Configuring IP addresses

Module 7: Configuring TCP/IP addressing and name resolution. The following topics are covered in this module: Configuring IP addresses, configuring windows firewall, troubleshooting IP addresses, determining TCP/IP name resolution methods, configuring a DNS client and a WINS client, connecting to a remote host.

43p nomoney2 10-02-2017 45 4   Download

This course is intended for individuals who are employed as or seeking employment as a systems administrator or systems engineer. After completing this course, students will be able to: Allocate IP addressing by using DHCP, manage and monitor DHCP, resolve names, resolve host names by using DNS,...

13p nomoney2 10-02-2017 55 4   Download

Module 1: Allocating IP addressing by using dynamic host configuration protocol. This module provides you with the knowledge and skills to allocate IP addressing in a network environment. After completing this module, students will be able to: Describe the role of DHCP in the network infrastructure, add and authorize a DHCP Server service, configure a DHCP scope.

31p nomoney2 10-02-2017 51 5   Download

Module 2: Managing and monitoring dynamic host configuration protocol. This module provides you with the knowledge and skills to manage the DHCP service to reflect changing client IP addressing needs. It also provides you with the knowledge and skills to monitor DHCP server performance, because the DHCP environment is dynamic.

24p nomoney2 10-02-2017 48 4   Download

In this chapter we discuss our first client/server application program, Dynamic Host Configuration Protocol (DHCP). This application is discussed first because it is the first client/server application program that is used after a host is booted. In other words, it serves as a bootstrap when a host is booted and supposed to be connected to the Internet, but the host does not know its IP address.

11p tangtuy09 26-04-2016 75 2   Download

The following will be discussed in this chapter: Configure DHCP in an enterprise branch network, Configure NAT on a Cisco router, Configure new generation RIP (RIPng) to use IPv6. Every device that connects to a network needs an IP address. Network administrators assign static IP addresses to routers, servers, and other network devices whose locations (physical and logical) are not likely to change.

107p youcanletgo_01 04-01-2016 56 5   Download

Students will be able to: Describe IPv6, describe the basics of IPv6 addressing, describe and configure IPv6 addresses, describe and configure IPv6 routing, describe and configure IPv6 tunneling, describe and configure static and dynamic NAT -PT.

312p youcanletgo_01 29-12-2015 37 4   Download

This chapter describe the three primary options for enabling inter-VLAN routing, configure legacy inter-VLAN routing, configure router-on-a-stick inter-VLAN routing, troubleshoot common inter-VLAN configuration issues, troubleshoot common IP addressing issues in an inter-VLAN-routed environment, configure inter-VLAN routing using Layer 3 switching, troubleshoot inter-VLAN routing in a Layer 3-switched environment.

37p youcanletgo_01 29-12-2015 58 4   Download

Naming Methods: Overview Oracle Net provides five naming methods: Host naming: Enables users in a TCP/IP environment to resolve names through their existing name resolution service Local naming: Locates network addresses by using information configured and stored on each individual client's tnsnames.

24p trinh02 28-01-2013 72 5   Download

A border router configured to pass or reject packets based on information in the header of each individual packet can theoretically be configured to pass/reject based on any field but usually done based on: protocol type IP addres TCP/UDP port Fragment number Source routing information

25p muathu_102 28-01-2013 66 3   Download

Upon completing this lesson, you will be able to: Verify the default configuration of the device, given a functioning access layer switch Configure the switch management IP address and the default gateway, given a functioning access layer switch and an IP addressing scheme Execute an add, move, or change on an access layer switch, given a new network requirement

26p trinhvang 25-01-2013 49 5   Download

Upon completing this lesson, you will be able to: Use the CLI to interact with the Cisco IOS software, given an operational router Verify the default configuration of the device, given a functioning router Complete the initial device configuration, given a functioning router Configure IP addresses and IP subnet masks on router interfaces, given a functioning router

32p trinhvang 25-01-2013 50 5   Download

Inverse ARP is on by default Automatically maps the IP address of the devices at the other end of the PVCs to the local DLCI number. Split horizon is disabled by default on Frame Relay physical interfaces. Routes from Router R2 can be sent to Router R3, and vise-versa. Note: Inverse ARP does not provide dynamic mapping for the communication between routers R2 to R3 because they are not connected with a PVC; this must be configured (mapped) manually

93p phuc123456789 24-12-2012 76 12   Download

When installing a manually configured adapter, what information must you know to avoid resource conflicts? A. IRQ B. Number of bits C. Base I/O port address D. Base Memory address E. Operating System 2) Which IRQ is usually assigned for the primary IDE hard disk controller? A. 5 B. 7 C. 9 D. 14 E. 15 3) Which IRQ is assigned to the first serial port?

5p nguyenbeo86 24-11-2012 48 2   Download

Multiprotocol Label Switching Multiprotocol Label Switching (MPLS) is a standards-approved technology for speeding up network traffic flow and making it easier to manage. MPLS involves setting up a specific path for a given sequence of packets, identified by a label put in each packet, thus saving the time needed for a router to look up the address to the next node to forward the packet to. MPLS is called multiprotocol because it works with the Internet Protocol (IP), Asynchronous Transport Mode (ATM), and frame relay network protocols....

78p greenwind007 13-09-2012 153 43   Download

DNS is a distributed database used in TCP/IP networks to translate computer names (host names) to IP addresses. This lesson introduces you to DNS and name resolution. It also discusses the skills necessary and provides information to install and configure the DNS service.

4p duongnhatvnn 01-06-2011 80 6   Download

Every device that connects to a network needs an IP address. Network administrators assign static IP addresses to routers, servers, and other network devices whose locations (physical and logical) are not likely to change. Administrators enter static IP addresses manually when they configure devices to join the network. Static addresses also enable administrators to manage those devices remotely. However, computers in an organization often change locations, physically and logically.

55p 0984272663 25-04-2011 94 10   Download

Implementing IP Addressing Services. Objectives: Configure DHCP in an enterprise branch network, Configure NAT on a Cisco router, Configure new generation RIP (RIPng) to use IPv6. Every device that connects to a network needs an IP address. Network administrators assign static IP addresses to routers, servers, and other network devices whose locations (physical and logical) are not likely to change. Administrators enter static IP addresses manually when they configure devices to join the network. Static addresses also enable administrators to manage those devices remotely....

55p thanhtung_hk 05-11-2010 112 23   Download

Module 3: Configuring a Client IP Address Để thực hành module này học viên có thể tham khảo lab 1 module 2 phần network services để dựng DHCP server. Trong bài thực hành này xem như DHCP server đã có rồi (giảng viên đã dựng sẳn). Mỗi học viên một máy. Lab 1: Xin IP từ DHCP server, sử dụng lệnh IPCONFIG /RENEW (Xin ip từ DHCP), IPCONFIG /RELEASE (Xoá IP xin từ DHCP), IPCONFIG /ALL (Xem IP) 1. Xoá Ip tĩnh của PC. a. Click phải vào My Network Places chọn Properties b. Click phải vào card mạng cần xóa...

7p yukogaru1 29-07-2010 121 187   Download

Doing so includes changing the default administrative password, configuring the default gateway, configuring the IP addresses for the internal and external (and possibly other) interfaces,

16p chutieuchuathieulam 23-07-2010 75 6   Download