Surface thermal resistance

Thermal spray-applied AlMg alloy coatings are frequently utilized in a variety of technical applications because of great corrosion resistance, and environmental friendliness. In this work, the effect of abrasive spraying parameters on the surface roughness of CT3 steel specimens as well as the effect of the surface roughness on the adhesion strength of Al-Mg alloy spray coating were experimentally investigated.

7p vigojek 02-02-2024 6 2   Download

Graphene has been extensively considered as an ideal additive to improve the mechanical properties of many composite materials, including rubbers, because of its novel strength, high surface area, and remarkable thermal and electron conductivity. Styrene Butadiene Rubber (SBR) is considered a good material for abrasion resistance conveyors in industries.

7p visybill 19-07-2023 6 3   Download

Polyester (polyethylene terephthalate) is one of the most widely used polymers in textiles. Despite all the advantages of this polymer, its low thermal resistance limits its use in filters and protective textiles. On the other hand, polyester nonwovens are used in many products as wipes, filters, and padding. The surface properties of polyester nonwovens are often not perfect for a specific application and need to be modified. Different ways, including coating, have been developed to modify their surface properties.

6p tudichquannguyet 29-11-2021 12 1   Download

SiO2 and TiO2 sols were successfully synthesized by using sodium silicate and titanium chloride as Si and Ti sources. SiO2-TiO2 sol coated polyester/cotton fabric was fabricated by deepcoating method and using SiO2 , TiO2 sols as coating materials. SiO2 -TiO2 coated fabric were characterized by XRD, FTIR, TGA, SEM and EDX. From SEM image, it showed the SiO2, TiO2 particles of 20-30 nm which well deposited on fabric surface. TGA result revealed the significant improvement of thermal resistance and stability of SiO2-TiO2 coated fabric as compared to those of uncoated fabric.

8p kequaidan11 07-04-2021 17 2   Download

A simplified procedure of lock-in thermography was developed and applied for characterization of nuclear materials. The possibility of thickness and thermal diffusivity measurements with the accuracy better than 90% was demonstrated with different metals and Zircaloy-4 claddings.

5p christabelhuynh 30-05-2020 6 0   Download

The application of emulsion for combined heat extraction and lubrication requires continuous monitoring of the quality of emulsion to sustain a desired grinding environment; this is applicable to other grinding fluids as well. Thus to sustain a controlled grinding environment, it is necessary to adopt an effectively lubricated wheel-work interface.

10p kequaidan1 16-11-2019 51 1   Download

The radiation of the sun in which the planet is incessantly plunged, penetrates the air, the earth, and the waters; its elements are divided, change direction in every way, and, penetrating the mass of the globe, would raise its temperature more and more, if the heat acquired were not exactly balanced by that which escapes in rays from all points of the surface and expands through the sky.

762p nhatkyvodanh 11-08-2012 64 10   Download

CHAPTER 54 COOLING ELECTRONIC EQUIPMENT Allan Kraus Allan D. Kraus Associates Aurora, Ohio 54.1 THERMAL MODELING 54. 1 . 1 Introduction 54. 1 .2 Conduction Heat Transfer 54.1.3 Convective Heat Transfer 54.1.4 Radiative Heat Transfer 54.1.5 Chip Module Thermal Resistances HEAT-TRANSFER CORRELATIONS FOR ELECTRONIC EQUIPMENT COOLING 54.2.1 Natural Convection in Confined Spaces 1649 1 649 54.3 1649 1652 1655 1656 54.2.2 Forced Convection 1662 1667 1672 1672 1674 THERMAL CONTROL TECHNIQUES 54.3.1 Extended Surface and Heat Sinks 54.3.2 The Cold Plate 54.3.3 Thermoelectric Coolers 54.

31p hadalabo 29-09-2010 78 7   Download

One of the most promising, generally applicable and well-adopted methods to enhance the surface performance of materials is the use of coatings. The reason is that it is extremely difficult and expensive to meet homogeneous materials having on their surface the ensemble of desired properties, such as high hardness, wear resistance, adequate stiffness, increased ductility, chemical inertness, stainlessness, controllable electrical and thermal conductivity behavior, etc.

19p vaseline 30-08-2010 89 9   Download