![](images/graphics/blank.gif)
Operating pressure
-
In the mineral processing industry, not only concentrates but also tailings need to be dewatered. The test samples were Cam Duong apatite concentrated and tailing ore, Ta Phoi copper concentrated and Sin Quyen tailing ore, Cua Ong fine coal,and Dak Nong red mud.
10p
viwalton
02-07-2024
1
1
Download
-
The study concluded that when an organization is forced through the external sources such as legislation, environment protection agencies and customers they tend to follow the GSCMP. These practices in turn lead towards the operational efficiency of the firms. The limitations and future research areas are provided in the study.
9p
longtimenosee10
26-04-2024
4
1
Download
-
Part 1 of ebook "Surface production operations: Facility piping and pipeline systems (Volume III)" includes the following main contents: Chapter 1 - Overview of facility piping and pipeline systems; Chapter 2 - Piping standards, codes, and recommended practices; Chapter 3 - Material requirements, piping materials; Chapter 4 - Piping system components; Chapter 5 - Engineering drawings, data sheets and symbols; Chapter 6 - Fluid flow and pressure drop; Chapter 7 - Choosing a line size and wall thickness;...
556p
khuynhlinhnguyet1009
05-04-2024
5
1
Download
-
Continued part 1, part 2 of ebook "Surface production operations: Facility piping and pipeline systems (Volume III)" includes the following main contents: Chapter 8 - Relief, vent and flare disposal systems; Chapter 9 - Piping system design, layout, supports, and piping vessels and equipment; Chapter 10 - Pipe expansion and flexibility; Chapter 11 - Pipeline systems; Chapter 12 - Pressure testing and nondestructive examination; Chapter 13 - Pipeline pigging; Chapter 14 - Pipeline operations;...
558p
khuynhlinhnguyet1009
05-04-2024
5
1
Download
-
The research examines the influence of three organizational pressures (such as, government, customer and rivals) on performance associated with environment and operations. These three organizational forces are analyzed by adopting green supply chain management (GSCM), considering the senior management and examining social capital in the supply chain between buyers and sellers. Information was obtained by an email questionnaire from buying companies in Indonesian manufacturing sector.
9p
longtimenosee06
27-03-2024
3
2
Download
-
Part 1 book "Veterinary anesthetic and monitoring equipment" includes content: Medical gas cylinders and pipeline systems; oxygen concentrators; small animal anesthetic machines and equipment; large animal anesthesia machines and equipment; anesthetic vaporizers; anesthetic ventilators; humidification and positive pressure equipment; waste anesthetic gas collection and consequences; hazards of the anesthetic delivery system and operating room fires,... and other contents.
294p
muasambanhan03
05-01-2024
12
2
Download
-
"Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems" covers straight seam, doublesubmerged-arc-welded steel pipe suitable for high pressure service, 16 in. (406 mm) and larger in outside diameter, with wall thicknesses from 5⁄16 to 11⁄2 in. (7.9 to 38 mm). The pipe is intended for fabrication of fittings and accessories for compressor or pump-station piping. Pipe ordered to this specification shall be suitable for bending, flanging (vastoning), corrugating, and similar operations.
5p
hth_hn_vn
10-12-2023
9
5
Download
-
This specification covers 8 and 9 % nickel-alloy steel forged or rolled flanges, fittings, valves, and parts intended for use in welded pressure vessels for low-temperature service. The specification is applicable to forgings with maximum section thickness of 3 in. [75 mm] in the double normalized and tempered condition and 5 in. [125 mm] in the quenched and tempered condition. Forgings under this specification are intended for service at operating temperatures not lower than −320 °F [−196 °C] for Type I or −275 °F [−170 °C] for Type II or higher than 250 °F [121 °C].
4p
hth_hn_vn
10-12-2023
8
3
Download
-
This specification covers carbon steel pipe made by the centrifugal casting process intended for use in high-temperature, high-pressure service. Pipe ordered under this specification shall be suitable for fusion welding, bending, and other forming operations.
4p
hth_hn_vn
10-12-2023
6
4
Download
-
This specification covers nominal wall thickness, seamless, cold-drawn carbon steel tubing intended for use in hydraulic systems and in other similar applications where forming operations require tight radius bending and flaring.
3p
hth_hn_vn
10-12-2023
10
4
Download
-
This specification covers nonstandard as-forged fittings, valve components, and parts for glass-lined piping and pressure vessel service. Mechanical properties are certified on the basis of test material subjected to heat treatments to simulate glass-coating operations.
3p
hth_hn_vn
10-12-2023
7
4
Download
-
At approximately 5:00 AM on December 16, 2016, a rapid and deep-seated landslide was triggered by intense rainfall in the Van Hoi irrigation reservoir in Binh Dinh province, Vietnam. The landslide generated an impulsive wave with a height of approximately 20 m, resulting in severe damage to the reservoir operation station.
17p
viisac
15-09-2023
7
3
Download
-
The rapid development of internet technology and artificial intelligence drives the demand for flexible sensors. Compared with vacuum technology and solution method, the fabrication of flexible sensors by pencil writing directly has advantages such as low cost, simple operation, low temperature, and no pollution.
12p
viberbers
09-08-2023
8
4
Download
-
This study analyzes the quarter car braking model to determine the effect of the wheel slip ratio (λ) on the friction coefficient (µ) during the braking of the car. The results of braking distance, deceleration, and brake pressure are considered and analyzed to select a suitable braking system for the operating conditions of the designed truck.
7p
viwhitewolf
11-07-2023
5
4
Download
-
To evaluate the treatment results of severe traumatic brain injury without intracranial hematoma by decompressive craniectomy. Methods: An uncontrolled intervention study on 45 patients with severe traumatic brain injury, no intracranial hematoma, high intracranial pressure above 20 mmHg, unresponsive to medical therapy, and operated decompressive craniectomy at Viet Duc University Hospital from May 2017 to December 2022.
8p
viwolverine
07-07-2023
4
1
Download
-
In the paper, the Station Blackout accident accompanied with IVR implementation has been analyzed for VVER1000/V320 reactor by using MELCOR code 1.8.6. Four SBO scenarios have been proposed for the study, among, two SBO scenarios with long-term high pressure showed that the failure of lower head occurred early due to high pressure and high temperature causing creep-rupture, and the external cooling only delayed the failure of lower vessel.
15p
vidumbledore
06-01-2023
23
2
Download
-
Steam jet-cooking allows for efficient dissolution of cationic starch in paper production as it operates above the boiling point of water at elevated pressures. However, the processes involved during jet-cooking and its consequences on dissolution and finally paper properties have not been fully resolved so far.
11p
viginny
30-12-2022
3
2
Download
-
This work addresses the conceptual design of a submerged nuclear power plant, where a horizontal cylindrical hull, placed on the floor of a sea or an artificial lake, hosts an integral pressurized Small Modular Reactor (SMR).
10p
vironald
15-12-2022
12
4
Download
-
There is a long-standing and growing interest in Molten Salt Reactors (MSRs) mainly because of their potential advantages in terms of safety, sustainable fuel cycle, and the high melting and boiling points of salt which allow operations at high temperatures and atmospheric pressure with potential merits in terms of cost
12p
vironald
15-12-2022
15
5
Download
-
Low temperature co-fired ceramics (LTCC) technology has been successfully used in microelectronics, automotive, and telecommunication applications. However, their generally high permittivity is unfavorable for micromachined devices operated at high frequencies.
10p
vironald
15-12-2022
7
3
Download
CHỦ ĐỀ BẠN MUỐN TÌM
![](images/graphics/blank.gif)