Investigation of microstructure

Is a branch of polymer science dealing with analysis and characterisation of polymers. üThe complication of macromolecular chains, the dispersion in molecular weight, tacticity, crystallinity, orientation, composition of polymers etc. and complex morphological systems ⇒ analysis of polymer ≠ the small organic materials ⇒ Focus on viscoelastic properties, dynamic mechanical testing.

114p buitiendung87 06-01-2011 345 154   Download

The microstructure of the oxide layer and the density distribution of the phases in the volume of the film in two positions of the cathode — stationary and during its rotation — were investigated.

7p lucastanguyen 01-06-2020 15 2   Download

For this study, different volume fraction (vol.%) of particulate alumina (Al2O3) reinforced aluminium alloy (Al 6061) with 5 vol.%, 15 vol.% and 25 vol.% are produced by powder metallurgy method. These samples were subjected to biaxial stresses in order to investigate the behaviour of the metal matrix composites (MMCs). Microstructure analysis on the individual sample before and after loading was performed under scanning electron microscopy. The small particles of 2 µm in size have exhibited strong interfacial bonding with the matrix.

15p 12120609 01-06-2020 12 1   Download

In this paper, a feasibility study concerning the generation of tensile specimens using a quenching dilatometer is presented. The ODS steel investigated contains 9%Cr and exhibits a phase transformation between ferrite and austenite around 870 °C.

8p christabelhuynh 30-05-2020 34 2   Download

In this study, we investigated the microstructure of such doped fuels as well as a reference standard UO2 by positron annihilation spectroscopy (PAS). Although this technique is particularly sensitive to lattice point defects in materials, a wider application in the UO2 research is still missing.

5p christabelhuynh 30-05-2020 6 1   Download

Aluminium alloy AlMg4.5Mn has got comprehensive acceptance in the manufacturing of light weight frames, marine structures which require high strength and worthy corrosion revulsion. The present investigation work focuses on friction stir welding process in which influences of operating parameters have been studied on friction stir welded butt joints.

10p tohitohi 19-05-2020 38 2   Download

In this study, the effect of angle and length of copper made slope plate on the microstructure of A360-Aluminum alloy is investigated. Microstructure study of metallographic samples in different conditions revealed that for 400mm slope length and 60° slope angle the optimum sphierized and homogenized microstructure is achieved.

6p tohitohi 19-05-2020 14 1   Download

In this paper, butt joining of Al5083 to commercially pure copper is investigated by friction stir welding method. The effects of transverse welding speed of the tool on the mechanical properties and microstructure of the joint were studied, experimentally.

8p tohitohi 19-05-2020 15 2   Download