English for mechanical engineering

This study explores students' perceptions of the writing assignments in the English for Occupational Purposes (EOP) program in general and English for Mechanical Engineering (EME) in particular. It focuses on their evaluation of the assignments' effectiveness in enhancing writing skills.

6p viyuhi 26-03-2025 0 0   Download

This work demonstrated the potential of US for mitigating membrane fouling. However, the integration of the US transducers within the membrane system will be a major challenge for the application of US in membrane cleaning. It is more appropriate that US is used as pre-treatment to the membrane system, the transducers can be placed prior to the coagulant feed line. Further work on the determination of the detailed mechanisms associated with enhancing coagulation would enable optimisation of the system with regard to process, cost and energy efficiency.

108p runthenight05 01-03-2023 18 3   Download

In this thesis, a numerical model with detailed reaction mechanism which is tailored for studying the behaviour of combustion of natural gas has been introduced and validated with available experimental data. The numerical model attempts to comprehensively simulate the physical conditions (temperature and pressure), equivalent ratio, and fuel dilution and strain rate effect in the laminar flames.

158p runthenight05 01-03-2023 25 3   Download

The aim of this Master of Engineering (MEng) - Aerospace thesis is to study the structural response and failure of aerospace grade composites during exposure to fire. Key aspects of the research are to analyse the thermal and mechanical responses of laminates and sandwich composites in high temperature and fire environments, which result in softening and structural failure. The research is concentrated on carbon/epoxy laminates and sandwich composites, which are the most common composite materials used in aerospace structures.

209p runthenight05 01-03-2023 11 3   Download

3D animation software is extensively used to create graphics for special effects sequences in live-action films, in animated feature film production and for the generation of computer games and virtual reality content. It is a commonly held view within the computer graphics community that 3D animation software is ―just another tool‖ for self-expression. This research questions that view by examining the inherent nature of the tool itself. In doing so, some of the philosophical assumptions embedded in the design of the new digital tool are revealed.

99p runthenight05 01-03-2023 15 2   Download

The limits of current micro-scale technology is approaching rapidly. As the technology is going toward nano-scale devices, physical phenomena involved are fundamentally different from micro-scale ones. Principles in classical physics are no longer powerful enough to explicate the phenomena involved in nano-scale devices. At this stage, quantum mechanic sheds some light on those topics which cannot be described by classical physics. The primary focus of this research work is the development of an analysis technique for understanding the behavior of strongly perturbed harmonic oscillators.

165p runthenight07 01-03-2023 9 3   Download

This research focuses on Fibre Cement Felts (FCF), which is a non-woven textile substrate acting as a conveyor belt for the manufacturing of Fibre Cement Sheets (FCS). Fibre Cement Felts are a valued component required in the manufacturing process of Fibre Cement Sheets, used in construction for today’s building industry. Identifying the key factors that most influence FCF will assist in understanding of the relationship between fibre diameters, carded web, and mechanical bonding.

137p runthenight07 01-03-2023 11 3   Download

One of the limitations of the BDI (Belief-Desire-Intention) model is the lack of any explicit mechanisms within the architecture to be able to learn. In particular, BDI agents do not possess the ability to adapt based on past experience. This is important in dynamic environments as they can change, causing previously successful methods for achieving goals to become inefficient or ineffective.

108p runthenight07 01-03-2023 17 3   Download

This research is built upon the determination of the Eigenpairs of one and two dimensional positive differential operators with periodic boundary conditions. The Schrödinger equation was solved for positive operators in both one and two dimensions. Fourier series were used to express the derivatives as the summation of Fourier terms. This led to a novel approach for the calculation of the eigenmodels of a perturbed potential well. The perturbation can be done via an electric field applied to the potential well.

88p runthenight07 01-03-2023 8 3   Download

The main aim of this study is to investigate utilising root-like architectures to improve the interfacial strength of pin-integrated hybrid composite-metal structures. Joints are critical elements in aircraft structures and require special consideration due to their vital role in the structural integrity of airframes. Although bonded and bolted systems are used commonly in engineering applications, pinning technologies have shown tremendous potential for hybrid joints.

