Electrical properties

This study aims to contribute to the development of a GaN/Ga2O3 diode that can be utilized in high-power device applications. The simulated device is calibrated against experimental GaN and Ga2O3 diodes, considering the effect of thickness of GaN layer and its doping concentration on the performance of GaN/Ga2O3 diodes. The band structures of devices are investigated to revial which factors that affect the properties of GaN/Ga2O3 diode.

6p viling 11-10-2024 1 0   Download

The article presents some results of investigating the effective adsorption ratio of base oil SN 100 on silica gel, determination of physico-chemical, electrical properties, and voltage stability of the oil fraction which is separated from base oil SN 100 by adsorption method on silica gel with the appropriate ratio of silica gel/base oil SN 100 = 140/100.

5p vikwong 29-09-2024 2 1   Download

This study aims to investigate the effectiveness of the green microwave technique in producing 1T/2H-MoS2 nanomaterials using polyol solvents. The paper presents a thorough analysis of the structural and property characteristics of the synthesized materials and elucidates the underlying chemical mechanism that governs the formation of hybrid-phase nanostructures. Additionally, the role of polyol solvents in the practical synthesis of nano MoS2 under microwave heating is evaluated and explained.

15p xuanphongdacy06 18-09-2024 1 1   Download

Lead-free (Na0.59K0.41)(Nb1-xSbx)O3 ceramic (x = 0 ÷ 0.12) were prepared by the solid phase reaction method. This study aimed to address the need for practical applications by examining the impact of (K0.41Na0.59)NbO3 lead-free.

8p viritesh 02-04-2024 7 3   Download

This dissertation aims to investigate the electrical impedance properties of fruits and vegetables, and explore the relationship between impedance and quality criteria. In particular, the present dissertation outlines experimental research conducted on relationships between impedance properties and fruit tastes as well as the impedance changes observed during ripening process. Impedance measurement to monitor moisture content changes in the progress of drying is also included in this research.

116p runthenight05 01-03-2023 7 3   Download

Lithium (Li) is the lightest metal, has unique physicochemical properties and is the main component of lithium-ion batteries. Rechargeable lithium-ion batteries play a very important role in maximizing the performance of electric devices and vehicles. It is predicted that the metal and mineral demand for lithium-ion batteries will increase 56 times by 2050. In order to meet the increasing demand, in addition to known methods, lithium recovery from geothermal waters has become a very popular research subject.

13p tanmocphong 29-01-2022 24 2   Download

Purpose: The purpose of thesis is to study the influence of temperature, pressure and dopant on the diffusion coefficient and ionic conductivity of the bulk material as CeO2, c-ZrO2, YDC and YSZ. For YDC and YSZ thin films, we find the thickness dependence of the lattice constant, diffusion coefficient and ionic conductivity

28p tunelove 10-06-2021 11 2   Download

The aim of this thesis is to study electrical transport characteristics of graphene nanostructures. We focus on two research objects associated with two kinds of graphene nanostructures: graphene bipolar junctions (GBJs) and graphene quantum dots (GQDs).

27p extraenglish 24-05-2021 20 4   Download

The aim of this thesis is to study electrical transport characteristics of graphene nanostructures. We focus on two research objects associated with two kinds of graphene nanostructures: graphene bipolar junctions (GBJs) and graphene quantum dots (GQDs).

27p capheviahe26 25-01-2021 20 3   Download

Semiconductors nanoparticles have quantum size effects and non-linear optical characteristics as well as high quantum efficiency, making them next-generation materials that can be applied in various optoelectronic devices. Semiconductor nanoparticles have attracted much attention because of their novel electric and optical properties originating from surface and quantum confinement effects.

5p tamynhan5 10-12-2020 14 2   Download

We report on an environmentally friendly and versatile chemical solution deposition route to K0.5Na0.5NbO3 (KNN) thin films. The excess amounts of K and Na in KNN precursor solutions was found to be strong influence on perovskite KNN single-phase thin films. It was revealed from Raman spectroscopic analysis data that a change in scattering mode was observed for the KNN thin films fabricated under various processing conditions.

8p tamynhan6 14-09-2020 42 5   Download

Bài giảng "Vật liệu học - Chương 6: Electrical properties" cung cấp cho người học các kiến thức về Ohm’s law, energy levels of an isolated atom, conduction & electron transport, charge carriers in insulators and semiconductors, energy bands, the mass action law,... Mời các bạn cùng tham khảo.

84p koxih_kothogmih3 23-08-2020 58 5   Download

Main points of thesis: Fabrication of the carbon nanotube based internal combustion engine oils; measurement, characterization of CNTs-based oils regarding their structures, physical, thermal, and electrical properties; heat dissipation modeling and thermal-conductivity computation of the carbon nanotube based internal combustion engine oils, and comparison with the experimental results.

23p xacxuoc4321 09-07-2019 26 4   Download

The goads of this thesis: Successfully fabricated ceramic piezoelectric samples (Ba1-xCax) TiO3 (BCT) and BZT-BCT by solid phase synthesis method. BZTBCT materials must be good quality, high piezoelectric coefficient (500-600 pC / N). Studying the relationship between morphological competition and dielectric ferroelectric properties, especially with the high piezoelectric properties of materials.

26p xacxuoc4321 09-07-2019 52 7   Download

The purpose of the thesis: Understanding and building manufacturing technology for positive material, which has the ability to exchange and storage of Li+ , Na+ on manganese oxide substrate. Investigating the variation of electrical and electrochemical properties of material systems dependent on technological factors. Therefore, determining the suitable technology for making conductor material and charge/discharge Li+ , Na+ ion with high capacity, energy density, and structural stability.

27p xacxuoc4321 09-07-2019 43 4   Download

Results of elemental composition analysis shown that the contents of C, H, N, Cl, S are ranged from 35,00 to 51,96, from 6,01 to 6,23, from 0,41 to 0,88, from 0,44 to 0,56, from 0,14 to 0,84 %, respectively. On this basis, the author have proposed a waste-toenergy plant with capacity of 250 tons of waste/day to generate the electricity with capacity of 17,0 MW/day.

8p cumeo3000 01-08-2018 27 1   Download

(BQ) In the study, temperature measurements have been made for Ti–6Al–4V workpieces with various duty factors to clarify the essential causes of difficulty in machining titanium alloys and observe the optimal duty factor in terms of productivity and quality.

7p xuanphuongdhts 27-03-2017 48 3   Download

The theoretical analysis of MTSM has been developed to model and simulate the signature of the sensor responses at harmonic frequencies. The signatures of the evaporation- induced deposition processes were investigated by studying the effect of the thickness and stiffness of the medium.

13p bautroibinhyen17 13-02-2017 46 3   Download

The objective of the research is to assess the reinforcement possibility of CNT in the rubber substrate and blend rubber in order to create rubber nanocomposite materials with a high mechanical properties, sustainability in the solvent, and suitable electrical conductivity.

28p change04 08-06-2016 44 4   Download

The mechanical and electrical properties of polymer composite materials based on bamboo wafer reinforced phenol formaldehyde resin have been studied. The tensile, flexural and impact strengths of composite materials have been decreased significantly when using the short bamboo fibre instead of the bamboo wafer.

6p uocvong02 24-09-2015 63 9   Download