Investigation of the relationship between cutting force and cutting tool wear with technological parameters when turning hardening without cooling SKD11 steel
7
lượt xem 3
download
lượt xem 3
download
Download
Vui lòng tải xuống để xem tài liệu đầy đủ
This paper presents the survey results of the relationship between the value of cutting force and the tool flank wear with the cutting parameters in dry turning SKD11 steel with a hardness above 54HRC. With the aim of surveying the change in cutting force and flank wear, each experiment was carried out with several successive cuts until the cutting tool was destroyed.
Chủ đề:
Bình luận(0) Đăng nhập để gửi bình luận!
CÓ THỂ BẠN MUỐN DOWNLOAD