![](images/graphics/blank.gif)
Taguchi’s method
-
In this study, Taguchi's experimental design method was used to improve the yield of FOX-7. Verification of the results shows that the optimal synthesis parameters are as follows: the molar ratio of HNO3/MPD is 8, the reaction time is 180 minutes, and the reaction temperature is 15°C; the maximum yield of FOX-7 can reach 79.14%.
8p
viambani
18-06-2024
1
1
Download
-
PET bottles are widely used for drinking water. PET bottles’ quality depends on their thickness. The aim of this study is to find design variables and optimal parameters of the stretching blow molding (SBM) process of PET bottles in order to increase the uniformity of bottle thickness by using the simulation technique and Taguchi method.
5p
vigojek
02-02-2024
4
2
Download
-
Part 1 book "Advances in 3D printing and additive manufacturing" includes content: Influence of process parameters on tensile strength of additive manufactured polymer parts using taguchi method; determination and comparison of the anisotropic strengths of fused deposition modeling P400 ABS; current trends of additive manufacturing in the aerospace industry; influence of oxygen partial pressure on hydroxyapatite coating of additive manufactured component by pulsed laser deposition;...and other contents.
89p
muasambanhan06
01-02-2024
6
2
Download
-
This article presents a study on numerical simulation of the influence on operating parameters of an electrospinning device using the Taguchi method and analysis of variance (ANOVA).
9p
vimarillynhewson
02-01-2024
10
2
Download
-
Research on the microchannel and its flow and heat transfer properties has received much attention. This study employed Autodesk Inventor software to build the model, and the Computational Fluid Dynamics software (Ansys Fluent 14) was used for numerical simulation. Taguchi analysis methods, ANOVA, and Minitab statistics testing were used.
11p
vijeff
27-11-2023
8
6
Download
-
The study has successfully modeled and simulated a polymorphic tube based on the water lily stem using the robust statistical method and software. In this research, we rely on the structure of the lily to apply biological design to figure out the most influential factors in heat exchange and fluid flow.
11p
vijeff
27-11-2023
12
4
Download
-
Continued part 1, part 2 of ebook "Design for six sigma: In technology and product development" provides readers with contents including: tools and best practices for invention, innovation, and concept development; tools and best practices for design development; tools and best practices for optimization; tools and best practices for verifying capability; taguchi methods for robust design; design failure modes and effects analysis; the pugh concept evaluation and selection process;...
432p
hanlinhchi
29-08-2023
6
6
Download
-
In this paper, an approximation method is presented to calculate the reverse dynamics of the serial manipulators with rigid-flexible links. The linearization of the motion equations for a rigid-flexible translation and rotation of two-link manipulator (manipulator T-R) is addressed.
21p
viwolverine
11-07-2023
4
2
Download
-
In this paper, the input parameters of the milling process were studied including cutting speed (V), feed rate (f), and cutting depth (t). The Taguchi method was first used for experimental design.
8p
viironman
02-06-2023
2
1
Download
-
Rice husk (RH), an inexpensive waste material, was used to produce nanosilica that was then applied to fabricate composite with natural rubber. The optimization of process parameters on the weight of nanosilica using the Taguchi method was performed. Experimental specimens were then made to confirm optimum values for each process parameter.
6p
vidoctorstrange
06-05-2023
4
2
Download
-
Part 1 of ebook "Advances in 3D printing and additive manufacturing technologies" provide readers with content about: influence of process parameters on tensile strength of additive manufactured polymer parts using taguchi method; determination and comparison of the anisotropic strengths of fused deposition modeling P400 ABS; estimation of the effect of process parameters on build time and model material volume for FDM process optimization by response surface methodology and grey relational analysis;...
89p
damtuyetha
16-02-2023
5
2
Download
-
This research investigated the optimization of injection molding parameters for the minimum warpage of CD & DVD disc substrate of Polycarbonate (PC). CD & DVD disc substrate was first designed by Pro/E 5.0. The Moldflow Plastics Insight 6.1 is used to mesh and simulate the warpage. In order to find out recommended parameters, the study used Taguchi technique in decreasing warpage of CD & DVD substrate.
3p
vilexus
05-10-2022
15
5
Download
-
The surface finish of N-BK7 optical glass is improved by abrasive jet polishing (AJP) process. Taguchi’s method is employed to investigate optimal AJP parameters. The important parameters that influence the N-BK7 surface finish are determined by Analysis of variance (ANOVA).
5p
vichristinelagarde
04-07-2022
11
1
Download
-
Microarc oxidation method has been developed in the field of surface protection of magnesium alloys and considered as a simple, highly effective, commercial and environmentally friendly method in industry. MAO coatings are fabricated on novel Mg-AlLi-Zn alloy to improve the anti-corrosion performance of surface by using friendly alkaline electrolytes under a high electrical potential.
5p
vichristinelagarde
04-07-2022
7
1
Download
-
ZnO powder was synthesized via a hydrothermally assisted sol-gel method. Synthesis variables including Znprecursor type, pH value, time, and temperature of hydrothermal treatment were analyzed using the Taguchi approach. The experimental procedures were defined based on the L9 array for four variables in three levels. The influences of those variables on the response parameters, i.e. crystallite size, crystallinity, band gap energy (Eg), and degradation constants (k), were evaluated. XRD results and Eg values showed that ZnO wurtzite appeared to be the only crystalline phase in the samples.
12p
tudichquannguyet
29-11-2021
15
1
Download
-
Electrochemical impedance spectroscopy measurements were performed to capture the physically meaningful parameters of commercially available 18650 cylindrical and 2032 coin cells by using the equivalent circuit model. The impedance response of the batteries was systematically investigated and discussed. A detailed analysis was achieved providing a determination of influential factors on the equivalent circuit parameters. The results suggested that the cell type tested here influenced the equivalent circuit elements profoundly.
12p
tudichquannguyet
29-11-2021
9
2
Download
-
This paper presented a combined theoretical and experimental design methods to determine optimal parameters of a centrifugal pendulum vibration absorber (CPVAs), such as spring stiffness, damper oil viscosity, moment of uinertia of the system components, number of absorbers and assembly position. First, the system of equations of motion of the CPVA was established and solved using Finite Element method (FEM) and Runge-Kutta algorithm (RKA).
7p
chauchaungayxua11
23-03-2021
10
2
Download
-
This paper presented a method to reduce the torsional vibration of a shaft system with dynamic vibration absorber (DVA). A theoretical method was introduced to determine optimal parameters of the DVA, which included spring stiffness, viscous coefficient of damper, mass moment of inertia of the absorber, number, and radial position of springs and dampers. First, system equations of motion of the shaft and the DVA were elaborated using Finite Element method (FEM) and solved by Runge-Kutta algorithm to find the torsional vibration response.
6p
chauchaungayxua11
23-03-2021
12
1
Download
-
This study was performed by using the flank milling process to machine the thin wall of aluminum alloy. Using Taguchi method and ANOVA analysis, the effects of milling type and cutting conditions on the surface roughness were investigated.
11p
vinevada2711
19-03-2021
9
1
Download
-
Based on the number of previous studies, this study aims to investigate the effects of process parameters of an Electrochemical Machining process which are electrolyte concentration, voltage applied to the machine, feed rate of the electrode and Inter-Electrode Gap between tool and work - piece. Aluminum samples of 25 mm diameter x 25 mm height and 30mm diameter x 25mm height of the tool is made up of copper with a circular cross section with 2 mm internal hole. The design of the system is based on the Taguchi method.
12p
trinhthamhodang9
04-12-2020
20
3
Download