![](images/graphics/blank.gif)
Vibration monitoring
-
Part 2 of ebook "Advances in smart technologies in structural engineering" provides readers with contents including: spatial filtering with discrete array sensors and distributed PVDF films; structural health monitoring using guided ultrasonic waves; controllability and asymptotic problems in distributed systems; mechatronics in vibration monitoring and control;...
123p
mothoiphong
28-06-2024
2
1
Download
-
Output-only methods based on machine/deep-learning algorithms are highly practical approaches for timely detecting potential damages in civil structures as they directly employ measured vibration signals but do not require exact knowledge of input loading nor the service interruption for manual inspection.
14p
viohoyo
25-04-2024
4
2
Download
-
The project develops an IoT system prototype that can reduce the risks of traffic accidents through a continuous monitoring of parameters during participation in traffic by vehicles. The system integrates sensors, including gas sensors (detection of alcohol concentration), vibration sensors (detection of accidents), and infrared sensors (detection of the seat belts). In case of any accident, the system can send warnings and location information to the relevant systems.
10p
vilarry
01-04-2024
7
1
Download
-
This paper introduces an innovative design for a laserbased apparatus employing diffractive beam sampling technology, with the primary purpose of characterizing vibration frequencies induced within large-scale bridges.
3p
vishekhar
01-11-2023
4
2
Download
-
The real-time monitoring of the position and speed of a moving object is crucial for safety compliance in industrial applications. The effectiveness of current sensing technology is limited by sensing distance and messy environments.
7p
viberbers
09-08-2023
3
3
Download
-
A biosensor is developed to monitor cardiac function to be used in e-health and clinical medicine (screening and diagnosis). The sensor uses a tri-axial accelerometer to record the ultra low-frequency vibrations of the heart.
7p
vidoctorstrange
06-05-2023
10
4
Download
-
The aim of the research was the processing of the vibration signatures from healthy and damaged composite beams acquired with the help of a Scanning Laser Vibrometer (SLV) upon excitation and analysis of the mode shapes acquired for damage detection. The displacement mode shapes acquired were then converted into curvature mode shapes with the help of a Central Difference Approximation method (CDA).
146p
runthenight07
01-03-2023
5
2
Download
-
Energy harvesting technology generating electrical energy from structural responses has been in the spotlight recently because of the development of self-powered autonomous wireless sensor systems. This study proposed and tested a high-sensitivity, high-durability, low-cost vibration power-generating device using a magnetostrictive element (Fe-Ga alloy) on a real-scale prestressed concrete girder to investigate its practical performance.
4p
viwilliamleiding
10-12-2021
11
1
Download
-
In this report, modal analysis of cracked beam with piezoelectric layer is carried out to investigate effect of crack and piezoelectric layer thickness on natural frequencies of the structure and output charge generated in the piezoelectric layer by vibration modes.
16p
inception36
30-11-2021
16
1
Download
-
Currently, with the disappearance of fossil energy sources, finding new alternative energy sources is very necessary such as: solar energy, wind energy, tidal energy, flow energy, ... However, these energy sources require high investment capital, large capacity, and bulky size. In circuits requiring small power sources (below 12V), it is not applicable, or only used through intermediate devices such as transformers, current transformers; Therefore, the application of energy from mechanical vibration has been proposed as an optimal measure compared to the above methods..
6p
trinhthamhodang9
04-12-2020
12
1
Download
-
A distinct pattern of phase differences was observed for each of the vibration models. The developed fuzzy logic module demonstrated successful recognition of the vibration frequencies, modes, orders, directions, and phase differences within 0.4 ms for the beam and shell mode vibrations
11p
minhxaminhyeu5
30-06-2019
11
0
Download
-
This paper presents a wavelet spectrum technique for monitoring a sudden crack of a beam-like bridge structure during earthquake excitation. When there is a sudden crack caused by earthquake excitation the stiffness of the structure is changed leading to a sudden change in natural frequencies during vibration.
16p
thienthanquydu
19-10-2018
39
0
Download
-
Wireless Sensor Networks (WSNs) can be defined as a self-configured and infrastructure-less wireless networks to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, motion or pollutants and to cooperatively pass their data through the network to a main location or sink where the data can be observed and analysed. A sink or base station acts likean interface between users and the network. One can retrieve required information from the network by injecting queries and gathering results from the sink.
319p
namde01
11-04-2013
128
21
Download
-
Existing sensor network architectures are based on the as- sumption that data will be polled. Therefore, they are not adequate for long-term battery-powered use in applications that must sense or react to events that occur at unpre- dictable times.
10p
giamdocamnhac
06-04-2013
46
6
Download
-
An alarm system is composed of three primary elements: sensors, controls and annunciation. Sensors consist of switches, motion detectors, sound or vibration detectors and other devices that are designed to “sense” the presence of an intruder, either the point of entry or when he moves within the residence Sensors can also take the form of buttons, that the occupant uses to activate a duress alarm. Controls consist of a panel and a keypad into which a code number that arms or disarms the system is entered.
0p
connhobinh
07-12-2012
49
2
Download
-
Before the days of mass literacy, medicine was more art than science, and people recognized a pharmacy by the four traditional colored bottles that represent earth, fire, air, and water. Medicine has come a long way since the days of the apothecary with its impressive collection of powders and bottles; drugs today are highly regulated and must comply with standards set by the U.S., Europe, Japan, and other countries. A drug must be shown to be efficacious and meet rigorous standards of purity, composition, and potency before being approved for use in the patient populatio...
400p
gian_anh
18-10-2012
49
11
Download
-
This comprehensivereference/text provides a thorough grounding in the fundamentals of rotating machinery vibration-treating computer model building, sources and types of vibration, and machine vibration signal analysis. Illustrating turbomachinery, vibration severity levels, condition monitoring,...
169p
ktcn_1
17-07-2012
79
17
Download
-
Tuyển tập các báo cáo nghiên cứu về hóa học được đăng trên tạp chí sinh học quốc tế đề tài : In vivo evaluation of a vibration analysis technique for the per-operative monitoring of the fixation of hip prostheses
10p
panasonic10
13-01-2012
40
2
Download
-
6 Process Monitoring and Control of Machining Operations 6.1 6.2 6.3 Robert G. Landers University of Missouri at Rolla Introduction Force/Torque/Power Generation Cutting Force Models • Force/Torque/Power Monitoring • Force/Torque/Power Control Forced Vibrations and Regenerative Chatter Regenerative Chatter Detection • Regenerative Chatter Suppression 6.4 6.5 6.6 Tool Condition Monitoring and Control Tool Failure • Tool Wear A. Galip Ulsoy University of Michigan Other Process Phenomena Burr Formation • Chip Formation • Cutting Temperature Generation Richard J.
19p
medinova
28-10-2010
92
15
Download
-
5 Machine Tool Monitoring and Control 5.1 5.2 5.3 Kourosh Danai University of Massachusetts, Amherst Introduction Process Monitoring Tool Wear Estimation • Tool Breakage Detection • Chatter Detection Process Control Control for Process Regulation • Control for Process Optimization 5.4 Conclusion 5.1 Introduction Machine tool monitoring and control are essential for automated manufacturing. Monitoring is necessary for detection of a process anomaly to prevent machine damage by stopping the process, or to remove the anomaly by adjusting the process inputs (feeds and speeds).
10p
medinova
28-10-2010
81
16
Download
CHỦ ĐỀ BẠN MUỐN TÌM
![](images/graphics/blank.gif)