198p runthenight04 02-02-2023 8 2   Download

The specific research objectives of this study are: 1. The development of a high throughput method for evaluation of alloys (5xxx Al as model materials in this work) subject to pitting; 2. Understanding the roles of variation in functional groups' in determining the inhibition efficiency; 3. Elucidating the inhibition mechanisms; and 4. Unveiling the role of intermetallic present in Al matrix and their contribution to the inhibition mechanism, particularly the long-term durability of the inhibitor systems.

104p runthenight04 02-02-2023 14 2   Download

In this thesis, the limitations of using existing LTE congestion mitigation mechanisms such as Discard Timer and RED have been explored. A different mechanism to analyse the effects of using control theory for congestion mitigation has been developed. Finally, congestion mitigation in LTE networks has been addresses using radio resource allocation techniques with non-cooperative game theory being an underlying mathematical framework.

118p runthenight04 02-02-2023 9 2   Download

One of the main objectives for this thesis is to provide an extensive literature review on the knowledge of the failure of trees in general and specifically Eucalyptus. By doing so, gaps in the literature and research will be revealed and then the remaining objectives will be selected experimental work filling the gaps for Eucalypts.

103p runthenight04 02-02-2023 5 2   Download

The aim of this Masters of Engineering (MEng) - Aerospace thesis was to investigate the durability of Piezoelectric Wafer Active Sensors (PWAS) for the health monitoring of composite structures. One significant challenge faced by the aviation industry is the cost and time associated with maintaining aircrafts, in particular, aging airliners. Structural Health Monitoring (SHM) is a possible approach to reduce the high cost of inspection and maintenance.

164p runthenight04 02-02-2023 15 2   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. Additively manufactured TPU mould is developed to cast complex concrete structures. A planar topologically optimized cantilever and a free-form 3D column are cast using the proposed TPU mould. Good surface quality is obtained for the cast concrete elements, and the moulds can be reused many times after cleaning.

98p runthenight04 02-02-2023 11 4   Download

The nasal route for drug administration has the potential for local and systemic delivery of a wide variety of therapeutics. Nasal spray drug delivery has the potential to administer drugs to the bloodstream, avoiding the use of painful needles. While there is great potential, studies in the area are limited and somewhat conflicting. This study aimed to support the improvement of nasal drug delivery through experimental work on a model nasal cavity and through experimental characterisation of nasal spray behaviour. Four different brands of nasal spray were investigated.

91p runthenight04 02-02-2023 13 3   Download

The recent advances in the study of the unique capabilities of monolayer crystals had predicted piezoelectricity in two-dimensional (2D) group IV chalcogenides which are not present in their bulk forms. In this study, the predicted piezoelectric properties of was experimentally explored through Piezoelectric Force Microscopy (PFM). Tin Sulfide (SnS), Tin Selenide (SnSe), Germanium Sulfide (GeS), were exfoliated from their bulk forms by the top down methods of liquid sonication, while and Tin Disulfide (SnS2) mechanically exfoliated by tape.

82p runthenight04 02-02-2023 11 3   Download

The aim of this project was to design, fabricate and characterise multifunctional structural composites incorporating phase change materials for thermal management applications. The specific research objectives to achieve this goal were formulated as follows: Investigate effective methods to integrate microencapsulated PCMs into glass fibrereinforced epoxy composites; Evaluate the mechanical properties of micro-PCMs enhanced FRP composites and investigate associated failure mechanisms; Study the thermal management effectiveness of micro-PCMs enhanced FRP composites.

125p runthenight04 02-02-2023 13 3   Download

The thesis consists of five chapters which aim to investigate the mechanical properties and fabricating processes of different biomedical Ti scaffolds, with the structure presented: Chapter 1 is a generalized introduction to the content of the thesis, including the background, scopes and objectives of the research. In Chapter 2, a comprehensive literature review is presented. Chapter 3 presents the design and fabrication of the Ti scaffolds. In Chapter 4, the mechanical properties of the fabricated Ti scaffolds were analyzed.

109p runthenight04 02-02-2023 11 4   Download

Once the mechanical properties of printed TPU are characterised, a novel, low cost, and environmentally friendly method for concrete casting using printed TPU moulds is proposed in this thesis. The findings of this thesis will provide clear guidelines for the selection of processing parameters for additively manufactured TPU parts and the method of casting complicated concrete structures with additively manufactured TPU mould.

98p runordie3 06-07-2022 16 3   Download