![](images/graphics/blank.gif)
Containment vessel
-
"Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel" covers double-normalized and tempered 9 % nickel steel plates intended particularly for welded pressure vessels for cryogenic service. Plates produced under this specification are subject to impact testing at −320°F [−195°C] or at such other temperatures as are agreed upon.
3p
hth_hn_vn
10-12-2023
5
5
Download
-
"Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum" covers chromium-molybdenum alloy steel plates intended primarily for welded boilers and pressure vessels designed for elevated temperature service. The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements.
6p
hth_hn_vn
10-12-2023
6
4
Download
-
This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction, covered by the latest revision of ASME B16.9, ASME B16.11, MSS SP-79, MSS SP-83, MSS SP-95, and MSS SP-97. Fittings differing from these ASME and MSS standards shall be furnished in accordance with Supplementary Requirement S58 of Specification A960/A960M. These fittings are for use in pressure piping and pressure vessel service at low temperatures.
6p
hth_hn_vn
10-12-2023
4
4
Download
-
This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.
8p
hth_hn_vn
10-12-2023
7
5
Download
-
"Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts" covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associated equipment. Forgings made of steel grades listed in Specification A335/A335M, may also be ordered under this specification. The chemical, tensile, heat treatment, and marking requirements of Specification A335/A335M shall apply, except the forging shall conform to the chemical requirements of Tables 1 and 2 of Specification A335/A335M only with respect to heat analysis.
8p
hth_hn_vn
10-12-2023
12
5
Download
-
This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important.
4p
hth_hn_vn
10-12-2023
7
4
Download
-
This specification covers 8 and 9 % nickel-alloy steel forged or rolled flanges, fittings, valves, and parts intended for use in welded pressure vessels for low-temperature service. The specification is applicable to forgings with maximum section thickness of 3 in. [75 mm] in the double normalized and tempered condition and 5 in. [125 mm] in the quenched and tempered condition. Forgings under this specification are intended for service at operating temperatures not lower than −320 °F [−196 °C] for Type I or −275 °F [−170 °C] for Type II or higher than 250 °F [121 °C].
4p
hth_hn_vn
10-12-2023
8
3
Download
-
This specification covers one type of manganese-molybdenum and four types of manganese-molybdenumnickel alloy steel plates for use in the quenched and tempered condition for the construction of welded pressure vessels.
3p
hth_hn_vn
10-12-2023
7
6
Download
-
This specification2 covers nickel-chromiummolybdenum alloy steel plates for use in the quenched and tempered condition, intended for the fabrication of welded pressure vessels and other pressure equipment. These alloy compositions are normally considered for construction involving plate thicknesses of 2 in. [50 mm] or greater.
3p
hth_hn_vn
10-12-2023
7
5
Download
-
This specification2 covers 7, 8, and 9 nickel alloy steel plates for use in the water quenched and tempered condition intended for the fabrication of welded pressure vessels.
4p
hth_hn_vn
10-12-2023
7
5
Download
-
This specificationcovers heat-treated carbonmanganese-silicon steel plates intended for fusion welded pressure vessels and structures. The maximum thickness of plates furnished under this specification is 4 in. [100 mm] for Class 1 and 6 in. [150 mm] for Class 2 and Class 3.
4p
hth_hn_vn
10-12-2023
7
4
Download
-
This specification2 covers two types of Cr-1 Mo and three types of Cr-Mo-V alloy steel plates for use in the quenched-and-tempered condition, intended for the fabrication of welded pressure vessels and components.
5p
hth_hn_vn
10-12-2023
5
4
Download
-
This specification2 covers the procedure and acceptance standards for straight-beam, pulse-echo, ultrasonic examination of rolled carbon and alloy steel plates, [10 mm] in thickness and over, for special applications. The method will detect internal discontinuities parallel to the rolled surfaces. Three levels of acceptance standards are provided. Supplementary requirements are provided for alternative procedures.
5p
hth_hn_vn
10-12-2023
5
3
Download
-
This specification covers three grades of carbonmanganese-silicon steel plates intended primarily for service in welded pressure vessels where improved low temperature notch toughness is important.
3p
hth_hn_vn
10-12-2023
5
5
Download
-
This specification covers statically cast dual metal rolls with the outer layer of the roll body being chilled white iron of different chemical composition than the core and journals of the roll which is gray cast iron. The castings are suitable for pressure containing parts, the design strength of which is based on the gray iron portion of the cylinder.
2p
hth_hn_vn
10-12-2023
9
4
Download
-
This specification covers high-strength quenched and tempered alloy steel plates intended for use in fusion welded pressure vessels. Plates furnished under this specification are available in three classes having different strength levels.
3p
hth_hn_vn
10-12-2023
10
5
Download
-
This specification covers chromium-molybdenumvanadium alloy steel plates intended primarily for the fabrication of welded pressure vessels. The plates furnished under this specification are required to be normalized-and-tempered. Specification A542/ A542M includes coverage of the material in the quenched-andtempered condition.
4p
hth_hn_vn
10-12-2023
8
5
Download
-
This specification covers nonstandard as-forged fittings, valve components, and parts for glass-lined piping and pressure vessel service. Mechanical properties are certified on the basis of test material subjected to heat treatments to simulate glass-coating operations.
3p
hth_hn_vn
10-12-2023
7
4
Download
-
Continued part 1, part 2 of ebook "Recent advances in structural integrity analysis: Proceedings of the International Congress (APCF/SIF-2014)" presents the following content: natural frequency analysis of rat whiskers; evaluation of mechanical properties of porcine sclera; temperature effect on strength of aluminum based high thermal conductive composites containing VGCF-CNT filler; low temperature stress estimation of fiber reinforced material; stress corrosion cracking of sensitized stainless steel type 304 in high-temperature, high-purity water environment;...
305p
dieptieuung
17-07-2023
5
4
Download
-
This study aims to evaluate the potential for “Containment Bypass” in VVER-1000/V-320 reactor during extended Station Blackout (SBO) scenarios that challenge the tubes by primarily involving a natural circulation of superheated steam inside the piping loop and then induce creep rupture tube failure.
8p
visnape
30-01-2023
9
4
Download