attempts have been made to model and optimize process parameters in Electro-Discharge Machining (EDM) of tungsten carbide-cobalt composite (Iso grade: K10) using cylindrical copper tool electrodes in planing machining mode based on statistical techniques.

6p xuanphuongdhts 27-03-2017 34 2   Download

The heat of adsorption was determined from isotherm parameters, which in turn were calculated by Frendlich equation. The method was applied for the determination of adsorption heat of p-nitrophenol, p-nitroaniline and 2,4-dinitrophenol on TW-2 and CAL 12× 40 activated carbons. With the approach, it is easily to cover the influence of the whole range of surface loading on the heat of adsorption, especialy in low surface coverage.

7p lalala7 16-12-2015 30 2   Download

In seminiferous tubules, Sertoli cells provide structural and nutritional support for the developing germinal cells. Cellto-cell signaling and cell adhesion require proteoglycans expressed at the cell membrane. A preliminary biochemical and structural approach indicated that cell surface proteoglycans are mostly heparan sulfate proteoglycans (HSPG). Glypican-1, syndecans-1 and -4 were identified using a molecular approach.

9p research12 01-06-2013 41 5   Download

In this paper we address the problem of extracting features relevant for predicting protein±protein interaction sites from the three-dimensional structures of protein complexes. Our approach is based on information about evolutionary con-servation and surface disposition. We implement a neural network based system, which uses a cross validation proce-dure and allows the correct detection of 73% of the residues involved in protein interactions in a selected database comprising 226 heterodimers.

6p research12 29-04-2013 30 3   Download

The protonation state of residues around the Qo binding site of the cyto-chrome bc1 complex from Paracoccus denitrificansand their interaction with bound quinone(s) was studied by a combined electrochemical and FTIR difference spectroscopic approach. Site-directed mutations of two groups of conserved residues were investigated: (a) acidic side chains located close to the surface and thought to participate in a water chain leading up to the heme bLedge, and (b) residues located in the vicinity of this site. ...

13p inspiron33 23-03-2013 40 5   Download