Ultimate

This study introduces a practical and efficient methodology to improve the estimation of the ultimate axial bearing capacity of Pre-bored Grouted Planted Nodular (PGPN) piles, addressing a critical need in geotechnical engineering.

25p viyamanaka 06-02-2025 1 1   Download

This article examines the use of theme in English mechanical engineering (ME) discourse from systemic functional linguistics (SFL) perspective developed by Halliday and other systemists.

8p tuetuebinhan000 23-01-2025 2 1   Download

This paper investigates flexural behavior and analytical approach for predicting the load and deflection at critical performance points of reinforced concrete (RC) beams strengthened with prestressed carbon fiber-reinforced polymer (CFRP) sheets. A finite element model is developed to simulate the interaction between the RC beam and the CFRP sheets, capturing key aspects such as failure modes, ultimate load, and mechanical behavior across the three phases of failure.

7p vibenya 31-12-2024 4 2   Download

 Technical Seminar Effective solutions for motor starting and protection presents about IEC Standard and Motor Starting Methods; effective solutions for motor starting and protection motor protection agenda; motor protection manual motor starters ms132 rated ultimate short circuit breaking capacity; main electrical parameters of motors and somethings else.

28p ducxt1995 15-05-2015 44 6   Download

This study focuses on experimental testing and subsequent numerical analysis of impacted and pre-loaded composite coupons and bonded composite scarf joints under varying impact conditions. A methodology will be developed for the numerical modelling of preloaded impact tests to enable capture of critical failure modes and ultimate failure. The main aim is to validate a modelling strategy that will provide accurate failure characterisation of the tested joints using numerical analysis.

185p runthenight05 01-03-2023 19 3   Download

This research focuses on Fibre Cement Felts (FCF), which is a non-woven textile substrate acting as a conveyor belt for the manufacturing of Fibre Cement Sheets (FCS). Fibre Cement Felts are a valued component required in the manufacturing process of Fibre Cement Sheets, used in construction for today’s building industry. Identifying the key factors that most influence FCF will assist in understanding of the relationship between fibre diameters, carded web, and mechanical bonding.

137p runthenight07 01-03-2023 11 3   Download

This thesis investigates the SPH capability available in the commercial Finite Element (FE) code LS-DYNA®, for water impact problems. Experiments have been conducted on rigid wedges impacting water, which were then simulated with the SPH method. Although certain limitations were experienced with the experimental results, a positive correlation was observed with the numerical technique, thus establishing SPH as a promising method for crashworthiness design.

176p runthenight07 01-03-2023 14 3   Download

Organizations have long struggled with the successful completion of projects within the time, cost and performance indicators with respect to a customer product or solution that is expected to ultimately meet the customer’s expectations. This thesis demonstrates the link between the successful creation, management and dissemination of project requirements throughout the entire project process using a knowledge management overlay model to ensure the success of the overall project to meet stakeholder needs through the successful creation and transfer of project requirements.

353p runthenight04 02-02-2023 10 4   Download

The design of solar cars has historically been dominated by highly technical and performance-based criteria. This has limited the general acceptance of solar cars as a viable mode of transport in both the public eye and the automotive industry.

189p runthenight04 02-02-2023 11 3   Download

This research has investigated the possibility of using two photoplethysmography (PPG) sensors to measure blood oxygen saturation and through this monitor a patient’s pulse at two sites; the ear and the finger. Using these two simultaneous and continuous measurements the ultimate aim is develop a method of monitoring blood pressure.

183p runthenight04 02-02-2023 10 3   Download

Blood pressure (BP) is an important and commonly used vital sign to monitor a patient’s health. Current methods for monitor blood pressure are unsuitable for continuous, uninterrupted measurement of blood pressure outside of a hospital setting as such methods are invasive and could pose risks if complications occur. This research has investigated the possibility of using two photoplethysmography (PPG) sensors to monitor a patient’s pulse at two sites; the ear and the finger.

149p runthenight04 02-02-2023 14 3   Download

The failure of inflation targeting regimes in several emerging economies has received renewed interest among academics and policymakers alike. This ineffectiveness can be attributed to worsening fiscal positions in the aftermath of the Global Financial Crisis, which sheds light on the importance of coordinating fiscal policy and monetary policy to achieve price stability. This thesis, therefore, aims to investigate the effects of fiscal policy on the different transmission channels of monetary policy, which ultimately results in high inflation.

191p runthenight04 02-02-2023 7 3   Download

The ultimate aims of the study is to see how listening to conversations with subtitles improve. Especially, this study has two objectives: To find out the extent to which listening to English conversations with subtitles improved the non - major English students’ listening skills; to investigate the students’ attitudes towards listening to conversations with subtitles.

74p closefriend09 16-11-2021 20 4   Download

The ultimate aims of the study are to analyse of doctrine of contract performance upon unexpected changed circumstances, examine the provision of Vietnamese law, assess the application of this provision in a comparison with the provisions of international law and various national laws. Base on that, the study makes recommendations on revising law of changed circumstances and enhancing the implementation of this provision.

27p trinhthamhodang1217 14-01-2021 24 3   Download

The ultimate Adwords campaign kit present the content campaign pre-launch activities, organizing your campaign, running your campaign – daily, monthly check-in.

6p mymoneyugi 16-08-2020 25 4   Download

Composite materials have gained traction in the world today and are becoming of common use in industrial and specialized applications in general due to their flexible nature that involves mixing through layers or matrixes the components of various substances and therefore, a percentage of each substance’s physical properties.

12p lucastanguyen 01-06-2020 46 2   Download

The ultimate purpose of this study is to investigate the role of green supply chain integration on the sustainable performance of the oil and gas industry of Indonesia. To collect the data, a survey questionnaire was used, and questionnaires were distributed among the employees of oil and gas companies in Indonesia.

12p tocectocec 24-05-2020 21 3   Download

This work is focused on the influence of different friction stir welding (FSW) parameters on AA6082 T-6 and AA5083-O alloys welding quality, by using Taguchi, Grey Relational and Weight Method. Four welding parameters were investigated, namely tool rotation speed (TRS), welding speed (WS), tool pin profile (TPP) and shoulder diameter (SD).

16p tohitohi 19-05-2020 22 1   Download

The novel equivalent material concept, proposed originally by the author, was utilized together with the mean stress and the point stress failure concepts to predict the load-carrying capacity of O-notched ductile steel plates under pure tension.

12p tohitohi 19-05-2020 16 0   Download

Objectives of the thesis: The thesis will focus on studying the dynamic behavior of a planar mechanism which has one or more elastic bars, such as calculating the elastic deformation of the links, and assessing the effect of the deformation back on the movement of the structure during the work. The ultimate goal is to help minimize the negative impact of the elastic vibrations as well as limiting the elastic vibrations.

27p xacxuoc4321 09-07-2019 49 4   Download