Experimental system

This paper is structured as follows. The following section presents related work. Section 3 summarizes the characteristics of the two datasets utilized in the model and the system’s overall architecture for image-based disease diagnosis. Section 4 provides our experimental results that compare the performance metrics with other studies.

6p viengfa 28-10-2024 2 2   Download

Recently, the application of textile-reinforced concrete (TRC) in thin-walled precast structures has gained significant attention. Among these innovations, the combination of TRC and reinforced concrete (RC) has emerged as an effective method for creating hybrid structural systems. This paper presents the experimental results analyzing the shear behavior of a hybrid deck slab structure consisting of TRC stay-in-place (SiP) formwork and RC components.

10p vibecca 01-10-2024 3 0   Download

In this study, the influence of injector structure and fuel injection pressure on injection mass as well as the influence of injection pressure on the development of the fuel spray are presented.

14p vibecca 01-10-2024 1 0   Download

The study was conducted from October 2016 to December 2017 at the Experimental Farm, Faculty of Animal Science, Vietnam National University of Agriculture, with the aim to evaluate the interaction between farming model types and reproductive performance of Ho and Dong Tao chickens.

9p vibecca 01-10-2024 3 2   Download

The article has focused on performing the experimental measurement of the thermal difference between two coating materials. The result will also be applied to evaluate and select the effective thermal paint for the protected system.

12p viyoko 01-10-2024 2 1   Download

This study proposes therefore to apply the transmissibility functions for modal identification of ambient vibration testing and investigates its performance in presence of harmonics. Numerical examples and an experimental test are used for illustration and validation.

14p vifilm 24-09-2024 7 1   Download

The elasto-plastic characteristics of plain concrete are inevitably affected by the loading rate. This paper presents an experimental investigation on the effect of loading rate on flexural behavior of concrete and reinforced concrete (RC) beams, which was carried out with Walter+bai electro-hydraulic servo system.

8p vifilm 24-09-2024 1 1   Download

The susceptibility of the diagonal member of the Concentrically Braced Frames (CBFs) to buckling reduces the energy-dissipating capacity of the CBFs. Despite of high ultimate strength and stiffness of the CBFs as considerable advantages, its shortcoming (low dissipating energy capacity) is accounted as an important dilemma for this system.

11p vifaye 20-09-2024 2 1   Download

This paper aims to contribute to a better understanding of the shear behavior of reinforced concrete beams with openings in the shear span, strengthened with Carbon fiber-reinforced polymer (CFRP) sheets.

11p vifaye 20-09-2024 1 1   Download

Magnetic bearing systems have received much attention in the research community for the past decades. Its inherent nonlinearity and open-loop instability present challenges for controller design. This thesis investigates and designs model predictive control (MPC) systems for an experimental Active Magnetic Bearing (AMB) laboratory system. A host-target development environment of real-time control system with hardware in the loop (HIL) is used for implementation of the predictive control systems. In this thesis, both continuous and discrete time model predictive controllers are studied.

172p runthenight05 01-03-2023 9 3   Download

The aim of this Master of Engineering (MEng) - Aerospace thesis is to study the structural response and failure of aerospace grade composites during exposure to fire. Key aspects of the research are to analyse the thermal and mechanical responses of laminates and sandwich composites in high temperature and fire environments, which result in softening and structural failure. The research is concentrated on carbon/epoxy laminates and sandwich composites, which are the most common composite materials used in aerospace structures.

209p runthenight05 01-03-2023 7 3   Download

The thesis is structured as follows: Chapter 1 Introduction; Chapter 2 Literature Review; Chapter 3 Experimental Design, Development and Application of an Accelerated Drill Test; Chapter 4 Discussion: The Developed Accelerated Drill Test; Chapter 5 Conclusions and Recommendations for Further Work; Appendix A – VMC Setup and Programming for Drill Testing; Appendix B - Designing an Automated Drill Test and DAQ System for Spindle Current Collection.

172p runthenight07 01-03-2023 7 3   Download

The primary goal of this research is accomplishing the BUUAS that can realize functions in the mission profile. In order to achieve this, the project starts with developing elemental aspects of the BUUAS. The configuration and propulsion system are two basic elements that the BUUAS must have to realize successfully operation. Besides, the necessary transition process between water and air must be investigated and carried by a conceived system.

187p runthenight04 02-02-2023 5 2   Download

The primary aim of this research was to further develop the sensing and estimation module of the CHMS framework with an improved multimodal inference model of MWL as needed for the application in aerospace CPHS. Here the focus of this research was on the implementation of a multimodal inference model of MWL that would be developed and experimentally tested. This was done with the purpose of studying the viability of real‐time system adaptation in aerospace systems.

283p runthenight04 02-02-2023 9 3   Download

The following boundaries are considered in pursuing the proposed research study: This study is conducted on an experimental basis; Domestic hot water supply using evacuated tube solar thermal collectors has been selected as the applied context for this study; Paraffin has been chosen to be used as a PCM for this study due to its attractive techno-economic properties for use with solar thermal systems in domestic hot water applications; The effect of scale factor is not studied; The effect of the shape of the PCM container is not investigated in this study.

102p runthenight04 02-02-2023 4 2   Download

The nasal route for drug administration has the potential for local and systemic delivery of a wide variety of therapeutics. Nasal spray drug delivery has the potential to administer drugs to the bloodstream, avoiding the use of painful needles. While there is great potential, studies in the area are limited and somewhat conflicting. This study aimed to support the improvement of nasal drug delivery through experimental work on a model nasal cavity and through experimental characterisation of nasal spray behaviour. Four different brands of nasal spray were investigated.

91p runthenight04 02-02-2023 7 3   Download

The purpose of this research was to investigate the technological feasibility of biological filtration process for Mn control in Lorne WTP. This thesis consists of eight chapters. Project background and research objectives are described in Chapter 1. Chapter 2 presents an extensive literature review covering the nature of manganese, manganese analytical methods, manganese control methods, the nature of MOB and biological control of Mn in drinking water treatment. The materials and methods used throughout the experimental investigation for this study are described in Chapter 3.

119p runthenight04 02-02-2023 6 3   Download

The nasal route for drug administration has the potential for local and systemic delivery of a wide variety of therapeutics. Nasal spray drug delivery has the potential to administer drugs to the bloodstream, avoiding the use of painful needles. While there is great potential, studies in the area are limited and somewhat conflicting. The thesis "Experimental Studies in Aid of Improving Nasal Drug Delivery" aimed to support the improvement of nasal drug delivery through experimental work on a model nasal cavity and through experimental characterisation of nasal spray behaviour.

91p runordie3 06-07-2022 5 3   Download

To demonstrate the practicality of two proposed model, research works are focused on as follows: O-Marketplace Model, after analyzing the limitations of existing cloud service delivery methods, a multi-cloud service delivery method is proposed to overcome these limitations, and a promising multi-cloud marketplace model is built up; Composable Application Model, we first build up its concept and its description method, then the experimentation is conducted by transform into TOSCA specification to evaluate the feasibility of the proposed multi-cloud application model.

130p viabigailjohnson 10-06-2022 14 3   Download

The thesis is performed theoretically and experimentally. The theoretical studies on the dynamics of the single short pulse emission using transient cavity method and narrow linewidth and tunable wavelength generation using Littrow grating configuration were performed. On the other hand, the experimental investigations were carried out Experimental research was carried out based on the optimal results obtained by the theoretical studies.

27p beloveinhouse01 15-08-2021 26 4   Download