![](images/graphics/blank.gif)
ITO material
-
Antimony telluride (Sb2Te3) thin films were deposited on to non-and conductive-glass substrates ‒ borosilicate (BRS), indium-doped tin oxide (ITO), and fluorine-doped tin oxide (FTO) using the doctorblading technique as a white slurry precipitated from the solution during a chemical bath reaction.
9p
viberbers
09-08-2023
7
3
Download
-
Highly conductive PEDOT:PSS is one of the most promising materials for indium tin oxide (ITO) substitution in printed electronics. Here, we report the development and optimisation of two PEDOT:PSS ink formulations for the fabrication of inkjet-printed transparent conductive layers.
10p
viberbers
09-08-2023
4
3
Download
-
A portable and simple Raman scattering and photoluminescence spectroscopy system was set up for sensitive and rapid determination of nitrate/nitrite at low concentrations in water samples. The SERS (Surface Enhanced Raman Scattering) e active Ag/ITO substrates were prepared and employed to obtain the enhanced Raman scattering light from the sample.
6p
viberbers
09-08-2023
3
3
Download
-
In the present investigation, GNS have been prepared by an aqueous anodic exfoliation of pencil graphite in an acidic medium at different dc voltages (5 Ve12 V). The GNS prepared at optimum voltage were mixed with polyaniline (PANI) polymer and drop casted on an indium tin oxide (ITO)/Polyethylene terephthalate (PET) substrate to study the I-V characteristics and to measure the band gap of composites.
7p
viberbers
09-08-2023
4
3
Download
-
In this article, we propose an ultralow loss and small-size ITO microheater for the phase shift tuning. The designated microheater is manipulated to realize a numerical design of a compact and high bandwidth three-mode selective router.
11p
viannee
02-08-2023
7
4
Download
-
In this paper, we report on the synthesis of solid polymer electrolytes (SPEs) on the basis of 95 wt.% PEO and 5 wt. of anhydrous cobalt (II) chloride hexahydrate (CoCl2 6H2O), hereafter called PCL5, by the spin-coating technique using different types of glass (normal, quartz, ITO) substrates. The PCL5 electrolyte exhibits the highest conductivity and the lowest optical bandgap and hence, it was selected as a component to fabricate the organic single-layer device.
8p
larachdumlanat129
14-01-2021
9
1
Download
-
A novel concept of NAND memory array has been proposed by using only ferroelectricgate thin film transistors (FGTs), whose structure is constructed from a sol-gel ITO channel and a sol-gel stacked ferroelectric between Bi3.25La0.75Ti3O12 and PbZr0.52TiO0.48O3 (BLT/PZT) gate insulator.
7p
viposeidon2711
17-09-2019
12
0
Download