Using Actionscript to Draw Lines Dynamically

Chia sẻ: Qweqwdasd Qweqdasda | Ngày: | Loại File: PDF | Số trang:4

Thêm vào BST

Báo xấu

57
lượt xem 7
download

Download Vui lòng tải xuống để xem tài liệu đầy đủ

Sử dụng Actionscript để Draw Lines động các Sử dụng ActionScript, bạn tự động có thể rút ra dòng trong một bộ phim vì nó đóng-một khả năng mà đi kèm với một số bản vẽ các phương pháp có sẵn cho các lớp Movie Clip. Sử dụng những phương pháp này vẽ

Chủ đề:

Bình luận(0) Đăng nhập để gửi bình luận!

Lưu

Nội dung Text: Using Actionscript to Draw Lines Dynamically

< Day Day Up > Using Actionscript to Draw Lines Dynamically Using ActionScript, you can dynamically draw lines in a movie as it plays—a capability that comes with a number of drawing methods available to the Movie Clip class. Using these drawing methods, you can: • Draw a line from the current drawing position to a point you specify • Move the current drawing position without drawing • Specify the line style for a timeline • Fill a shape with a color • Fill a shape with a gradient • Curve a line between two points • Clear a timeline of drawn lines and gradients In this section, we'll show you how to draw lines, move the drawing position, set the line style, and clear a movie clip instance. In the next section, we'll briefly touch on using flat and gradient fills. Although we won't cover the curveTo() method (which allows you to dynamically draw curved lines), you should understand enough about Flash drawing fundamentals by the end of the lesson that you'll be able to implement it in your own drawing applications. Using lineStyle() Before drawing any lines in a timeline, you must set the line style for that timeline. Flash uses this setting to determine line thickness, color, and alpha. Here's the syntax: path.lineStyle(thickness, color, alpha) thickness must be a value between 0 and 255 (with a thickness of 0 representing a hairline). color must be a hex color value. alpha represents the transparency level for a line, where 0 is transparent and 100 is opaque. Look at the following example: _root.myClip_mc.lineStyle(10, 0x009900, 100);
This line of ActionScript sets the line style in myClip_mc so that all lines drawn will be green and opaque, and have a thickness of 10. Using moveTo() All movie clip instances have a drawing position that indicates the coordinate at which a line would start—in other words, the beginning point of a line. (You use lineTo() to draw the line, as described in the next section.) When a movie clip instance is created, the drawing position is set as x = 0 and y = 0; however, you can move the drawing position at any time using moveTo(). When a line is drawn, the drawing position is updated to the endpoint of the drawn line. The following is the syntax for using moveTo(): path.moveTo(x, y); All you need to do is specify the x and y positions of your drawing position. For example: _root.myClip_mc.lineStyle(10,0x009900,100); _root.myClip_mc.moveTo(100,100); This ActionScript sets the line style and then moves the drawing position.
Using lineTo() The lineTo() drawing method of the Movie Clip class simply draws a line of the destination timeline's lineStyle format from the drawing position to the end position specified in the method. Following is the syntax for lineTo(): myClip_mc.lineTo(x,y); The x and y parameters specify the end point of the line to be drawn. NOTE After the line is drawn, the moveTo() position is updated to the end point of the line. The following example shows how you would use the methods we've described to draw a line:
_root.createEmptyMovieClip("canvas_mc",1); _root.canvas_mc.lineStyle(2,0x009900,100); _root.canvas_mc.moveTo(100,100); _root.canvas_mc.lineTo(200,150); This ActionScript draws a line between the points (100,100) and (200,150). < Day Day Up >