![](images/graphics/blank.gif)
Tensile testing machine
-
Mechanistic study of hot cracking and development of new resistant Ni-based high-Cr alloy weld metal
The authors studied a novel thermal cycling test under tensile loading of the round-notched bar type specimen, using Gleeble test machine. In this kind of testing the mechanism of the DDC is thought to be different from the earlier observations and hypotheses.
6p
vicedric
08-02-2023
7
3
Download
-
A gas metal arc welding robot was used to build a thin-walled component made of mild steel on a low-carbon substrate according to the AM principle. Thereafter, the specimens for observing microstructures and mechanical properties were extracted from the built thin-walled component. The microstructures of the specimen were observed by an optical microscope; the hardness was measured by a digital microhardness tester, and the tensile tests were carried out on a tensile test machine.
8p
larachdumlanat127
02-01-2021
10
2
Download
-
The present experiment was conducted to study the effect of moisture content on strength properties of sorghum grain, grown in the state of Odisha by the majority of small and marginal farmers by using Universal Testing Machine (UTM).
8p
trinhthamhodang1215
23-09-2020
14
2
Download
-
In this study, Wood Ash (WA) prepared from the uncontrolled burning of the saw dust is evaluated for its suitability as partial cement replacement in conventional concrete. The saw dust has been acquired from a wood polishing unit. The physical, chemical and mineralogical characteristics of WA is presented and analyzed. The strength parameters (compressive strength, split tensile strength and flexural strength) of concrete with blended WA cement are evaluated and studied. Two different water-to-binder ratio (0.4 and 0.
7p
trinhthamhodang1
16-11-2019
14
1
Download
-
This study was conducted to evaluate the effect of ultrasound application on the surface microhardness (VHN) and diametral tensile strength (DTS) of three high viscous glass-ionomer restorative materials (HVGIRMs). For each test (VHN and DTS), a total of 180 specimens were prepared from three HVGIRMs (Ketac-Molar Aplicap, Fuji IX GP Fast, and ChemFil Rock). Specimens of each material (n = 60) were further subdivided into three subgroups (n = 20) according to the setting modality whether ultrasound (20 or 40 s) was applied during setting or not (control).
6p
trinhthamhodang1
16-11-2019
24
0
Download
-
Since AA2060-T8 was introduced in the past few years, investigating the mechanical response, fracture mechanisms, and anisotropic behaviour of AA2060-T8 sheets under high strain rate deformation has been crucial. Thus, uniaxial tensile tests were performed under quasi-static, intermediate, and high strain rate conditions using universal testing machines as well as split Hopkinson tensile bars.
19p
caygaocaolon1
13-11-2019
13
1
Download
-
Type 6201 aluminum alloy wires are produced by drawing 4.7 mm diameter billet-onbillet extruded redraw rod down to 2.7 mm diameter wires. Before drawing, the first group of redraw rod coils was annealed at 480 oC for 4 hours to reduce the hardness of the redraw rod.
10p
vidonut2711
08-11-2019
7
1
Download
-
CHAPTER 7 SOLID MATERIALS Joseph Datsko Professor Emeritus of Mechanical Engineering The University of Michigan Ann Arbor, Michigan 7.1 STRUCTURE OF SOLIDS / 7.1 7.2 ATOMIC BONDING FORCES / 7.2 7.3 ATOMIC STRUCTURES / 7.4 7.4 CRYSTAL IMPERFECTIONS / 7.11 7.5 SLIP IN CRYSTALLINE SOLIDS / 7.15 7.6 MECHANICAL STRENGTH / 7.17 7.7 MECHANICAL PROPERTIES AND TESTS / 7.20 7.8 HARDNESS / 7.21 7.9 THE TENSILE TEST / 7.25 7.10 TENSILE PROPERTIES / 7.32 7.11 STRENGTH, STRESS, AND STRAIN RELATIONS / 7.36 7.12 IMPACT STRENGTH / 7.42 7.13 CREEP STRENGTH / 7.43 7.14 MECHANICAL-PROPERTY DATA / 7.46 7.
21p
hadalabo
29-09-2010
56
8
Download
-
This chapter summarizes the structure of solids, including atomic bonding forces, atomic structures, crystal imperfections, slip, and mechanical strength. The section on mechanical properties and tests discusses all the hardness tests and includes a detailed explanation of the tensile test and tensile properties. The section on strength, stress, and strain
21p
thachsaudoi
22-12-2009
87
9
Download
CHỦ ĐỀ BẠN MUỐN TÌM
![](images/graphics/blank.gif)