Tensile properties
-
This review paper aims to summarize the existing research to identify the main factors influencing the mechanical characteristics of cement-treated soil, specifically unconfined compressive strength (UCS), tensile strength, and modulus of elasticity.
17p viengfa 28-10-2024 1 1 Download
-
The main objectives of this research work are as follows: (i) to explore the sensitivity of macro, meso and micro fibers to tensile and compressive properties of SFCs, and (ii) to correlate the tensile strength to compressive strength of SFCs containing macro, meso and micro steel-smooth fibers.
12p vifilm 24-09-2024 3 1 Download
-
Tensile properties of strain-hardening fiber-reinforced concrete are the key engineering parameters in determining bending resistance of the material. In this paper, an analytical model to predict tensile properties of ultra-high-performance fiber-reinforced concrete (UHPFRC), a type of strain-hardening fiber-reinforced concretes, was performed based on single fiber pullout test.
13p vifaye 20-09-2024 1 1 Download
-
In civil engineering, distinct mechanical properties and behaviors of structural steel rods necessitate a novel approach to material modeling. This study extends the application of recently proposed strain-hardening laws, originally developed for automotive sheet metals, to several structural steel rods (CB240-T and CB300-T). Standard uniaxial tensile tests are conducted for each examined material to obtain experimental stress strain data.
11p xuanphongdacy06 18-09-2024 3 1 Download
-
Preparation and characterization of natural rubber grafted with methyl methacrylate (MMA) and vinytriethoxysilane (VTES) were performed in the present work. Graft copolymerization of methyl methacryate was carried out in latex stage, and VTES was added during the graft copolymerization of MMA.
6p viporsche 25-10-2022 13 4 Download
-
A gas metal arc welding robot was used to build a thin-walled component made of mild steel on a low-carbon substrate according to the AM principle. Thereafter, the specimens for observing microstructures and mechanical properties were extracted from the built thin-walled component. The microstructures of the specimen were observed by an optical microscope; the hardness was measured by a digital microhardness tester, and the tensile tests were carried out on a tensile test machine.
8p larachdumlanat127 02-01-2021 11 2 Download
-
At a temperature of 300 K, both Ni and Cu atoms are crystallized into the face-centered cubic (FCC) and the hexagonal close-packed (HCP) phases, respectively. The mechanical characteristics of the sample at 300 K were also analyzed in detail through the determination of elastic modulus, number of atoms, and void distribution during the tensile process.
8p tamynhan5 10-12-2020 15 3 Download
-
Both the epoxy strength and internal compressive strength were employed as factors in a compound law to numerically estimate the low-temperature tensile strength. This work presents a systematic analysis for changes in the CFRP material properties at low temperatures.
7p tamynhan4 06-09-2020 7 1 Download
-
The study was intended to evaluate the effect of reinforcement percentage on the deformation behaviour. The mechanical properties like hardness, tensile behavior, modulus of elasticity, yield stress have been carried out.
6p lucastanguyen 01-06-2020 17 2 Download
-
Polypropylene/ maleic anhydride /organic montmorillonite nanocomposites (PP/ MA/ Org-MMT) have been prepared via direct melt intercalation in an internal mixer. Maleic anhydride (MA) was used as a compatibilizer to improve the dispersability of the clay. The structures of nanocomposites have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Mechanical properties and thermal stability were determined by tensile analysis and thermogravimetric analysis (TGA), respectively.
8p 12120609 01-06-2020 19 2 Download
-
In this paper, a feasibility study concerning the generation of tensile specimens using a quenching dilatometer is presented. The ODS steel investigated contains 9%Cr and exhibits a phase transformation between ferrite and austenite around 870 °C.
8p christabelhuynh 30-05-2020 33 2 Download
-
In this paper residual stress in thick layer composites have been studied. Using numerical analysis, the curing process has been modeled and mechanical properties of a thick layer composite are obtained and the induced residual stress in these composites has been assessed. Unlike thin layer composites, the stress in each layer is not specific and a tensile and compressive stress field can exist simultaneously in thick layer composites.
12p tocectocec 25-05-2020 10 0 Download
-
This paper presents a novel composite material produced by a natural reinforcement subjected to tensile test. The used reinforcement is made of Diss fibers. The Diss (Ampelodesma mauritanica) is a Mediterranean wild plant.
6p tohitohi 19-05-2020 29 3 Download
-
Understanding mechanical properties of healthy and unhealthy cerebral vessels is a key element in the development of their science and the relevant clinical diagnosis, prevention and treatment. Thirteen healthy samples were obtained from 23 middle cerebral arteries. The changes of force and deformation until the vessel rupture were recorded using a biaxial device.
14p tohitohi 19-05-2020 13 0 Download
-
In this article, we investigated effect of carrier resin ratio and anti-oxidation additives content on properties of anti-oxidant additives Masterbatchs (MBs). The characteristics were measured by: melt flow index (MFI), morphology (SEM), tensile strength and elongation at break. The results indicated that: increasing LLDPE content in carrier resin led to decreasing mechanical properties, MFI weren’t uniform in MBs. With 80/20 of LDPE/LLDPE ratio, the tensile strength and elongation at break values were highest (21.0 MPa, 680.5 %).
7p abcxyz123_02 03-03-2020 30 3 Download
-
The application of prestressing steel is restricted in highly corrosive environment area due to corrosion of prestressing steel, which leads to reduction in strength and it may cause sudden failure. Carbon textile is considered as an alternate material due to its corrosive resistance property, high tensile strength and perfectly elastic. In this study, an experimental investigation was carried out to study the flexural behavior of prestressed and non-prestressed carbon textile reinforced concrete plates.
9p thayboitinhyeu 02-03-2020 28 2 Download
-
Document "Mechanical properties of solid polymer" presentation of content: Ideal Solids, tensile properties, shear properties, compressive properties, hardness, impact strength, coefficient of friction.
22p phamvanphat1891995 04-03-2016 50 1 Download
-
The study on the relationship between compositions and mechanical properties of the blends based on poly(vinyl chloride) (PVC), butadiene-acrylonitrile rubber (NBR) and natural rubber (NR) has been carried out. The result shows that in the presence of NBR, which plays role of transition phase between the two incompatible polymers PVC and NR, the tertiary phase polymer blends having high tensile strength and elongation at break were obtained.
4p uocvong04 24-09-2015 75 8 Download
-
The properties and morphology of compounds based on polyethylene (PE)/kaolin with the presence of PE-g-acrylamide (PE-g-AAm) have been studied. With PE-g-AAm the processing ability, adhesion, interaction between PE and kaolin, tensile strength as well as thermo-oxidation resistance of the compound of PE/kaolin have improved. The SEM study proves that it also decreases particle size of kaolin in the PE phase. At the contents of 8 and 10 wt% of PE-g-AAm are suitable for the compound of PE/kaolin (100/15, wt/wt) with high quality.
5p uocvong02 24-09-2015 52 3 Download
-
The HN-06 compound was found as compatibilizer for natural rubber (NR)-chloroprene rubber (CR) blend. The blend containing 0.8 wt% HN-06 compound gave good compatibility and it can be observed by scanning electron microscopy (SEM) image of two rubbers layer’s interface. Blend of NR/CR/HN-06 = 70/30/0.8 wt% have high mechanical properties the tensile strength 25.1 MPa, the tear strength 43.1 N/mm, the abrasion loss 0.044 g, good ozone and oil resistance.
5p uocvong02 24-09-2015 68 7 Download