Nuclear Power Engineering

Xem 1-20 trên 107 kết quả Nuclear Power Engineering
  • Design Philosophies: Radiological release to the environment is prevented by maintaining R/B pressure negative(-63Pa). Radioactive substance in PCV are removed and captured in the filter device.R/B Closed Cooling Water System (RCW) / Reactor Service Water System (RSW) How are the many Heat exchangers cooled down?

    pdf33p giotletinh_hd2009 14-10-2013 69 4   Download

  • In the design criterion for the nuclear power plant piping system, the limit state of the piping against an earthquake is assumed to be plastic collapse. The failure of a common piping system, however, means the leakage caused by the cracks. Therefore, for the seismic fragility analysis of a nuclear power plant, a method capable of quantitatively expressing the failure of an actual piping system is required.

    pdf12p minhxaminhyeu3 12-06-2019 6 0   Download

  • An improved principal component analysis (PCA) method is applied for sensor fault detection and isolation (FDI) in a nuclear power plant (NPP) in this paper. Data pre-processing and false alarm reducing methods are combined with general PCA method to improve the model performance in practice. In data pre-processing, singular points and random fluctuations in the original data are eliminated with various techniques respectively. In fault detecting, a statistics-based method is proposed to reduce the false alarms of T2 and Q statistics.

    pdf9p minhxaminhyeu3 12-06-2019 7 0   Download

  • The failure of steam generators (SGs) due to corrosion is one of the most important problems in power plants. Impurities usually accumulate in the hot sides of SG and form deposits on the SG surfaces. In this paper, the sensitivity analysis of the accumulation of water impurities in the heat exchangers of nuclear power plants is presented.

    pdf8p minhxaminhyeu3 12-06-2019 3 0   Download

  • A high energy arcing fault event occurred in the medium-voltage (13.8 kV and 4.16 kV) metalclad switchgears in a nuclear power plant not only affecting switchgear but also connected equipment due to the arc energy. The high energy arcing fault also causes a fire that influences the safety function of the unit. Therefore, from the safety point of view, it is necessary to evaluate the influences of high energy arcing fault events on the safety functions of nuclear power plants.

    pdf8p minhxaminhyeu3 12-06-2019 4 0   Download

  • To assess the availability of a nuclear power plant’s dynamic systems, it is necessary to consider the impact of dynamic interactions, such as components, software, and operating processes. However, there is currently no simple, easy-to-use tool for assessing the availability of these dynamic systems.

    pdf9p minhxaminhyeu3 12-06-2019 5 0   Download

  • This article presents a security module based on a field programmable gate array (FPGA) to mitigate man-in-the-middle cyber attacks. Nowadays, the FPGA is considered to be the state of the art in nuclear power plants I&C systems due to its flexibility, reconfigurability, and maintainability of the FPGA technology; it also provides acceptable solutions for embedded computing applications that require cybersecurity.

    pdf8p minhxaminhyeu3 25-06-2019 5 0   Download

  • This study investigated the annual exposure limits of various countries, which can be used as an indicator in evaluating workers' internal exposure to radioactive aerosol during pipe cutting in the process of decommissioning nuclear power plants, and the growth and dynamics of aerosol. Also, to evaluate it, the authors compared/analyzed the cases of aerosol generated when activated pipes are cut in the process of nuclear power plants and the codes for evaluating internal exposure.

    pdf11p minhxaminhyeu3 25-06-2019 8 0   Download

  • This article presents a new design of earthquake instrumentation that is suitable for quick decisionmaking after the seismic event at the nuclear power plant (NPP). The main objective of this work is to ensure more availability of the NPP by expediting walk-down period when the seismic wave is incident. In general, the decision-making to restart the NPP after the seismic event requires more than 1 month if an earthquake exceeds operating basis earthquake level.

    pdf9p minhxaminhyeu3 25-06-2019 5 0   Download

  • Three-dimensional (work-site) reconstruction models of dismantling fields are useful for workers to observe the conditions of dismantling field situations without visiting the actual fields. This study, based on AR and work-site reconstruction models, developed and evaluated an information reference system. The evaluation consists of questionnaires and interview surveys administered to six nuclear power plant workers who used this system, along with a scenario.

    pdf7p minhxaminhyeu3 25-06-2019 5 0   Download

  • The importance of performing Level 3 probabilistic safety assessments (PSA) along with a general interest in assessing multi-unit risk has been sharply increasing after the Fukushima Daiichi nuclear power plant (NPP) accident. However, relatively few studies on multi-unit Level 3 PSA have been performed to date, reflecting limited scenarios of multi-unit accidents with higher priority.

    pdf9p minhxaminhyeu3 25-06-2019 6 0   Download

  • Residual stress is a critical element in determining the integrity of parts and the lifetime of welded structures. It is necessary to estimate the residual stress of a welding zone because residual stress is a major reason for the generation of primary water stress corrosion cracking in nuclear power plants. That is, it is necessary to estimate the distribution of the residual stress in welding of dissimilar metals under manifold welding conditions. In this study, a cascaded support vector regression (CSVR) model was presented to estimate the residual stress of a welding zone.

    pdf8p minhxaminhyeu4 26-06-2019 10 1   Download

  • In this research, we propose big data analysis as an attractive alternative and attempt to identify the attitudes of the public on nuclear power. Specifically, we used common big data analyses to analyze consumer opinions via SNS (Social Networking Services), using keyword analysis and opinion analysis. The keyword analysis identified the attitudes of the public toward nuclear power.

    pdf5p minhxaminhyeu4 26-06-2019 7 0   Download

  • Pipe wall thinning in the secondary piping system of a nuclear power plant is currently a major problem that typically affects the safety and reliability of the nuclear power plant directly. Regular in-service inspections are carried out to manage the piping system only during the overhaul. Online thickness monitoring is necessary to avoid abrupt breakage due to wall thinning.

    pdf8p minhxaminhyeu5 30-06-2019 6 0   Download

  • This paper introduces the development of a transient monitoring system to detect the early stage of a transient, to identify the type of the transient scenario, and to inform an operator with the remaining time to turbine trip when there is no operator's relevant control. This study focused on the transients originating from a secondary system in nuclear power plants (NPPs), because the secondary system was recognized to be a more dominant factor to make unplanned turbine-generator trips which can ultimately result in reactor trips.

    pdf8p minhxaminhyeu5 30-06-2019 10 0   Download

  • Due to economic growth and increasing population, energy demands must be satisfied in a sustainable manner assuring inherent safety, efficiency and minimized environmental impact. Nuclear power has long posed a dilemma for environmentalists and scientists alike. On the one hand it is seen as a cheap, clean energy source whilst on the other some have concerns over its ability to dispose of radioactive waste.

    pdf440p ktcn_1 10-07-2012 60 16   Download

  • Energy demands due to economic growth and increasing population must be satisfied in a sustainable manner assuring inherent safety, efficiency and no or minimized environmental impact. New energy sources and systems must be inherently safe and environmentally benign. These considerations are among the reasons that lead to serious interest in deploying nuclear power as a sustainable energy source.

    pdf380p ktcn_1 10-07-2012 65 12   Download

  • We are fortunate to live in incredibly exciting and incredibly challenging time. Energy demands due to economic growth and increasing population must be satisfied in a sustainable manner assuring inherent safety, efficiency and no or minimized environmental impact. These considerations are among the reasons that lead to serious interest in deploying nuclear power as a sustainable energy source.

    pdf0p ktcn_1 10-07-2012 48 10   Download

  • The world of the twenty first century is an energy consuming society. Due to increasing population and living standards, each year the world requires more energy and new efficient systems for delivering it. Furthermore, the new systems must be inherently safe and environmentally benign. These realities of today’s world are among the reasons that lead to serious interest in deploying nuclear power as a sustainable energy source.

    pdf0p 123859674 04-07-2012 50 5   Download

  • (bq) part 2 book "power plant engineering" has contents: diesel power plant, gas turbine power plant, nuclear power plant, hydro electric power plants, electrical system, pollution and its control.

    pdf237p bautroibinhyen20 06-03-2017 26 5   Download



p_strKeyword=Nuclear Power Engineering

nocache searchPhinxDoc


Đồng bộ tài khoản